Cisco TelePresence Content Server Release 7.0 Virtual Machine Installation Guide for Existing Customers
Available Languages
Table of Contents
Installation Prerequisites Checklist
Obtain License and Option Keys from Old TCS
Migrations options for Existing Customers
Migrating Data from Old TCS to Shared Network Location
Installing VM Content Server on Existing Hardware
Installing VMware vSphere ESXi
Installing Windows Server 2012 Standard R2
Installing SQL Server 2012 database server
Migrating Data from Shared Network Location to TCS VM
Obtaining Documentation and Submitting a Service Request
Cisco TelePresence Content Server Release 7.0 Virtual Machine Installation Guide for Existing Customers
This document provides instructions for installing Cisco TelePresence Content Server Release 7.0 as a virtualized application on a VMware vSphere Hypervisor (ESXi) system.
- Recommended Platform
- Limitations and Restrictions
- Installation Prerequisites Checklist
- SQL Sever 2012 Support
- Before You Begin
- Obtain License and Option Keys from Old TCS
- Migrations options for Existing Customers
- Migrating Data from Old TCS to Shared Network Location
- Installing VM Content Server on Existing Hardware
- Installing TCS Installer
- Migrating Data from Shared Network Location to TCS VM
- Related Documentation
- Obtaining Documentation and Submitting a Service Request
Recommended Platform
These are the supported OVA requirements for UCS C220 Content Server hardware (Third-Generation, Fourth-Generation, BE7K and Third Party Hardware):
Content Server Release 7.0 is not supported on First-Generation and Second-Generation Content Server Hardware.
These are the supported OVA requirement for BE6K Content Server hardware.
Note Any other UCS models conforming to the Tested Reference Configuration (TRC) or a better TRC should be supported by the tested virtual machine configuration.
Limitations and Restrictions
- Table 1 describes the Content Server hardware and VMware vSphere Hypervisor (ESXi) software version compatibility.
Table 1 Content Server Hardware and VMware ESXi Software Compatibility
Yes, with VMware Cisco custom ISO image 1 available here:
https://my.vmware.com/web/vmware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere/5_1#custom_iso
ESXi to download:
Cisco Custom Image for ESXi 5.1.0 GA Install CDYes, with VMware Cisco custom ISO image 1 available here:
https://my.vmware.com/web/vmware/info/slug/datacenter_cloud_infrastructure/vmware_vsphere/5_5#custom_iso
ESXi to Download:
Cisco Custom Image for VMware ESXi 5.5.0 GA Install CDVirtual machine loses network connectivity intermittently for the following product versions:
This issue would occur in the following environments, due to the driver bundled with Microsoft Windows 2012:
- The virtual machine is Windows 2012 or Windows 2012 R2.
- The virtual machine is using E1000 or E1000E driver.
A work around for this issue is to use VMXNET3 instead of E1000 or E1000e driver.
For more information see the following article:
https://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2109922
Installation Prerequisites Checklist
1. Customer needs to purchase R-VMTCS-MIG-K9 PID to move from physical appliance TCS to VM TCS.
Note If the customer have an existing contract, this migration PID is free of cost.
2. Download the VM Content Server Release 7.0 software by using the external download location link that is provided in the E-delivery notification email:
a. Content Server software image
b. OVA template that is specific for the host hardware
c. System configuration scripts
3. Confirm that you have this system software available for installation:
a. Windows Server 2012 Standard R2 Service Pack 1
b. VMware vSphere Hypervisor (ESXi) software version that is specific for the Content Server second- or third-generation hardware (see Table 1 ).
c. SQL Server 2012 Express or Enterprise or Standard Edition.
4. Before installing VMware ESXi vSphere on the host server confirm that:
a. Virtualization Technology (VT) is enabled in the BIOS
b. “Virtual Machine Startup/Shutdown” is configured to “Allow Virtual machines to start and stop automatically with the system” and the VM Content Server has been moved to the Automatic startup section
c. Valid NTP server is configured that is the same NTP server that will be specified in the Content Server.
SQL Sever 2012 Support
Earlier SQL Server 2005 was being installed internally as local database server by the TCS installer. In 7.0, the approach is changed. Internal installation of SQL Server 2005 was dropped and now SQL Server 2012 is required as a prerequisite for TCS installation.
