Guest

Cisco 800 Series Routers

Cisco 880 Series Integrated Services Routers Data Sheet

  • Viewing Options

  • PDF (1.0 MB)
  • Feedback

The Cisco® 880 Series Integrated Services Routers (ISRs) combine Internet access, security, voice, and wireless services onto a single, secure device that is simple to use and manage for small businesses and enterprise small branch offices and teleworkers. The Cisco 880 Series delivers features including firewall, content filtering, VPNs, and wireless LANs (WLANs) at broadband speeds to small offices. Easy deployment and centralized management features enable enterprises or service providers to deploy the Cisco 880 Series in small branch offices or small businesses.

Product Overview

Cisco 880 Series Integrated Services Routers are fixed-configuration routers that provide collaborative business solutions for secure voice and data communication to small businesses and enterprise teleworkers. They offer concurrent broadband services over third-generation (3G), Metro Ethernet, and multiple DSL technologies to provide business continuity. Wireless 802.11n and 3G offer LAN and WAN mobility. The routers provide the performance required for concurrent services, including firewall, intrusion prevention, content filtering, and encryption for VPNs; optional 802.11g/n for mobility; and quality-of-service (QoS) features for optimizing voice and video applications. In addition, the web-based Cisco Configuration Professional configuration tool simplifies setup and deployment. Centralized management capabilities give network managers visibility and control of the network configurations at the remote site.

Cisco 880 Series Integrated Services Routers offer:

High performance for broadband access in small offices and small branch-office and teleworker sites

Collaborative services with secure analog, digital voice, and data communication

Business continuity and WAN diversity with redundant WAN links: Fast Ethernet, Multimode G.SHDSL (Ethernet in the First Mile [EFM] and ATM), Multimode DSL (very-high-data-rate DSL 2 [VDSL2] and asymmetric DSL 2 and 2+ [ADSL2 and ADSL2+, respectively]), 3G, and ISDN

Voice-enabling features:

- Cisco Unified Communications Manager Express (5 user), which offers innovative key system and small private-branch-exchange (PBX) capabilities for small and medium-sized business customers

- Survivable Remote Site Telephony (SRST) voice continuity for enterprise small branch-office and teleworker sites

- Cisco Unified Border Element (Cisco UBE) IP-IP voice gateway functions for connecting to Session Initiation Protocol (SIP) trunking services as a replacement for Primary Rate Interface (PRI) or foreign-exchange-office (FXO) voice connectivity to the service provider. Note: Cisco Unified Border Element support for the Cisco 880 Series has feature limitations as compared to the Cisco Integrated Services Routers Generation 2 (ISR G2) Routers. Go to http://www.cisco.com/go/cube for the full set of Cisco Unified Border Element features. Cisco Unified Border Element limitations on Cisco 880 Routers are listed later in this document.

Enhanced security, including:

- Firewall with advance application and control for email, Instant Messaging (IM), and HTTP traffic

- Site-to-site remote-access and dynamic VPN services: IP Security (IPsec) VPNs (Triple Data Encryption Standard [3DES] or Advanced Encryption Standard [AES]), Dynamic Multipoint VPN (DMVPN), Group Encrypted Transport VPN with onboard acceleration, and Secure Sockets Layer (SSL) VPN

- Intrusion prevention system (IPS): An inline, deep-packet inspection feature that effectively mitigates a wide range of network attacks

- Content filtering: A subscription-based integrated security solution that offers category-based reputation rating; keyword blocking; and protection against adware, malware, spyware, and Uniform Resource Locator (URL) blocking

Four-port 10/100 Fast Ethernet managed switch with VLAN support; two ports support Power over Ethernet (PoE) for powering IP phones or external access points

Secure 802.11g/n access-point option based on draft 802.11n standard with support for autonomous or Cisco Unified WLAN architectures

Newer Cisco 880 Series (part numbers C881-K9, C886VA-K9, C886VAJ-K9, C887VA-K9, and C887VA-M-K9), which are fanless, providing a quiet, comfortable working environment in small offices

CON/AUX port for console or external modem

One USB 1.1 port for security eToken credentials, booting from USB, and loading configuration

Easy setup, deployment, and remote-management capabilities through web-based tools and Cisco IOS® Software

Figure 1 shows a Cisco 881 Integrated Services Router.

Figure 1. Cisco 881 Integrated Services Router with Integrated 802.11n Access Point

Tables 1 and 2 list the routers that currently make up the Cisco 880 data, voice, and SRST series, respectively.

Table 1. Cisco 880 Series Data Models

Models

WAN Interface

LAN Interfaces

802.11g/n Option

Embedded 3G

Integrated ISDN Dial Backup

C881

10/100-Mbps Fast Ethernet

4-port 10/100-Mbps managed switch

No

No

No

Cisco 881

10-/100-Mbps Fast Ethernet

4-port 10-/100-Mbps managed switch

Yes (Cisco 881W)

Yes (Cisco 881G)

No

C886VA

Multimode VDSL2/ADSL2/2+ over ISDN

4-port 10-/100-Mbps managed switch

No

No

Yes

C886VAJ

Multimode VDSL/ADSL Annex J over ISDN

4-port 10-/100-Mbps managed switch

No

No

Yes

Cisco 886 VA

Multimode VDSL2/ADSL2/2+ over ISDN

4-port 10-/100-Mbps managed switch

Yes (Cisco 886VAW)

Yes (Cisco 886VAG)

Yes

Cisco 887VA

Multimode VDSL2/ADSL2/2+ over basic telephone service

4-port 10-/100-Mbps managed switch

Yes (Cisco 887VAW)

Yes (Cisco 887VAG)

No

Cisco 886

ADSL2/2+ over ISDN (Annex B)

4-port 10-/100-Mbps managed switch

Yes (Cisco 886W)

Yes (Cisco 886G)

Yes

C887

Multimode VDSL/ADSL over POTS

4-port 10-/100-Mbps managed switch

No

No

No

C887VA-M

Multimode VDSL/ADSL Annex-M over POTS

4-port 10-/100-Mbps managed switch

No

No

No

Cisco 887

ADSL2/2+ over basic telephone service (Annex A)

4-port 10-/100-Mbps managed switch

Yes (Cisco 887W)

Yes (Cisco 887G)

Yes

Cisco 887V

VDSL2 over basic telephone service

4-port 10-/100-Mbps managed switch

Yes (Cisco 887V)

Yes (Cisco 887VG)

Yes

Cisco 888

G.SHDSL (ATM)

4-port 10-/100-Mbps managed switch

Yes (Cisco 888W)

Yes (Cisco 888G)

Yes

Cisco 888E

G.SHDSL (EFM)

4-port 10-/100-Mbps managed switch

Yes (Cisco 888W)

Yes (Cisco 888EG)

Yes

Cisco 888EA

Multimode G.SHDSL (EFM/ATM)

4-port 10-/100-Mbps managed switch

No

No

Yes

Table 2. Cisco 880 Series Voice Models

Models

WAN Interface

LAN Interfaces

Voice Ports

802.11g/n Option

Cisco881V

10-/100-Mbps Fast Ethernet

4-port 10-/100-Mbps managed switch

4 foreign-exchange-station (FXS) ports, 2 Basic Rate Interface(BRI) ports, and 1 foreign-exchange-office (FXO) port for public-switched-telephone-network (PSTN) fallback

No

Cisco887VA-V

Multimode VDSL2/ADSL2/2+ over POTS

4-port 10-/100-Mbps managed switch

4 foreign-exchange-station (FXS) ports and 2 Basic Rate Interface(BRI) ports

Yes (Cisco887VA-V-W-K9)

Cisco 881 SRST

10-/100-Mbps Fast Ethernet

4-port 10-/100-Mbps managed switch

4 foreign-exchange-station (FXS) ports and 1 FXO port for public-switched-telephone-network (PSTN) fallback

Yes (Cisco 881 SRSTW)

