10.0
|
14
|
PCD 14 Migration Task (V2V)
|
Direct upgrade to 14SU2 is not supported. When the destination version is 14 SU2 and the source version is 10.0, then the
Cisco Prime Collaboration Deployment (PCD) must be used for migration.
If the destination version is 14 SU2 and the source version 10.0 is in FIPS mode, then the Cisco Prime Collaboration Deployment
(PCD) must be in (or placed in) non-FIPS mode.
|
Not supported
|
10.5
|
14
|
PCD 14 Migration Task (V2V)
|
Run pre-upgrade-check COP file.
Direct upgrade to 14SU2 is not supported. When the destination version is 14 SU2 and the source version is 10.5, then the
Cisco Prime Collaboration Deployment (PCD) must be used for migration.
If the destination version is 14 SU2 and the source version 10.5 is in FIPS mode, then either:
|
Not supported
|
Fresh Install with Data Import (V2V)
|
|
Not supported
|
11.0
|
14
|
PCD 14 Migration Task (V2V)
|
Run pre-upgrade-check COP file.
If the destination version is 14 SU2 and the source version 11.0 is in FIPS mode, then either:
|
Not supported
|
Fresh Install with Data Import (V2V)
|
|
Not supported
|
11.5
|
14
|
Direct Refresh Upgrade
|
Via OS Admin or CLI
|
-
Run pre-upgrade-check COP file.
-
If the Unified CM source is older than 11.5.1.22900-28, then install the following COP file: cop ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
-
If the IM and Presence Service source is older than 11.5.1.22900-6, then install the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
-
If you want to upgrade IM and Presence Service from release 11.5.1.18900-15 to 14, use the following COP file: ciscocm.V11.5.1_CSCvv25961_add_diffie_C0085-1.cop.sgn.
|
Supported
|
Direct Refresh Upgrade
|
Via PCD Upgrade Task
|
-
Run pre-upgrade-check COP file.
-
If the Unified CM source is older than 11.5.1.22900-28, then install the following COP file: cop ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
-
If the IM and Presence Service source is older than 11.5.1.22900-6, then install the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
-
If you want to upgrade IM and Presence Service from release 11.5.1.18900-15 to 14, use the following COP file: ciscocm.V11.5.1_CSCvv25961_add_diffie_C0085-1.cop.sgn.
-
If the destination version is 14 SU2 and the source version 11.5 is in FIPS mode, then either:
|
Supported
|
PCD 14 Migration Task (V2V)
|
Run pre-upgrade-check COP file.
If the destination version is 14 SU2 and the source version 11.5 is in FIPS mode, then either:
|
Not supported
|
Fresh Install with Data Import (V2V)
|
|
Not supported
|
12.0
|
14
|
Direct Refresh Upgrade
|
Via OS Admin or CLI
|
-
Run pre-upgrade-check COP file.
-
If the Unified CM source is older than 12.0.1.24900-19, then install the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
-
If the IM and Presence Service source is older than 12.0.1.21000-34, then install the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
|
Supported
|
Direct Refresh Upgrade
|
Via PCD Upgrade Task
|
-
Run pre-upgrade-check COP file.
-
If the Unified CM source is older than 12.0.1.24900-19, then install the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
-
If the IM and Presence Service source is older than 12.0.1.21000-34, then install the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
|
Supported
|
PCD 14 Migration Task (V2V)
|
Run pre-upgrade-check COP file.
If the source version is Release 12.0(1) of Unified Communications Manager (12.0.1.10000-10), then you must install the following
COP file: ciscocm-slm-migration.k3.cop.sgn. This is not required if the source version is higher, for example, Release 12.0(1)SU1.
|
Not supported
|
Fresh Install with Data Import (V2V)
|
|
Not supported
|
12.5
|
14
|
Direct Standard Upgrade (simple upgrades)
|
Via OS Admin or CLI
|
-
Run pre-upgrade-check COP file.
-
If the Unified CM source is older than 12.5.1.14900-63, then install the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
-
If the IM and Presence Service source is older than 12.5.1.14900-4, then install the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
|
Supported
|
Direct Standard Upgrade
|
Via PCD Upgrade Task
|
-
Run pre-upgrade-check COP file.
-
If the Unified CM source is older than 12.5.1.14900-63, then install the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
-
If the IM and Presence Service source is older than 12.5.1.14900-4, then install the following COP file: ciscocm.enable-sha512sum-2021-signing-key-v1.0.cop.sgn.
-
If the destination version is 14 SU2 and the source version 12.5 is in FIPS mode, then either:
|
Supported
|
PCD 14 Migration Task (V2V)
|
Run pre-upgrade-check COP file.
If the destination version is 14 SU2 and the source version 12.5 is in FIPS mode, then either:
|
Not supported
|
Fresh Install with Data Import (V2V)
|
|
Not supported
|
14 or 14SU1
|
14SU2
|
Direct Standard Upgrade (simple upgrades)
|
Via OS Admin or CLI
|
Run pre-upgrade-check COP file.
|
Supported
|
Direct Standard Upgrade
|
Via PCD Upgrade Task
|
Run pre-upgrade-check COP file.
|