Network Processing Engine and Network Services Engine Installation and Configuration
Preface
Downloads: This chapterpdf (PDF - 115.0KB) The complete bookPDF (PDF - 7.18MB) | Feedback

Preface

Table Of Contents

Preface

Document Revision History

Objectives

Organization

Related Documentation

Obtaining Documentation and Submitting a Service Request


Preface


This preface describes the objectives and organization of this document and explains how to find additional information on related products and services. This preface contains the following sections:

Document Revision History

Objectives

Organization

Related Documentation

Obtaining Documentation and Submitting a Service Request

Document Revision History

The Document Revision History below records technical changes to this document.

Document Revision Version
Date
Change Summary

OL-4448-12

December, 2008

Added information about Cisco uBR7225VXR support on the NPE-G2.

OL-4448-11

June, 2008

Added information about the SFP-GE-F module.

OL-4448-10

February, 2008

Updated uBR7200-NPE-G2 support.

OL-4448-09

January, 2008

Added uBR7200-NPE-G2 support.

OL-4448-08

December, 2006

Added CWDM SFP module configuration information for the NPE-G2.

OL-4448-07

September, 2006

Added the Port Adapter Jacket Card support information for NPE-G1 and NPE-G2.

OL-4448-06

August, 2006

Added 2GB DIMM information for the NPE-G2.

OL-4448-05

May, 2006

AddedNPE-G2 information.

OL-4448-04

October, 2005

Added warning statement numbers and additional optical cleaning document title and URL.

OL-4448-03

August 11, 2005

Added enabling the second CPU information as well as show commands and output.


Objectives

This document includes an overview of each network processing engine (NPE) or network services engine (NSE), instructions for removing and installing an NPE or NSE, steps for verifying that the installed NPE or NSE initializes the system after you power up the router, configuration instructions, and troubleshooting information.

The NPEs are supported in the following Cisco 7200 series routers and Cisco 7200 VXR routers:

Cisco 7200 series routers, consisting of the 2-slot Cisco 7202, 4-slot Cisco 7204 and Cisco 7204VXR, and the 6-slot Cisco 7206 and Cisco 7206VXR

Cisco 7206VXR as a router shelf in the AS5800 Universal Access Server


Note The NSE-1 is supported only in the Cisco 7204VXR and Cisco 7206VXR routers. The NPE-G1 is supported only in the Cisco 7204VXR, Cisco 7206VXR, and Cisco uBR7246VXR routers.


The NPEs are supported in the following Cisco uBR7200 series universal broadband routers:

Cisco uBR7223 (1 port adapter slot and 2 cable interface and line card slots)

Cisco uBR7246 (2 port adapter slots and 4 cable interface line card slots)

Cisco uBR7246VXR (2 port adapter slots, 4 cable interface line card slots, and 1 Cisco Cable Clock Card slot)

Cisco uBR7225VXR (2 cable interface line card slots)


Note See the individual product chapters for the specific platforms supported by the NPEs or NSE-1.


Organization

This document contains the following chapters:

:

Section
Title
Description

Chapter 1

NPE-100, NPE-150, and NPE-200 Overview

Describes the NPE-100, NPE-150, and NPE-200—components, system management functions, and memory specifications and configuration.

Chapter 2

NPE-175 and NPE-225 Overview

Describes the NPE-175 and NPE-225—components, system management functions, and memory specifications and configuration.

Chapter 3

NPE-300 and NPE-400 Overview

Describes the NPE-300 and NPE-400—components, system management functions, and memory specifications and configuration.

Chapter 4

NSE-1 Overview

Describes the NSE-1—components, system management functions, and memory specifications and configuration.

Chapter 5

NPE-G1 Overview

Describes the NPE-G1—components, system management functions, and memory specifications.

Chapter 6

NPE-G2 Overview

Describes the NPE-G2—components, system management functions, and memory specifications.

Chapter 7

NPE-G1 and NPE-G2 Installation and Configuration Information

Provides installation and configuration information for the NPE-G1 and NPE-G2.