Cisco 888 SRST

G.SHDSL

4-port 10-/100-Mbps managed switch

4 FXS ports and 1 Basic Rate Interface (BRI) port for PSTN fallback

Yes (Cisco 888 SRSTW)

Cisco 881 with Cisco Unified Border Element

10-/100-Mbps Fast Ethernet

4-port 10-/100-Mbps managed switch

No

No

Cisco 886VA with Cisco Unified Border Element

Multimode VDSL2/ADSL2/2+ over ISDN

4-port 10-/100-Mbps managed switch

No

No

Cisco 887VA with Cisco Unified Border Element

Multimode VDSL2/ADSL2/2+ over basic telephone service

4-port 10-/100-Mbps managed switch

No

No

Cisco 888E with Cisco Unified Border Element

G.SHDSL (EFM)

4-port 10-/100-Mbps managed switch

No

No

Cisco 888 with Cisco Unified Border Element

G.SHDSL (ATM)

4-port 10-/100-Mbps managed switch

No

No

The Cisco 880 Series is ideal for small branch offices and teleworkers who need to be connected to larger enterprise networks as well as small businesses for either voice or data applications. These routers help extend corporate networks to secure remote sites while giving users access to the same applications found in a corporate office. When users require WLAN access, visibility and control of network security are even more critical at the remote site. The Cisco 880 Series meets this need with a single device that combines integrated 802.11g/n capabilities with security features such as Wi-Fi Protected Access (WPA), including authentication with IEEE 802.1x with Cisco Extensible Authentication Protocol (LEAP) and Protected EAP (PEAP) and encryption with WPA Temporal Key Integrity Protocol (TKIP). (Refer to the wireless solution overview and security data sheet for more information.) The Cisco 880 Series models that include the integrated access point can use either autonomous or Cisco Unified WLAN modes. In Cisco Unified WLAN mode, as part of an enterprise WLAN architecture, all WLAN functions are centrally managed through Cisco Wireless LAN Controllers and the Cisco Wireless Control System (WCS).

Service providers and value-added resellers can take advantage of the Cisco 880 Series to provide a true business-class broadband service. Business customers are using broadband access to connect to the Internet or to connect offices together, and they require a platform that incorporates voice and security without sacrificing performance. The Cisco 881V and Cisco 887VA-V voice routers offer industry-leading voice gateway capability with the ability enable Cisco Unified Communications Manager Express or SRST as required. Many of these customers are connecting computers in offices through WLANs; having a single device for both WAN and WLAN access provides a new option for managed services. These customers also require a higher level of support to keep their networks operational. Services with these customers should be simple to set up, while allowing a level of remote management and troubleshooting to address support inquiries quickly. The Cisco 880 Series meets the requirements of small offices and managed services providers.

Figure 2 shows deployment scenarios.

Figure 2. Deployment Scenarios

Applications

The Cisco 880 Series is ideally suited for deployment in a small office or in a small office that is part of a large network, most often with a secure VPN connection. These types of offices can include the following:

Small remote office: The Cisco 880 Series can connect users in a small remote office, such as an insurance, lawyer, or sales office. When connecting to the main office, VPN encryption and integrated security such as firewall and intrusion prevention protect the network at the perimeter. The Cisco 880 with the Cisco Unified Border Element Series can also support connection to SIP trunking voice-over-IP (VoIP) services the service provider offers. Additionally, IT managers can centrally manage the remote site to quickly troubleshoot any network problems. For added reliability, customers can also use the integrated 3G or ISDN backup or connect through an external modem if the primary broadband link fails. Integrated secure unified WLAN connectivity simplifies the deployment and management devices at the remote site. Redundant WAN links offer business continuity, enabling nondisruptive business operation.

Virtual office: The Cisco 880 Series is ideal for corporate teleworkers who have a mix of broadband connection types such as DSL, 3G, and Metro Ethernet. The Cisco 880 Voice Gateway and SRST Series provides a secure virtual office with all the collaborative services such as data, voice, and fax services. SRST helps ensure voice services are operational in case of WAN link failure, and redundant WAN links help ensure business continuity. QoS features in the Cisco 880 Series allow for connection of an IP or analog phone to the router, giving voice traffic precedence over data applications. Integrated WLAN support in the Cisco 880 Series helps ensure that if wireless connectivity is used it is secure. (Refer to the Cisco Virtual Office Solution, http://www.cisco.com/go/cvo, for more information.)

Remote call-center agent: Similar to teleworking applications, this solution extends the Cisco IP Contact Center solution for telephone call-center agents to remote sites. With a high-quality, secure connection through the Cisco 880 Series, call-center agents can be dispersed away from costly call-center facilities while maintaining secure and productive voice and data access in their homes. SRST and business-continuity solutions in the Cisco 880 Series provide reliability and continuous business operation. Alternatively, the remote call-center agent can be provided with SIP trunking service with service demarcation provided by Cisco Unified Border Element features, and the central call center can forward calls to the remote call-center agent through the remote-office SIP trunk.

Retail VPN: Retail stores migrating from dialup connections for point-of-sale transactions can use the Cisco 880 Series to take advantage of low-cost broadband access with the required security to comply with payment-card-industry (PCI) and other data security requirements. They can then add multiple devices and applications to the store network to take advantage of the increased bandwidth and also incorporate optional WLAN support to enable secure mobility and enhance productivity.

Managed services: Service providers and value-added resellers can use the Cisco 880 Series as a platform to offer differentiated business-class security, voice, and WLAN services for small business customers. With built-in analog and digital voice ports and the ability to upgrade to a five-user Cisco Unified Communications Manager Express IP PBX, service providers can now offer all the Cisco Unified Communications benefits to small and medium-sized businesses. The SIP trunking connectivity features of the Cisco 880 with the Cisco Unified Border Element Series Router can provide the high-quality VoIP service needed through the service provider cloud.

Features and Benefits

Table 3 lists the features and benefits of the Cisco 880 Series Integrated Services Routers.

Table 3. Features and Benefits of Cisco 880 Series Routers

Feature

Benefit

Increased performance to run concurrent services

Cisco 880 Series Router performance allows customers to take advantage of broadband network speeds while running secure, concurrent data, voice, video, and wireless services.

Enhanced security

An integrated stateful and application inspection firewall provides network perimeter security.
High-speed IPsec 3DES and AES encryption offers data privacy over the Internet.
Intrusion prevention enforces security policy in a larger enterprise or service provider network.
Content filtering offers category-based URL classification and blocking, thus providing increased productivity and better use of company resources.

WAN diversity

Multiple WAN links include Fast Ethernet, multimode VDSL2/ADSL2/2+, multimode G.SHDSL, 3G, and ISDN.

Redundant WAN links

Redundant WAN links provide business continuity and WAN diversity.

Four-port 10-/100-Mbps managed switch

The Cisco 880 Series allows for connection of multiple devices in a small office, with the ability to designate a port as the network edge.
An optional external PoE adapter powers IP phones and external access points to avoid individual power supplies or power injectors.
VLANs allow for secure segmentation of network resources.

CON/AUX port

A single dual-purpose port provides direct connection to a console or external modem for management or backup access points.

Optional 802.11g/n access point

This broadband router offers a secure integrated access point in a single device.
This integrated Wi-Fi access point offers IEEE 802.11n 2.0 standard supportfor mobile access to high-bandwidth data, voice, and video applications through the use ofmultiple-input, multiple-output (MIMO) technologythat provides increased throughput, reliability, and predictability.
The Cisco 880 Series supports both autonomous and unified modes.

Real-time clock

A built-in real-time clock maintains an accurate date and time for applications that require an accurate time stamp, such as logging and digital certificates.

Voice gateway (supported on 881V and 887VA-V voice models)

The Cisco 881V and 887VA-V models provide voice gateway functions with the ability to upgrade to a five-user Cisco Unified Communications Manager Express or five-user SRST).

SRST (supported on SRST voice models)

SRST provides business continuity for voice when the WAN link fails by switching calls to the PSTN.