So before installation, A SQL Server instance named TCS must be present at local machine. The edition of SQL Server 2012 can be any of Standard editions, Enterprise Edition or Express edition.
If user wants to install Express edition, it can be downloaded from the following location: https://www.microsoft.com/en-in/download/details.aspx?id=29062 , download the file ENU\x86\SQLEXPR_x86_ENU.exe
All the present service packs for SQL Server 2012 (RTM, SP1 and SP2) are supported by TCS Installer.
SQL Server 2012 x86 and x64 version is supported by TCS installer.
Before You Begin
Before installing VM Content Server Release 7.0 on existing second- or third-generation hardware, you will need to:
- Obtain the license and option keys from the Content Server registry and create a license text file to restore the keys on the VM Content Server.
- Use the Cisco TelePresence Content Server Migration Assistant Tool (Migration Assistant) to migrate the data and configuration settings from the existing hardware to shared network location.
Obtain License and Option Keys from Old TCS
Copy the license and option keys from the Content Server registry. Follow these steps:
a. Log in to the Content Server by using Windows Remote Desktop.
b. Press Windows + R to launch the Run application.In the Open field, enter regedit and click OK .
c. In Registry Editor navigate to the following path:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\TANDBERG\TCS
For Content Server Release 5.x, navigate to the following path:
HKEY_LOCAL_MACHINE\SOFTWARE\TANDBERG\TCS
d. Locate the SerialNumber and ReleaseKey in the Data column. Copy and save the serial number and release key in a text file. For example:
0772262265091631
49A30107
e. In Registry Editor navigate to the following path:
HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\TANDBERG\TCS\OptionKeys
For Content Server Release 5.x, navigate to the following path:
HKEY_LOCAL_MACHINE\SOFTWARE\TANDBERG\TCS\OptionKeys
f. Locate the option keys in the Name column. Copy and save the option keys in a text file. For example:
115361R5-1-84E863EF
115361L2-1-D6734B87
115361R5-2-68DB53FA
115361C1-1-D42D15A3
115361HD1-1-034A588C
Migrating Data from Old TCS to Shared Network Location
Run the Migration Assistant on the existing source Content Server to copy the media and configuration settings to a shared network location.
The existing TCS may be running in one of the following mode.
- If existing TCS is running in Cluster mode, follow the below Step 1, Step 2 and Step 3.
- If existing TCS is running in Standalone or NAS mode, skip Step1 and Step 2 and follow only Step 3.
Step 1 Remove all servers except for the source Content Server from cluster.
Step 2 Remove the last (source) Content Server from cluster. The source server becomes a stand-alone Content Server with NAS.
Step 3 Go to the below link and follow the Step 1 to Step 9 to migrate the data to shared network location.
http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/6_0/release/notes/tcs-6-1-ma-rn.html
Installing VM Content Server on Existing Hardware
Tip It is recommended to follow the steps given in the guide for a base installation to confirm that no software discrepancies occur while installing TCS.
Complete these tasks to install VM Content Server Release 7.0 on existing hardware:
1. Installing VMware vSphere ESXi
3. Installing Windows Server 2012 Standard R2
4. Local Policy SettingInstalling Roles and Features
6. Installing SQL Server 2012 database server
Installing VMware vSphere ESXi
Install VMware vSphere ESXi on the host Content Server. (See Table 1 for the ESXi version.)
For ESXi Release 5.1, see the VMware release notes here:
https://www.vmware.com/support/vsphere5/doc/vsphere-esx-vcenter-server-51-release-notes.html
For ESXi Release 5.5, see the VMware release notes here:
https://www.vmware.com/support/vsphere5/doc/vsphere-esx-vcenter-server-55-release-notes.html
Deploy OVA to Host
These instructions represent a typical installation. The Deploy OVF Template wizard dynamically changes to reflect the host configuration.
Step 1 Log in to the vSphere client to access the ESXi Host.
Step 2 Select File > Deploy OVF Template .
Step 3 On the Source page, Browse to the location of the OVA file that is specific to the host appliance. Click Next .
