The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This appendix provides legacy information about AVC licensing and feature activation for:
Note This information applies only to devices using Cisco IOS and Cisco IOS XE releases before IOS XE Gibraltar 16.10.1.
Cisco AVC software components are provided as part of each Cisco IOS and Cisco IOS XE release.
Activating full AVC functionality requires additional feature licensing and activation. License and activation details vary according to the platform. For information about supported platforms, see AVC Supported Platforms. For platform-specific details about activating features, see AVC Feature Activation.
For full AVC capabilities, including the ability to recognize 1000+ applications using NBAR2, the Application Experience, or AppX, license is the recommended way to procure AVC functionality. Application Experience licenses provide a cost-effective Intelligent WAN (IWAN) solution, combining AVC, WAN Optimization, and Performance Routing (PfR) capabilities.
Combined hardware-software offerings simplify the procurement of ISR G2, ISR 4000, ASR 1001, ASR 1001X, and ASR 1002-X routers with the Application Experience licenses. Software licenses may be used to add Application Experience capabilities to previously purchased routers.
Table C-1 and Table C-2 describe recommended OS images and feature licenses for a variety of platforms. For detailed, up-to-date information about images and licenses for a particular platform, refer to the documentation associated with the platform.
Application Experience Licensing
For complete details about Application Experience licensing, see:
Table C-1 Recommended OS Image and License—IOS Platforms
|
|
|
---|---|---|
For information, see: |
Application Experience (AppX) For information about purchasing and installing the AppX license, see: |
|
For information, see: |
Application Experience (AppX) For information about purchasing and installing the AppX license, see: |
|
Application Experience (AppX) For information about purchasing and installing the AppX license, see: |
1.For the ISR G2 family, the Data license also enables the Right to Use the AVC feature set. |
Table C-2 Recommended OS Image and License—IOS XE Platforms Using IOS XE Earlier than 16.10.1
|
|
|
---|---|---|
Application Experience (AppX) For information about purchasing and installing the AppX license, see: |
For additional information about licensing and other Cisco AVC details pertaining to Cisco ASR 1000 Series routers, see:
Cisco Application Visibility and Control FAQ
The following sections describe the Cisco IOS/IOS XE image and license to use for full AVC feature activation, and the activation process for different platforms:
|
|
---|---|
See Table C-1 |
Cisco ISR G2 platforms support temporary 90-day activation of Application Experience (AppX) features, for evaluation, before obtaining a full license, using the license boot module
CLI command. Activating AppX features provides full AVC functionality.
To temporarily activate AppX features, load the AppX package and reboot the router. Execute the following from the console:
Step 2 license boot module module-name technology-package datak9
To display the module-name for your router, use the following command:
To display the software packages and features supported by your router, enter the following command:
For additional information about activating an evaluation license, see Software Activation on Cisco Integrated Services Routers and Cisco Integrated Service Routers G2 :
http://www.cisco.com/c/en/us/td/docs/routers/access/sw_activation/SA_on_ISR.html#wp1155619
To deactivate the AppX features, unload the AppX package and reboot the router. Execute the following from the console:
Step 2 no license boot module module-name technology-package datak9
Note This information applies only to devices using Cisco IOS XE releases before IOS XE Gibraltar 16.10.1.
|
|
---|---|
See Table C-2 |
For information about purchasing and installing the AES or AIS license for Cisco ASR 1000 series routers, see:
Note This information applies only to devices using Cisco IOS XE releases before IOS XE Gibraltar 16.10.1.
|
|
---|---|
See Table C-2 |
The Cisco ISR 4000 Series supports temporary 90-day activation of Application Experience (AppX) features, for evaluation, before obtaining a full license, using the license boot level
CLI command. Activating AppX features provides full AVC functionality.
To temporarily activate AppX features, load the AppX package and reboot the router. Execute the following from the console:
To deactivate the AppX features, unload the AppX package and reboot the router. Execute the following from the console:
Note This information applies only to devices using Cisco IOS XE releases before IOS XE Gibraltar 16.10.1.
|
|
---|---|
See Table C-2 |
For information about purchasing and installing the Application Experience (AppX) license, see Cisco IOS and IOS XE Licenses.
Cisco CSR 1000V Cloud Services Routers support temporary 90-day activation of Premium license features, for evaluation, before obtaining a full license, using the license boot level
CLI command. Activating Premium features provides full AVC functionality.
To temporarily activate Premium features, execute the following from the console:
To deactivate the Premium features, reboot the router and execute one of the following from the console:
For information about images and licenses for the Cisco CSR 1000V, see:
Cisco CSR 1000V Series Cloud Services Router Release Notes
Note This information applies only to devices using Cisco IOS and Cisco IOS XE releases before IOS XE Gibraltar 16.10.1.
For information about Application Experience (AppX) licensing, see:
http://www.cisco.com/c/en/us/solutions/enterprise-networks/application-experience/index.html
http://www.cisco.com/c/en/us/products/cloud-systems-management/software-activation-on-integrated-services-routers-isr/index.html
The feature activation section for each platform indicates whether it supports use of a universal IOS XE software image. The universal software image includes all IOS XE functionality. You can purchase new software capabilities at any time for a deployed router. With the purchase, you receive a Product Activation Key (PAK). To activate the purchased functionality, you enter the PAK into the Software Activation License (SAL), which is preinstalled on the device.
The software activation licensing system simplifies IOS XE software deployment. The IOS XE software image remains unchanged, regardless of which functionality has been activated, and only one archive image must be maintained per device.