Cisco Unified Border Element (supported on Cisco Unified Border Element voice models)

Support for SIP trunk connectivity, including demarcation and interworking, is based on a Cisco Unified Border Element feature license.
Transcoding of media is not supported on the Cisco 880 Series Cisco Unified Border Element feature set.

Cisco Configuration Professional

Cisco Configuration Professional uses smart wizards and task-based tutorials, which resellers and customers can use to quickly and easily deploy, configure, and monitor a Cisco access router without requiring knowledge of the Cisco IOS Software command-line interface (CLI).

Unified wireless management

Configuration and management of access points is automated and simplified without manual intervention.
A unified hybrid remote-edge access point (HREAP) provides the following:

WLAN services to remote and branch offices without deploying a WLAN controller at each location

Central configuration and control of unified WLAN services for remote officesthrough a WAN link

Flexibility in setting up wireless access at remote locations by specifying how traffic is to be bridged or tunneled

Summary

Cisco 880 Series Integrated Services Routers combine increased network performance with advanced security to allow small-office customers to get the most from their broadband connections for both data and voice applications. With models supporting different broadband technologies such as DSL, 3G, and Metro Ethernet, the Cisco 880 Series can be deployed at any small-office location. Optional integrated 802.11g/n wireless capabilities provide true business-class WAN and WLAN access in a single solution. With the Cisco 880 Series, enterprise IT managers and service providers can take advantage of a solution that can be easily set up at the remote site and can be centrally managed to reduce ongoing operational costs.

Product Specifications

Cisco IOS Software Support

Table 4 lists the minimum Cisco IOS Software releases and the default Cisco IOS Software feature sets.

Table 4. Cisco IOS Software Releases and Default Cisco IOS Software Feature Sets

Models

Universal Image

Default Feature Set

First Cisco IOS Software Release

Cisco 881

Data

Advanced Security

12.4(20)T

Cisco 881 SEC, Embedded 3G

Data

Advanced IP

12.4(20)T, 15.1(4)M

Cisco 881V

Voice

Advanced IP*

15.1(4)M

Cisco 881 SRST

Voice

Advanced IP*

12.4(20)T

Cisco 886VA and 887VA

Data

Advanced Security

15.1(2)T

Cisco 886VA and 887VA WLAN

Data

Advanced Security

15.1(3)T

Cisco 886VA and 887VA Embedded 3G

Data

Advanced Security

15.1(4)M

Cisco 886 and 887

Data

Advanced Security

12.4(22)YB3

Cisco 886 and 887 SEC, 3G

Data

Advanced IP

12.4(22)YB3

Cisco 887V

Data

Advanced Security

12.4(22)YB, 12.4(24)T

Cisco 887V SEC, 3G

Data

Advanced IP

12.4(22)YB, 12.4(24)T

Cisco 887V WLAN

Data

Advanced Security

15.0(1)M

Cisco 887V 3G

Data

Advanced IP

15.0(1)M

Cisco 887VA-V

Voice

Advanced IP

15.1(4)M

Cisco 887VA-V-W

Voice

Advanced IP

15.1(4)M

Cisco 888

Data

Advanced Security

12.4(20)T

Cisco 888 SEC, 3G

Data

Advanced IP

12.4(20)T, 15.1(4)M

Cisco 888 SRST

Voice

Advanced IP*

12.4(20)T

Cisco 888E

Data

Advanced Security

15.1(1)T

Cisco 888E Embedded 3G

Data

Advanced IP

15.1(4)M

Cisco 888EA

Data

Advanced Security

15.2(2)T

Cisco 881, 886VA, 887VA, 888, 888E with Cisco Unified Border Element

Voice

Advanced IP

15.1(4)M

C881-K9, C886-K9, C886VAJ-K9, C887VA-K9, and C887VA-M-K9

Data

Advanced Security

15.3(3)M2, 15.4(1)T

Access-point software (ap801)

-

-

12.4(10b)JA3

* Cisco 881V, 887VA-V, 881 SRST, and 888 SRST run the Cisco 880 voice universal image, which shares the same data and security features as the Advanced IP feature sets of Cisco 880 data models.

Tables 5 and 6 list Cisco IOS Software features of the Cisco 880 Series.

Table 5. Cisco IOS Software Features on Cisco 880 Series: Advanced Security Feature Set (Default)

Feature

Description

IP and IP services features

Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)
Generic routing encapsulation (GRE) and Multipoint GRE (MGRE)
Cisco Express Forwarding
Standard 802.1d Spanning Tree Protocol
Layer 2 Tunneling Protocol (L2TP)
Network Address Translation (NAT)
Dynamic Host Configuration Protocol (DHCP) server, relay, and client
Dynamic Domain Name System (DNS)
DNS Proxy
DNS Spoofing
Access control lists (ACLs)

ATM features
(ADSL and G.SHDSL ATM models only)

ATM Variable Bit Rate real-time (VBR-rt)
ATM Unspecified Bit Rate (UBR), Constant Bit Rate (CBR), and Variable Bit Rate non-realtime (VBR-nrt)
ATM operations, administration, and maintenance (OA&M) support for F5 Continuity Check; segment and end‑to‑end loopback; and Integrated Local Management Interface (ILMI) support
TX ring adjustment
Virtual-circuit (VC) bundling
Per-VC queuing
Per-VC traffic shaping
10 ATM virtual circuits on the 886, 887, and 888 models
4 ATM virtual circuits on the 886VA and 887VA models
RFCs 1483 and 2684
Point-to-Point Protocol over ATM (PPPoA)
PPP over Ethernet (PPPoE)

Switch features

Auto Media Device In/Media Device Cross-Over (medium dependent interface (MDI)/MDI crossover (MDX)
Eight 802.1Q VLANs
MAC filtering
Two-port 802.3af and Cisco compliant PoE
Switched Port Analyzer (SPAN)
Storm Control
Smartports

Security features

Secure connectivity:

SSL VPN for secure remote access
Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256
Public-key-infrastructure (PKI) support
20 IPsec tunnels
Cisco Easy VPN Client and Server
NAT transparency

Zone-based policy firewall:

Stateful inspection transparent firewall
Advanced application inspection and control
Secure HTTP (HTTPS), FTP, and Telnet authentication proxy
Dynamic and static port security

QoS features

Low-Latency Queuing (LLQ)
Weighted Fair Queuing (WFQ)
Class-Based WFQ (CBWFQ)
Class-Based Traffic Shaping (CBTS) (on Fast Ethernet WAN ports and DSL ports in Packet Transport Mode [PTM] only)
Class-Based Traffic Policing (CBTP)
Policy-Based Routing (PBR)
Class-Based QoS MIB
Class of service (CoS)-to-differentiated services code point (DSCP) mapping

Management features

Cisco Configuration Professional
Cisco Configuration Express
Cisco Configuration Engine support
Cisco AutoInstall
IP service-level agreement (SLA)
Cisco IOS Embedded Event Manager (EEM)
CiscoWorks
Cisco Security Manager
Telnet, Simple Network Management Protocol Version 3 (SNMPv3), Secure Shell (SSH) Protocol, CLI, and HTTP management
RADIUS and TACACS+
Out-of-band management with ISDN S/T port or external modem through virtual auxiliary port
Cisco WCS for management of unified access points in models supporting WLAN

High-availability features

Virtual Router Redundancy Protocol (VRRP) (RFC 2338)
Hot Standby Router Protocol (HSRP)
Multigroup HSRP (MHSRP)
Dial backup with external modem through virtual auxiliary port
Dial backup with ISDN S/T port (select DSL models only)
3G backup (3G models only)

Number of recommended users

20

Table 6. Cisco IOS Software Features on Cisco 880 Series: WLAN Features (Available with Wireless Option)

Feature

Description

WLAN hardware

IEEE 802.11n draft 2.0 standards-based access point with 802.11 b/g compatibility
Automatic rate selection for 802.11g/n
Captive omnidirectional 2-dBi gain dipole antennas
2 x 3 MIMO radio operation
Removable antennas on Cisco 881W models
Wi-Fi 802.11n Draft v2.0 certified

