R Commands
This chapter describes the Cisco NX-OS PIM commands that begin with R.
restart pim
To restart the IPv4 Protocol Independent Multicast (PIM) process, use the restart pim command.
restart pim
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
|
|
6.0(2)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to restart the PIM process:
switch(
config)#
restart pim
Related Commands
|
|
ip pim flush-routes |
Enables flushing routes when the PIM process is restarted. |