Chapter 8

Preparation for Installation

Describes safety considerations, tools required, and procedures you should perform before the actual installation.

Chapter 9

Removing and Installing the NPE or NSE

Describes the procedures for installing and removing the network processing engine or network services engine in the supported platforms.

Chapter 10

Configuration Tasks and Troubleshooting Information

Provides instructions for configuring the NSE-1 and troubleshooting information for both the NPEs and NSE-1. It also provides power supply removal information.


Related Documentation

Your router and the Cisco IOS software running on it contain extensive features and functionality, which are documented in the following resources:

Cisco IOS software:

For configuration information and support, refer to the modular configuration and modular command reference publications in the Cisco IOS software configuration documentation set that corresponds to the software release installed on your Cisco hardware.


Note You can access Cisco IOS software configuration and hardware installation and maintenance documentation on the World Wide Web at http://www.cisco.com. Translated documentation is available at http://www.cisco.com/public/countries_languages.shtml.


For the NPE-G1, see the NPE-G1 Read Me First document, which is available at the following URL:

http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/ubr7246vxr/upgrade/guide/15066R.html

For the Cisco uBR7200-NPE-G1, see the Cisco uBR7200-NPE-G1 Read Me First document, which is available at the following URL:

http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/ubr7246vxr/upgrade/guide/15066R.html

For information on the Cisco 7200 series routers, refer to the following publications:

Your Cisco 7200 series routers contain extensive features and functionality, which are documented in the following resources:

Cisco 7200 Series Routers Documentation Roadmap at http://www.cisco.com/en/US/docs/routers/7200/roadmaps/7200_series_doc_roadmap/3512.html for a list of all Cisco 7200 series routers documentation and troubleshooting tools and information.

Cisco 7200 Series Routers Port Adapter Documentation Roadmap at http://www.cisco.com/en/US/docs/routers/7200/roadmaps/7200_series_port_adapter_doc_roadmap/3530.html for a list of all Cisco 7200 series routers-supported port adapter documentation.

Cisco 7200 Series Routers Troubleshooting Documentation Roadmap at http://www.cisco.com/en/US/docs/routers/7200/roadmaps/7200_series_trblshoot_doc_roadmap/3518.htmll for links to troubleshooting tools, utilities, and Tech Notes.

For information about the Cisco uBR7200 series routers, refer to the following publications:

Cisco uBR7200 Series Universal Broadband Router Hardware Installation Guide at:
http://www.cisco.com/en/US/docs/cable/cmts/ubr7200/installation/guide/ub72khig.html

Cisco uBR7200 Series Configuration Notes at:
http://www.cisco.com/en/US/products/hw/cable/ps2217/products_installation_and_configuration_guides_list.html

For information about the Cisco AS5800 Universal Access Server, refer to the following publications:

Cisco AS5800 Universal Access Server Hardware Installation Guide at: http://www.cisco.com/en/US/docs/routers/access/as5800/hardware/installation/guide/5800_hig.html

Cisco AS5800 Universal Access Server Regulatory Compliance and Safety Information at: http://www.cisco.com/en/US/products/hw/univgate/ps509/products_regulatory_approvals_and_compliance09186a00800c9843.html

To view Cisco documentation or obtain general information about the documentation, refer to the following sources:

"Obtaining Documentation and Submitting a Service Request" section

Cisco Information Packet that shipped with your router or switch

Obtaining Documentation and Submitting a Service Request

For information on obtaining documentation, submitting a service request, and gathering additional information, see the monthly What's New in Cisco Product Documentation, which also lists all new and revised Cisco technical documentation, at:

http://www.cisco.com/en/US/docs/general/whatsnew/whatsnew.html

Subscribe to the What's New in Cisco Product Documentation as a Really Simple Syndication (RSS) feed and set content to be delivered directly to your desktop using a reader application. The RSS feeds are a free service and Cisco currently supports RSS version 2.0.