WLAN software features

Autonomous or unified access point
Cisco WCS support for monitoring of autonomous-mode access points
Option to maximize throughput or maximize range
Software-configurable transmit power
Radio roles, including access point, root bridge, nonroot bridge, and workgroup bridge
Wi-Fi Multimedia (WMM) certification
Traffic specifications (TSPEC) Call Admission Control (CAC) to ensure voice quality is maintained
Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency

WLAN security features

Standard 802.11i
WPA and AES (WPA2)
EAP authentication: Cisco LEAP, PEAP, Extensible Authentication Protocol Transport Layer Security (EAP TLS), Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling (EAP-FAST), Extensible Authentication Protocol-Subscriber Information Module (EAP‑SIM), Extensible Authentication Protocol-Message Digest Algorithm 5 (EAP-MD5), and Extensible Authentication Protocol-Tunneled TLS (EAP-TTLS)
Static and dynamic Wired Equivalent Privacy (WEP)
Temporal Key Integrity Protocol/Simple Security Network (TKIP/SSN) encryption
MAC authentication and filter
User database for survivable local authentication using LEAP and EAP-FAST
Configurable limit to the number of wireless clients
Configurable RADIUS accounting for wireless clients
Pre-shared keys (PSKs) (WPA-small office or home office [WPA-SOHO])

Certifications

Service set identifiers (SSIDs)

16

Wireless VLANs

8

Encrypted wireless VLANs

8

Multiple broadcast service set identifiers (MBSSIDs)

16

Cisco IOS Software Advanced IP Services Feature Set (Optional Software Upgrade)

The Advanced IP Services software image has all the features of the Advanced Security software image with the addition of the features listed in Tables 7 through 10.

Table 7. Cisco IOS Software Features on Cisco 880 Series: Advanced IP Services Feature Set (Optional Software Upgrade)

Feature

Description

IP and IP services features

IPv4 and IPv6 Multicast
Open Shortest Path First (OSPF)
Border Gateway Protocol (BGP)
Enhanced Interior Gateway Routing Protocol (EIGRP)
Virtual Route Forwarding (VRF) Lite
Next Hop Resolution Protocol (NHRP)
Layer 2 Tunneling Protocol Version 3 (L2TPv3)
Bidirectional Forwarding Detection (BFD)
Web Cache Communication Protocol (WCCP)

Switch features

Internet Group Management Protocol Version 3 (IGMPv3) snooping
802.1x

Security features

Secure connectivity:

DMVPN
Tunnel-less Group Encrypted Transport VPN
IPsec stateful failover
VRF-aware IPsec
IPsec over IPv6
Adaptive control technology
SIP application layer gateway

Cisco IOS Firewall:

Firewall stateful failover
VRF-aware firewall

Content Filtering:

Subscription-based content filtering with Trend Micro
Support for Websense and SmartFilter
Cisco IOS Software black and white lists

Integrated threat control:

IPS
Control Plane Policing
Flexible Packet Matching
Network foundation protection

QoS features

Class-Based Weighted Random Early Detection (CBWRED)
Network-Based Application Recognition (NBAR)
Link fragmentation and interleaving (LFI)
Resource Reservation Protocol (RSVP)
Real-Time Transport Protocol (RTP) header compression (cRTP)
Differentiated Services (DiffServ)
QoS preclassify and prefragmentation
Hierarchical QoS (HQoS)

Metro Ethernet features

Ethernet Operations, Administration, and Maintenance (Ethernet OAM)
Ethernet Local Management Interface (Ethernet LMI)
Hierarchial QOS (HQoS)

IPv6 features

IPv6 addressing architecture
IPv6 name resolution
IPv6 statistics
IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-PT)
Internet Control Message Protocol Version 6 (ICMPv6)
IPv6 DHCP

Unified WLAN management

Unified access-point features:

Supported by wireless LAN controller and Cisco WCS
Configurable local or central switching for HREAP mode
Radio management through Cisco WCS
Transparent roaming with Mobility Groups

Table 8. Cisco IOS Software Features on Cisco 880V Series: Advanced IP Services Feature Set

Feature

Description

Cisco Voice Gateway

4 FXS ports and 2 Basic Rate Interface (BRI) port for PBX connectivity; 1 FXO port is available on the Cisco 881V SKU

Cisco Unified Communications Manager Express (CiscoUCME)/SRST version

Ability to upgrade to 5-user license of Cisco UCME/SRST; Version 8.6 and later are supported

Call-control signaling

H.323 Versions 1, 2, 3, and 4; Media Gateway Control Protocol (MGCP) 0.1 and 1.0; Skinny Client Control Protocol (SCCP); and SIP call-control protocols are supported.

ITU standard voice codecs

G.711, G.729, G.729a/b, G.723.1, G.726, and G.728, which are standards-based compression technologies allowing transmission of voice across IP, are supported. TheG.711 standard employs 64-kbps pulse code modulation (PCM) using either mu-law or a-law. Other codecsemploy lower bit rates.

Cisco Unified Communications Manager support

For SRST features for IP phones, refer to the SRST data sheet at: http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_data_sheets_list.html.

Cisco Unified Communications Manager support for analog and digital ports come with Releases 7.1(5), 8.5(1), and 8.6(2).

Telephony interface signalingsupport

Cisco 880 V supports the following signaling protocols:

FXS loop-start and ground-start signaling
FXO
Inbound signaling (such as dual-tone multifrequency [DTMF] and multifrequency support)
BRI QSIG

Voice features

Echo cancellation: This feature cancels echo on tail circuits up to 64 msec (configurable tail length).
Silence suppression and voice activity detection (VAD): Bandwidth is used only when someone is speaking. During silent periods of a phone call, bandwidth is available for data traffic.
Comfort-noise generation: This feature reassures the phone user that the connection is being maintained, even when no voice packets are being transmitted.
Caller ID support: Per-port caller ID (with per-call unblocking) is configurable over analog FXS.
Dial-plan mapping: This feature simplifies configuration and management through automatic mapping of dialed phone numbers to IP addresses.

Voice port-specific features

FXS: FXS provides battery polarity reversal detection and initiation for disconnect supervision and far-end answer supervision.
ISDN BRI network side and phantom power: The BRI port provides the ability to connect a private branch exchange (PBX) or private automatic branch exchange (PABX) configured as user side directly to the router. It also provides phantom power to accommodate equipment that requires it.
LED indicators show voice-processing resources and port status.

Fax and modem

Fax and modem pass-through allows fax and modem traffic to pass through a voice port.
Fax Relay provides a more robust protocol for fax transmission over packet networks. It also supports the T.37 and T.38 fax protocols.

High-performance flexible digital-signal-processor (DSP) architecture

Channel capacity: Cisco 880V supports up to four voice channels.
Flexible DSP architecture: There is no need to specify codec complexity at configuration. Anappropriate codec is dynamically selected when a call is established, while DSP resources are allocated optimally.
Feature upgrades: The DSP architecture allows for addition of new features through simple code updates.

Table 9. Cisco IOS Software Features on Cisco 880 SRST Series: Advanced IP Services Feature Set

Feature

Description

Cisco SRST version

SRST 7.0 and later are supported.

Call-control signaling

H.323 Versions 1, 2, 3, and 4, Media Gateway Control Protocol MGCP 0.1 and 1.0, Skinny Client Control Protocol (SCCP), and SIP call-control protocols are supported.

ITU standard voice codecs

G.711, G.729, G.729a/b, G.723.1, G.726, and G.728, which are standards-based compression technologies allowing transmission of voice across IP, are supported. TheG.711 standard employs 64-kbps pulse code modulation (PCM) using either mu-law or a-law. Other codecsemploy lower bit rates.

Cisco Unified Communications Manager support

For SRST features for IP phones, refer to the SRST data sheet at: http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_data_sheets_list.html.

Cisco Unified Communications Manager support for analog and digital ports comes with Releases 6.1(3), 7.0(2), and 7.1(3).