Note For TCS 7.0, OVA file is S_7_0_TCSVM_Bundle.zip and for BE6K, OVA file is S_7_0_TCSBE6K_Bundle.zip.
Step 4 On the Name and Location page, enter the Name for the VM Content Server guest, for example “Virtual_TCS”. Click Next .
Step 5 On the Disk Format page, confirm that the Thick Provision Lazy Zeroed default disk format is selected. Click Next .
Step 6 On the Ready to Complete page:
a. Confirm the deployment settings.
b. Select the Power on after deployment check box.
Step 7 The installation process begins and a progress bar is displayed. The Content Server OVA is now deployed as a guest on the VM host.
Installing Windows Server 2012 Standard R2
These instructions represent a typical installation.
Step 1 Obtain the Windows Server 2012 Standard R2 software to begin installation process.
Step 3 Depending on your Windows Server media type, perform one of these steps:
a. Insert the Windows 2012 DVD in DVD drive. In ESXi, connect the DVD drive letter by using the ESXi option Connect/Disconnect the CD/DVD devices of Virtual Machine > Connect to <DVD drive letter> .
b. Mount the Windows 2012 ISO image file in ESXi by using the option Connect/Disconnect the CD/DVD devices of Virtual Machine > Connect to ISO Image on local disk and browse the Windows Server ISO image file.
Step 4 Press CTRL + ALT + Insert to boot from the DVD or the mounted ISO image.
Step 5 If prompted, choose Windows Server 2012 R2 Standard (Server with GUI) x64 .
Step 6 In the Install Windows Server screen, choose Custom (Advanced).
Step 7 Create two partitions on the host while installing Windows:
- First partition for program files with a minimum of 100 GB space.
- Second partition for media files with the remainder of available space (450 GB).
Note In case of BE6K platform, create two partition of the following sizes:
- First partition for program files with a minimum of 50 GB space.
- Second partition for media files with the remainder of available space (250 GB)
Note The drive letter might differ in your OS. Go to Disk Management to change the drive to E:.
Step 8 Follow the prompts to complete the Windows Server installation.
a. Right click the Content Server VM node. Select Guest > Install/Upgrade VMware Tools .
b. Click the Console tab. In the Console window double click the mounted drive (VMware Tools).
c. Double click setup64.exe to launch the Setup wizard. Choose Typical to complete the installation.
d. When installation is complete, click Finish . Click Restart to restart the system.
Step 10 Go to the console to configure the Content Server networking parameters. Assign the IP address, the netmask, the default gateway, and the DNS server address. For more information, see the Cisco TelePresence Quick Start Guide on Cisco.com.
Step 11 Go to My Computer > Properties and enable Remote Desktop services.
Installing Roles and Features
Step 1 Install Internet Information Services (IIS8). On VM host, navigate to Server manager > Dashboard. Click on Add roles and Features.
Step 2 On Select Server Roles page, click the WebServer IIS check box. A pop-up appears for installing the dependent features, click Add Features to continue and click Next.
Step 3 On Select Features page, select Net framework 3.5 and ASP.Net 4.5 as shown in the below image. Also select Windows Server backup and Desktop Experience. A pop-up appears for installing the dependent features, click Add Features to continue and click Next.
Step 4 On the Select Role Services page, select all the sub features under Web Server. Click Next.
Step 5 On the Confirmation Installation Selection page, click on ‘specify an alternate source path’. Mount the Windows Server 2012 R2 standard Edition image to a drive. On the Specify alternate source path page, specify the path <OS Mounted drive letter>:\sources\sxs, as shown in the image. Click OK.
Step 6 On Confirmation Installation selection page, click Install.
Step 7 Once feature installation is completed, click Close. Restart the system.
Local Policy Setting
To add the rights to the local administrator account, follow these steps:
Step 1 Log on to the computer as a user, who has administrative credentials.
Step 3 Click Run, type ‘Control admintools’ and then click OK.
Step 4 Double-click Local Security Policy.
Step 5 In the Local Security Settings dialog box, click Local Policies,
Step 6 Double-click User Rights Assignment, and then double-click Backup Files and Directories.
Step 7 In the Backup Files and Directories Properties dialog box, click Add User or Group.
