Cisco Nexus 6000 Series NX-OS Unicast Routing Command Reference
P Commands
Downloads: This chapterpdf (PDF - 74.0KB) The complete bookPDF (PDF - 4.5MB) | Feedback

P Commands

Table Of Contents

P Commands

protocol shutdown (OSPF)


P Commands


This chapter describes the Cisco NX-OS Open Shortest Path First (OSPF) commands that begin with P.

protocol shutdown (OSPF)

To shut down an Open Shortest Path First (OSPF) instance, use the protocol shutdown command. To disable this function, use the no form of this command.

protocol shutdown

no protocol shutdown

Syntax Description

This command has no arguments or keywords.

Command Default

The OSPF instance is enabled by default when configured.

Command Modes

Router configuration mode

VRF configuration mode

Command History

Release
Modification

6.0(2)N1(1)

This command was introduced.


Usage Guidelines

Use the protocol shutdown command to disable an instance of OSPF without removing the configuration.

This command requires the LAN Base Services license.

Examples

This example shows how to disable OSPF 209:

switch(config) router ospf 209
switch(config-router)# protocol shutdown
 
   

Related Commands

Command
Description

show ip ospf

Displays general information about OSPF routing instances.