Telephony interface signalingsupport

Cisco 880 SRST supports the following signaling protocols:

FXS loop-start and ground-start signaling
FXO
Inbound signaling (such as dual-tone multifrequency [DTMF] and multifrequency support)
BRI QSIG

Voice features

Echo cancellation: This feature cancels echo on tail circuits up to 64 msec (configurable tail length).
Silence suppression and voice activity detection (VAD): Bandwidth is used only when someone is speaking. During silent periods of a phone call, bandwidth is available for data traffic.
Comfort-noise generation: This feature reassures the phone user that the connection is being maintained, even when no voice packets are being transmitted.
Caller ID support: Per-port caller ID (with per-call unblocking) is configurable over analog FXS.
Dial-plan mapping: This feature simplifies configuration and management through automatic mapping of dialed phone numbers to IP addresses.

Voice port-specific features

FXS: FXS provides battery polarity reversal detection and initiation for disconnect supervision and far-end answer supervision.
ISDN BRI network side and phantom power: The BRI port provides the ability to connect a private branch exchange (PBX) or private automatic branch exchange (PABX) configured as user side directly to the router. It also provides phantom power to accommodate equipment that requires it.
LED indicators show voice-processing resources and port status.

Fax and modem

Fax and modem pass-through allows fax and modem traffic to pass through a voice port.
Fax Relay provides a more robust protocol for fax transmission over packet networks. It also supports the T.37 and T.38 fax protocols.

High-performance flexible digital-signal-processor (DSP) architecture

Channel capacity: Cisco 880 SRST supports up to four voice channels.
Flexible DSP architecture: There is no need to specify codec complexity at configuration. Anappropriate codec is dynamically selected when a call is established, while DSP resources are allocated optimally.
Feature upgrades: The DSP architecture allows for addition of new features through simple code updates.

Table 10. Cisco IOS Software Features on Cisco 880 Series with Cisco Unified Border Element: Advanced IP Services Feature Set

Feature

Description

Cisco Unified Border Element version

Cisco Unified Border Element 7.0 and later are supported.

Call-control signaling

H.323 Versions 1, 2, 3, and 4; MGCP 0.1 and 1.0; SCCP; and SIP call-control protocols are supported.

ITU standard voice codecs

G.711, G.729, G.729a/b, G.723.1, G.726, and G.728, which are standards-based compression technologies that allow transmission of voice across IP, are supported. TheG.711 standard employs 64-kbps pulse code modulation (PCM) using either mu-law or a-law. Other codecsemploy lower bit rates.

Cisco Unified Communications Manager support

For SRST features for IP phones, refer to the SRST data sheet at: http://www.cisco.com/en/US/products/sw/voicesw/ps2169/products_data_sheets_list.html.

Cisco Unified Communications Manager support for analog and digital ports comes with Releases 6.1(3), 7.0(2), and 7.1(3).

Telephony interface signalingsupport

Cisco 880 SRST supports the following PSTN trunk signaling protocols:

FXS loop-start and ground-start signaling
FXO
Inbound signaling (such as dual-tone multifrequency [DTMF] and multifrequency support)
BRI QSIG

Cisco 880 Cisco Unified Border Element supports the following VoIP trunk signaling protocols:

Up to 15 SIP-to-SIP sessions. (no H.323 support)

Note: The Cisco 880 with Cisco Unified Border Element does not include DSP feature support such as transcoding or transrating.

Note: The Cisco 880 with Cisco Unified Border Element does not support concurrent operation of SRST or Cisco Unified Communications Manager Express.

Voice features

Echo cancellation: This feature cancels echo on tail circuits up to 64 msec (configurable tail length).
Silence suppression and VAD: Bandwidth is used only when someone is speaking. During silent periods of a phone call, bandwidth is available for data traffic.
Comfort-noise generation: This feature reassures the phone user that the connection is being maintained, even when no voice packets are being transmitted.
Caller ID support: Per-port caller ID (with per-call unblocking) is configurable over analog FXS.
Dial-plan mapping: This feature simplifies configuration and management through automatic mapping of dialed phone numbers to IP addresses.

Voice port-specific features

FXS: FXS provides battery polarity reversal detection and initiation for disconnect supervision and far-end answer supervision.
ISDN BRI network side and phantom power: The BRI port provides the ability to connect a PBX or PABX configured as user side directly to the router. It also provides phantom power to accommodate equipment that requires it.
LED indicators show voice-processing resources and port status.

System Specifications

Tables 11 and 12 list the system specifications for the Cisco 880 Series Routers.

Table 11. System Specifications

Feature

Description

Default and maximum flash memory

128 MB on Cisco 880 Series data, embedded 3G wireless WAN (WWAN), and Cisco Unified Border Element models
256 MB on Cisco 880 Series Voice and SRST models
256 MB on newer C881-K9, C886VA-K9, C886VAJ-K9, C887VA-K9 and C887VA-M-K9 models

WAN

Fast Ethernet
Multimode VDSL2 and ADSl2/2+ over ISDN with ISDN backup
Multimode VDSL2 and ADSl2/2+ over basic telephone service
ADSL2/2+ over ISDN with ISDN backup
ADSL2/2+ over basic telephone service with ISDN backup
VDSL2 over basic telephone service with ISDN backup
Multimode G.SHDSL (2- and 4-wire support) with ISDN backup
Fast Ethernet and 3G WAN for Code Division Multiple Access (CDMA) and high-speed downlink packet access (HSDPA)

LAN switch

Managed 4-port 10/100BASE-T with autosensing Media Device In/Media Device Cross-Over (MDI/MDX) forauto crossover

Standard 802.11g/n access point based on IEEE 802.11n draft 2.0 standard

Optional on all models

Console or auxiliary port

RJ-45

One USB 1.1 port for advanced security features such as security tokens or USB flash memory

One USB 1.1 port on Cisco 880 Series Routers
USB devices supported:

USB eTokens

USB flash memory

Note: The USB 1.1 port cannot be used for connecting external devices other than those specified at: http://www.cisco.com/en/US/prod/collateral/modules/ps6247/product_data_sheet0900aecd80232473.html.

ISDN BRI S/T

Available on:

Cisco 886, 886VA, 887, 887V, 888, and 888EA for out-of-band management and dial backup or primary

3G express card modem

Available on:

Cisco 881G, 886G, 887G, 887VG, and 888G for out-of-band management and backup or primary
Cisco 888G for out-of-band management and backup or primary

Note: Cisco 887VG currently ships with HSPA modem only.

External power supply

Universal 100 to 240 VAC input; 60W, 12 VDC output

Physical dimensions andweight

Product dimensions, nonwireless models (H x W x D):

1.9 x 12.8 x 9.8 in. (48 x 325 x 249 mm) (includes rubber feet)
1.75 x 12.8 x 9.8 in. (44 x 325 x 249 mm)(without rubber feet)

Product dimensions, wireless models (H x W x D):

1.9 x 12.8 x 10.4 in. (48 x 325 x 264 mm) (includes rubber feet)
1.75 x 12.8 x 10.4 in. (44 x 325 x 264 mm) (without rubber feet; excludes antennas)
Weight: 5.5 lb (2.5 kg) maximum

Power

Product power specifications:

AC input voltage: 100 to 240 VAC
Frequency: 50 to 60 Hz
Maximum output power: 60W
Output voltages: 12 VDC

Optional internal PoEwith external adapter:

Maximum output power: 80W
External output voltage: 48 VDC

Approvals and compliance

Emissions:

47 CFR Part 15: 2006
CISPR22: 2005
EN300386: V1.3.3: 2005
EN55022: 2006
EN61000-3-2: 2000 [Inc amd 1 and 2]
EN61000-3-3: 1995 [+ amd 1: 2001]
ICES-003 Issue 4: 2004
KN 22: 2005
VCCI: V-3/2006.04

Immunity:

CISPR24: 1997 [+ amd 1 and 2]
EN300386: V1.3.3: 2005
EN50082-1: 1992
EN50082-1: 1997
EN55024: 1998 [+ amd 1 and 2]
EN61000-6-1: 2001