Step 8 In the Select User or Groups dialog box, type the user account that is being used for setup, and then click OK two times.
Step 9 Repeat the procedure for the other two policies that are mentioned in the “Local policies” section.
On the File menu, click Exit to close the Local Security Settings dialog box.
Installing SQL Server 2012 database server
Complete the following steps to install SQL server 2012:
Step 1 Under Installation tab, click ‘New SQL Server stand-alone installation or add features to an existing installation’.
Step 2 Click ‘I accept the license terms’.
Step 4 Check the Database Engine Services box and click Next.
Step 5 In Instance Name, click Named instance radio button and enter the instance name as TCS.
Step 7 In the Service Account, choose Use the built-in System account (Local system, or Network service).
Note SQL server collation should be set to Latin1_General_CI_AS, 'Dictionary, case insensitive, 1252 character set'.
Step 8 In the Authentication Mode, you can click any of the two given modes:
Note If Mixed mode is selected, click Enter and Confirm the SA (system administrator) password.
Installing TCS Installer
Step 1 Copy the S_7_0_TCSVM_Bundle.zip file to a folder on your system and extract the files. Launch the command prompt and change the directory to the folder location.
Note For TCS 7.0, file name is S_7_0_TCSVM_Bundle.zip.
Step 2 Follow the below steps for TCS VM:
a. In the S_7_0_TCSVM_Bundle.zip extracted directory, create a TCSLic.txt file by using the licensing information in this format:
<<Virtual Serial No>>
<<Release Key>>
<<Recording 5 Key>>
<<Live 2 Key>>Use the license keys obtained from the section Obtain License and Option Keys from Old TCS
Note For TCS 7.0, extracted directory is S_7_0_TCSVM_Bundle.zip. In the license text file, make sure that there are no extra spaces before or after the license keys.
Step 3 In the command prompt, run the PreInstaller.cmd from the S_7_0_TCSVM_Bundle.zip folder to configure the Content Server Pre-Installer.
Note For TCS 7.0 configuration, run S_7_0_TCSVM_Bundle.zip
Step 4 Run S7_0_VM.exe to install the VM Content Server software on the appliance.
Step 5 Run the PostInstaller.cmd from the VMScripts folder in the command prompt to configure the Post-Installer. This will reboot the system.
Step 6 To make sure the newly created TCS VM is Up and Running. Launch TCS UI in a web browser.
Migrating Data from Shared Network Location to TCS VM
To migrate the data from shared network location to VM TCS, follow the below steps:
Step 1 Add the newly created TCS VM to the same domain that was used in Old TCS.
Note Follow the below Step 2, if the Old TCS was in NAS or Cluster mode. Skip Step 2, if Old TCS was in Standalone mode.
Step 2 Add the newly created TCS VM to the same NAS that was used in Old TCS.
Step 3 Run the Migration Assistant on the newly created TCS VM to restore the media and configuration settings from the shared network location.
Go to the below link and follow the Step 10 to Step 17 to migrate the data from shared network location to newly created TCS VM.
http://www.cisco.com/c/en/us/td/docs/telepresence/tcs/6_0/release/notes/tcs-6-1-ma-rn.html
Note Follow the below Step 4, if Old TCS was in Cluster mode.
Step 4 When you finish the data migration, add the destination Content Server to the cluster as the first cluster member. Add additional cluster members, as needed.
Related Documentation
http://www.cisco.com/en/US/products/ps11347/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps10493/tsd_products_support_series_home.html
http://www.cisco.com/en/US/products/ps12130/products_installation_and_configuration_guides_list.html
Information About Accessibility and Cisco Products
For information about the accessibility of this product, contact the Cisco accessibility team at accessibility@cisco.com.
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service request, and gathering additional information, see What’s New in Cisco Product Documentation at: http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html .
Subscribe to What’s New in Cisco Product Documentation , which lists all new and revised Cisco technical documentation, as an RSS feed and deliver content directly to your desktop using a reader application. The RSS feeds are a free service.
This document is to be used in conjunction with the documents listed in the “Related Documentation” section.
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: www.cisco.com/go/trademarks . Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1110R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
FeedbackContact Cisco
- Open a Support Case
- (Requires a Cisco Service Contract)