R Commands
This chapter describes the Cisco NX-OS MSDP commands that begin with R.
restart msdp
To restart the Multicast Source Discovery Protocol (MSDP) process, use the restart msdp command.
restart msdp
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
|
|
6.0(2)N1(1) |
This command was introduced. |
Usage Guidelines
This command requires the LAN Base Services license.
Examples
This example shows how to restart the MSDP process:
switch(
config)#
restart msdp
Related Commands
|
|
ip msdp flush-routes |
Enables flushing routes when the MSDP process is restarted. |