The following are supported on teleworker models:

AS/NRZ 3548: 1992 Class B
CFR 47 Part 15 Class B
EN60555-2 Class B
EN55022 Class B
ICES-003, Issue 2, Class B, April 1997S

Certifications

Logo

Environmental operatingrange

Nonoperating temperature: -4 to 149°F (-20 to 65°C)
Nonoperating humidity: 5 to 95% relative humidity (noncondensing)
Nonoperating altitude: 0 to 15,000 ft (0 to 4570m)
Operating temperature

At sea level: 32 to 104°F (0 to 40°C)

Up 10,000 ft: 32 to 77°F (0 to 25°C)

Derating 2.7°F/10,000 ft (1.5°C/1,000 ft)

Operating humidity: 10 to 85% relative humidity (noncondensing)
Operating altitude: 0 to 10,000 ft (0 to 3000m)

Table 12. Wireless LAN and 3G Specifications

SRST Specifications

SRST specifications

Packet fax and voice DSP module PVDM2-16

FXS voice-port specifications:

Tip and ring interfaces for each FXS port (subscriber line interface card [SLIC])
Ring voltage
Ring frequency
Ring waveform
Ring load
Ringer Equivalence Number (REN)
Loop resistance
On- and off-hook characteristics
On-hook voltage (tip and ring)
Off-hook current
RJ-11 FXS port terminating impedance option

BRI voice-port specifications:

Interface type
Compliance
Safety conformance
ITU compliance
Interface
ISDN digital access
Physical connector
Phantom power

Wireless Specifications

Radio frequency band

2.4 GHz

Data rates supported

802.11b: 1, 2, 5.5, 6, 9, and 11 Mbps
802.11g: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, and 54 Mbps
802.11n: 1, 2, 5.5, 6, 9, 11, 12, 18, 24, 36, 48, 54,and m0-m15

Maximum transmit power (2-channel aggregate)

Note: Maximum power setting is subject to changes by channel and by region, depending on regulations.

802.11b 20 dBm
802.11g 17 dBm
802.11n 16 dBm

3G specifications

Data rates

CDMA: 850 and 1900 MHz
HSDPA: 850, 900, 1900, and 2100 MHz

DSL Specifications

Tables 13 through 21 list the DSL features specifications and DSL access multiplexer (DSLAM) interoperability support for the Cisco 880 Series Routers. For more information and details about DSLAM and line-card interoperability, please refer to the following document: What Is Cisco ISR and ISR G2 xDSL Interoperability?

Table 13. DSL Features Specifications

DSL Specifications

Multimode DSL (VDSL2 and ADSL2/2+)

(886VA and 887VA models)

Broadcom Chipset
Dying gasp
IEEE 802.1q VLAN tagging
Independent DSL firmware loading

VDSL2

ITU G.993.2 (VDSL2)
997 and 998 band plans
VDSL2 profiles: 8a, 8b, 8c, 8d, 12a, 12b, and 17a
U0 band support (25 - 276 kHz)
Ethernet PTM mode only based on IEEE 802.3ah 64/65 octet encapsulation
DELT Diagnostics Mode

ADSL2/2+

ADSL over basic telephone service with Annex A and Annex B ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)
ADSL over basic telephone service with Annex M (extended upstream bandwidth) G.992.3 (ADSL2) and G.992.5 (ADSL2+)

Cisco 887VA-M is optimized for PSD Mask EU-64 M9.

Cisco 887VA-M supports UK Annex M.

G.994.1 ITU Ghs
Reach-extended ADSL2 (G.922.3) Annex L for increased performance on loop lengths greater than 16,000 feet from central office
T1.413 ANSI ADSL DMT issue 2 compliance
DSL Forum TR-067 conformity
Inpulse Noise Protection (INP) and extended INP
Downstream Power Back-Off (DPBO)
ATM mode only

ADSL specifications

(886 and 887 models)

ST-Microelectronics 20190 Chipset
ADSL over basic telephone service with Annex A and Annex B ITU G. 992.1 (ADSL), G.992.3 (ADSL2), and G.992.5 (ADSL2+)
ADSL over basic telephone service with Annex M (extended upstream bandwidth) G.992.3 (ADSL2) and G.992.5 (ADSL2+)

Cisco 887-M is optimized for PSD Mask EU-64 M9.

Cisco 887M supports UK Annex M only with Huawei 5300 DSLAM and its EADB line card with customer-premises-equipment (CPE) firmware Version 4.0.17.

G.994.1 ITU G.hs
Reach-extended ADSL2 (G.922.3) Annex L for increased performance on loop lengths greater than 16,000 feet from central office
T1.413 ANSI ADSL DMT issue 2 compliance
DSL Forum TR-067 conformity
Does not provide interoperability with carrierless amplitude modulation/phase modulation (CAP)-based ADSL lines
Dying gasp
IEEE 802.1q VLAN tagging with Cisco IOS Software Release 15.1(1)T or later

VDSL2 specifications

(887V models)

Broadcom Chipset
ITU G.993.2 (VDSL2) over basic telephone service only
997 and 998 band plans, over basic telephone service only
VDSL2 profiles supported: 8a, 8b, 8c, 8d, 12a, 12b, and 17a
U0 band support (25276 kHz)
Ethernet PTM mode only based on IEEE 802.3ah 64/65 octet encapsulation
DELT Diagnostics Mode
IEEE 802.1q VLAN tagging

G.SHDSL (ATM mode) specifications (Cisco 888)

Conexant/Ikanos Chipset
2- and 4-wire modes
Symmetrical WAN speeds up to 2.304 Mbps over a single copper pair and up to 4.608 Mbps over two copper pairs using ITU-T G.991.2 Annex A and Annex B
Dying gasp; uses power status bit (Section 7.1.2.5.3 of G.991.2) for signaling

G.SHDSL (EFM mode) specifications (Cisco888E)

Conexant/Ikanos Chipset
2-wire mode
Symmetrical WAN speeds up to 2.304 Mbps over a single copper pair using ITU-T G.991.2 Annex A and Annex B
Symmetrical WAN speeds from 768 kbps to 5.696 Mbps over a single copper pair using ITU-T G.991.2 Annex F and Annex G
Symmetrical WAN speeds up to 22.784 Mbps over four copper pairs using IEEE 802.3ah EFM bonding
Wetting current (Section A.5.3.3 of G.991.2)
Dying gasp; uses power status bit (Section 7.1.2.5.3 of G.991.2) for signaling
Rate adaption

Multimode G.SHDSL (EFM/ATM) specifications (Cisco 888EA)

Lantiq Chipset
4-pair support
Compliance with standard based on ITU Recommendation G.991.2
Support for G.SHDSL Annexes A (U.S. signaling) and B (European signaling)
Support for Annexes F and G
Symmetrical WAN speeds up to 1 x 2304 kbps over single copper pair, up to 2 x 2304 kbps over two copper pairs, up to 3 x 2304 kbps over three copper pairs, and up to 4 x 2304 kbps over four copper pairs using ITU-T G.991.2 Annexes A and B
Symmetrical WAN speeds up to 1 x 5696 kbps over single copper pair, up to 2 x 5696 kbps over two copper pairs, up to 3 x 5696 kbps over three copper pairs, and up to 4 x 56964 kbps over four copper pairs using ITU-T G.991.2 Annexes F and G
Support for EFM bonding; supports up to four SHDSL pairs bonding
In ATM mode, support for maximum of 8 permanent virtual circuits (PVCs)
Support for dying gasp and wetting current
Support for point-to-point configuration
Support for 802.1Q, QinQ, trunk, and VLAN tagging
Support for ATM CoS and IP QoS features, 802.1P, and DSCP
Support for EFM (IEEE 802.3ah) OA&M
Ability to configure multiple G.SHDSL EFM EHWICs per Cisco 1921, 1941, 2900, and 3900 Series Routers
Compliance with single RJ-45 connector system requirements

Table 14. Multimode DSL DSLAM Interoperability for Cisco 887VA

DSLAM

VDSL2 over Basic Telephone Service Line-Card Chipset

ZTE 9806

Broadcom

Huawei MA5600

Broadcom

Table 15. Multimode DSL DSLAM Interoperability for Cisco 886VA

Siemens HIX 5300

Infineon

ECI 480

Infineon

Alcatel ASAM 7300

Globespan

Table 16. ADSL-over-ISDN DSLAM Interoperability for Cisco 886

DSLAM

ADSL2/2+ over ISDN Line-Card Chipset

Siemens HIX 5300

Infineon

ECI 480

Infineon

Alcatel ASAM 7300

Globespan

Table 17. ADSL over Basic Telephone Service DSLAM Interoperability for Cisco 887 and 887M

DSLAM

ADSL2/2+ over Basic Telephone Service Line-Card Chipset

Alcatel ASAM 7300

Broadcom (Annex A and Annex M)

ECI 480

Infineon (Annex A and Annex M)

Ericsson

Broadcom (Annex A and M)

Huawei 5600

Globespan (Annex A only)

Lucent Stinger

Globespan (Annex A and Annex M)

Table 18. VDSL2 DSLAM Interoperability for Cisco 887V

DSLAM

VDSL2 over Basic Telephone Service Line-Card Chipset

ZTE 9806

Broadcom

Huawei MA5600

Broadcom

Table 19. G.SHDSL DSLAM Interoperability for Cisco 888

DSLAM

G.SHDSL (2- and 4-Wire) Line-Card Chipset

ECI Hi-Focus SAM 480

Infineon

Alcatel ASAM7300

Conexant/Ikanos

Lucent Stinger

Conexant/Ikanos

Siemens Hix-5300

Infineon

Table 20. G.SHDSL DSLAM Interoperability for Cisco 888E

DSLAM

G.SHDSL (2- and 4-Wire) Line-Card Chipset

Huawei 5603

Infineon

Alcatel ISAM 7302

Infineon

Hatteras HN4000e

Infineon

Table 21. Multimode G.SHDSL DSLAM Interoperability for Cisco 888EA-K9

DSLAM

G.SHDSL (4-Pair) Line-Card Chipset

Huawei 5603

Infineon

Alcatel ISAM 7302

Infineon

Hatteras HN4000e

Infineon

Alcatel ASAM 7300

Lucent Stringer

ECI 480

Alcatel ISAM_7330_FTTN

Actelis ML698

Ordering Information

Table 22 lists ordering information for the Cisco 880 Series. To place an order, visit the Cisco ordering homepage.

Table 22. Ordering Information

Part Number

Product Name

Ethernet

C881-K9

Cisco 881 Ethernet Security Router

CISCO881-K9

Cisco 881 Ethernet Security Router

C881-CUBE-K9

Cisco 881 Ethernet Security Router with integrated CUBE Licenses

CISCO881-SEC-K9

Cisco 881 Ethernet Security Router with Advanced IP Services

CISCO881W-GN-A-K9

Cisco 881 Ethernet Security Router with 802.11n FCC Compliant

CISCO881W-GN-E-K9

Cisco 881 Ethernet Security Router with 802.11n ETSI Compliant

CISCO881W-GN-P-K9

Cisco 881 Ethernet Security Router with 802.11n Japan Compliant

Ethernet and 3G

CISCO881G-K9

Cisco 881 Ethernet Security Router with 3G

CISCO881GW-GN-A-K9

Cisco 881 Ethernet Security Router with 3G, 802.11n FCC Compliant

CISCO881GW-GN-E-K9

Cisco 881 Ethernet Security Router with 3G, 802.11n ETSI Compliant

CISCO881G-S-K9

Cisco 881G Ethernet Security Router with 3G Sprint

CISCO881G-V-K9

Cisco 881G Ethernet Security Router with 3G Verizon

CISCO881G-A-K9

Cisco 881G Ethernet Security Router with 3G GSM North America

C881G-U-K9

Secure Router with WAN FE and Embedded 3.5G HSPA with SMS/GPS

C881G-S-K9

Secure Router with WAN FE and Embedded 3G EVDO Rev A with SMS/GPS for Sprint Networks

C881G-V-K9

Secure Router with WAN FE and Embedded 3G EVDO Rev A with SMS/GPS for Verizon Wireless Networks

C881G-B-K9

Secure Router with WAN FE and Embedded 3G EVDO Rev A with SMS/GPS for BSNL Networks

C881G+7-K9

Secure Router with WAN FE and Embedded 3.7G HSPA+ Release 7 with SMS/GPS

C881G+7-A-K9

Secure Router with WAN FE and Embedded 3.7G HSPA+ Release 7 with SMS/GPS for AT&T Networks

Multi-mode DSL (VDSL2 and ADSl2/2+)

C886VA-K9

Cisco 886 VDSL/ADSL over ISDN Multi-mode Router

C886VAJ-K9

Cisco 886 VDSL/ADSL Annex J over ISDN Multi-mode Router

CISCO886VA-K9

Cisco 886VA router with VDSL2/ADSL2+ over ISDN

CISCO886VA-SEC-K9

Cisco 886VA Secure router with VDSL2/ADSL2+ over ISDN

C886VA-CUBE-K9

Cisco 886VA Secure router with VDSL2/ADSL2+ over ISDN and integrated CUBE licenses

C887VA-K9

Cisco 887 VDSL/ADSL over POTS Multi-mode Router

C887VAM-K9

Cisco 887 VDSL/ADSL Annex M over POTS Multi-mode Router

CISCO887VA-K9

Cisco 887VA router with VDSL2/ADSL2+ over POTS

CISCO887VA-SEC-K9

Cisco 887VA Secure router with VDSL2/ADSL2+ over POTS

CISCO887VA-M-K9

Cisco 887VA Annex M router

C887VA-CUBE-K9

Cisco 887VA router with VDSL2/ADSL2+ over ISDN and integrated CUBE licenses

Multi-mode DSL (VDSL2 and ADSl2/2+) with WLAN

C886VA-W-E-K9

Cisco 886VA router with VDSL2/ADSL2+ over ISDN with 802.11n ETSI Compliant

C887VA-W-A-K9

Cisco 887VA router with VDSL2/ADSL2+ over POTS with 802.11n FCC Compliant

C887VA-W-E-K9

Cisco 887VA router with VDSL2/ADSL2+ over POTS with 802.11n ETSI Compliant

C887VAM-W-E-K9

Cisco 887VA Annex M router with 802.11n ETSI Compliant

Multi-mode DSL (VDSL2 and ADSl2/2+) with Embedded 3G

C886VAG+7-K9

Secure Router with VDSL2/ADSL2+ over ISDN and Embedded 3.7G HSPA+ Release 7 with SMS/GPS

C887VAG-S-K9

Secure Router with VDSL2/ADSL2+ over POTS and Embedded 3G EVDO Rev A with SMS/GPS for Sprint Networks

C887VAG+7-K9

Secure Router with VDSL2/ADSL2+ over POTS and Embedded 3.7G HSPA+ Release 7 with GPS

C887VAMG+7-K9

Secure Router with Raiders VDSL2/ADSL2+ over POTS (Annex M) and Embedded 3.7G HSPA+ Release 7 with GPS

ADSL2/2+

CISCO886-K9

Cisco 886 ADSL2/2+ Annex B Router

CISCO886-SEC-K9

Cisco 886 ADSL2/2+ Annex B Security Router with Advanced IP Services

CISCO886W-GN-E-K9

Cisco 886 ADSL2/2+ Annex B Router with 802.11n ETSI Compliant

CISCO887-K9

Cisco 887 ADSL2/2+ Annex A Router

CISCO887-SEC-K9

Cisco 887 ADSL2/2+ Annex A Security Router with Advanced IP Services

CISCO887W-GN-A-K9

Cisco 887 ADSL2/2+ Annex A Router with 802.11n FCC Compliant

CISCO887W-GN-E-K9

Cisco 887 ADSL2/2+ Annex A Router with 802.11n ETSI Compliant

CISCO887M-K9

Cisco 887 ADSL2/2+ Annex M Router

CISCO887MW-GN-E-K9

Cisco 887 ADSL2/2+ Annex M Router with 802.11n ETSI Compliant

ADSL2/2+ and 3G

CISCO886G-K9

Cisco 886 ADSL2/2+ Annex B Router with 3G

CISCO886GW-GN-E-K9

Cisco 886 ADSL2/2+ Annex B Router with 3G, 802.11n ETSI Compliant

CISCO887G-K9

Cisco 887 ADSL2/2+ Annex A Router with 3G

CISCO887GW-GN-A-K9

Cisco 887 ADSL2/2+ Annex A Router with 3G, 802.11n FCC Compliant

CISCO887GW-GN-E-K9

Cisco 887 ADSL2/2+ Annex A Router with 3G, 802.11n ETSI Compliant

VDSL2

CISCO887V-K9

Cisco 887 VDSL2 over POTS Router

CISCO887V-SEC-K9

Cisco 887 VDSL2 over POTS Security Router with Advanced IP Services

CISCO887VW-GNA-K9

Cisco 887V VDSL2 Router with 802.11n FCC Compliant

CISCO887VW-GNE-K9

Cisco 887V VDSL2 Router with 802.11n ETSI Compliant

VDSL2 and 3G

CISCO887VG-K9

Cisco 887V VDSL2 Router with 3G

CISCO887VGW-GNA-K9

Cisco 887V VDSL2 Router with 3G, 802.11n FCC Compliant

CISCO887VGW-GNE-K9

Cisco 887V VDSL2 Router with 3G, 802.11n ETSI Compliant

G.SHDSL (ATM)

CISCO888-K9

Cisco 888 G.SHDSL Router

C888-CUBE-K9

Cisco 888 G.SHDSL Router with integrated CUBE licenses

CISCO888-SEC-K9

Cisco888 G.SHDSL Security Router with Adv IP Services

CISCO888W-GN-A-K9

Cisco 888 G.SHDSL Router with 802.11n FCC Compliant

CISCO888W-GN-E-K9

Cisco 888 G.SHDSL Router with 802.11n ETSI Compliant

G.SHDSL (EFM)

CISCO888E-K9

Cisco 888E G.SHDSL Router with 802.3ah EFM Support

CISCO888EW-GN-A-K9

Cisco 888E G.SHDSL Router with 802.11n FCC Compliant and 802.3ah EFM Support

CISCO888EW-GN-E-K9

Cisco 888E G.SHDSL Router with 802.11n ETSI Compliant and 802.3ah EFM Support

C888E-CUBE-K9

Cisco 888E G.SHDSL Router with 802.3ah EFM Support and integrated CUBE licenses

Multimode G.SHDSL (EFM/ATM)

C888EA-K9

Cisco Multimode 888EA G.SHDSL (EFM/ATM) Router with 802.3 ah EFM Support

G.SHDSL (ATM) and 3G

CISCO888G-K9

Cisco 888 G.SHDSL Router with 3G

CISCO888GW-G-NA-K9

Cisco 888 G.SHDSL Router with 3G, 802.11n FCC Compliant

CISCO888GW-G-NE-K9

Cisco 888 G.SHDSL Router with 3G, 802.11n ETSI Compliant

G.SHDSL (EFM) and 3G

C888EG+7-K9

Secure Router with Ethernet over G.SHDSL (EFM) and Embedded 3.7G HSPA+ Release 7 with SMS/GPS

Voice Gateway

C887VA-V-K9

Cisco887, V/ADSL2 WAN, 4 FXS, 2BRI, 1ISDN

C887VA-V-W-E-K9

Cisco887, V/ADSL2, 4 FXS, 2BRI, 1ISDN, 2.4GHz

C881-V-K9

Cisco881, FE WAN, 4 FXS, 2BRI, 1FXO

SRST

C881SRST-K9

Cisco 881 SRST Ethernet Security Router with FXS, FXO

C881SRSTW-GN-A-K9

Cisco 881 SRST Ethernet Security Router with FXS, FXO; 802.11n FCC Compliant

C881SRSTW-GN-E-K9

Cisco 881 SRST Ethernet Security Router with FXS, FXO; 802.11n ETSI Compliant

C888SRST-K9

Cisco 888 SRST G.SHDSL Router with FXS, BRI

C888SRSTW-GN-A-K9

Cisco 888 SRST G.SHDSL Router with FXS, BRI; 802.11n FCC Compliant

C888SRSTW-GN-E-K9

Cisco 888 SRST G.SHDSL Router with FXS, BRI; 802.11n ETSI Compliant

Teleworker

C881W-GN-A-K9

Cisco 881 Ethernet Security Router with 802.11n FCC Compliant

C881W-GN-E-K9

Cisco 881 Ethernet Security Router with 802.11n ETSI Compliant

C881W-GN-P-K9

Cisco 881 Ethernet Security Router with 802.11n Japan Compliant

POE

800-IL-PM=2

2 port 802.3af capable inline power module for 880 routers

DRAM

MEM8XX-256U512D

256-MB DRAM upgrade to 512 MB for Cisco 880 Series Routers

MEM8XX-256U768D

512-MB DRAM upgrade to 768 MB for Cisco 880 Series Routers

MEM8XX-512U768D

512-MB DRAM upgrade to 768 MB for Cisco 880 Series Routers

MEM8XX-512U1GB**

512-MB DRAM upgrade to 1GB for Cisco 880 Series Routers

3G Modem

PCEX-3G-CDMA-V

Cisco 3G EVDO Rev A/0/1xRTT Modem-Verizon Networks

PCEX-3G-CDMA-S

Cisco 3G EVDO Rev A/0/1xRTT Modem-Sprint Networks

PCEX-3G-CDMA-B

Cisco 3G EVDO Rev A/0/1xRTT Modem-BSNL Networks

PCEX-3G-HSPA-US

Cisco 3.5G HSPA/UMTS/EDGE/GPRS Modem-AT&T Network Only

PCEX-3G-HSPA-G

Cisco 3.5G HSPA/UMTS/EDGE/GPRS Modem-Global Networks (Global SKU, excluding USA)

Cisco IOS Universal Software for Cisco 880

S880DUDK9*

Cisco 880 Series IOS UNIVERSAL DATA

S880VUDK9*

Cisco 880 Series IOS UNIVERSAL VOICE

Software License for Cisco 880 Data

SL-880-ADSEC (default)

Cisco 880 Advanced Security Image Feature License

SL-880-AIS
(upgrade option)

Cisco 880 Advanced IP Services Image Feature License

SL-880-ADVSEC-NPE

Cisco 880 Advanced Security NPE License PAK (Paper)

SL-880-AIS-NPE
(upgrade option)

Cisco 880 Advanced IP Services NPE License PAK (Paper)

Software License for Cisco 880 Data (Bulk)

L-SL-800-SEC-K9

Advanced IP e-Delivery PAK for Cisco 800 Series

Software License for Cisco 880 SRST and CUBE

SL-SRST880-AIS
(included by default)

Cisco 880 Advanced IP Services Image Feature License

SL-880-AIS and SL-880-ADVSEC
(included by default)

Cisco 880 Advanced IP Services and Security Image Feature License for 3G, Embedded 3G and CUBE models

Security Services

SL-CNFIL-88x-1Y

One year subscription to Content Filtering for Cisco 881/888-URL/Phishing

SL-CNFIL-8xx-TRI

30 day free trial license for 88x series

SSL

FL-WEBVPN-10-K9

Feature License SSL VPN for Up to 10 Users (incremental), for 12.4T based IOS releases only

FL-SSLVPN10-K9

Feature License SSL VPN for Up to 10 Users (incremental), for 15.x based IOS releases only

Router Software

C880data-universalk9-mz

Universal image for Cisco 880 ISR Data Router Series

C880voice-universalk9-mz

Universal image for Cisco 880 SRST and CUBE Router Series

Access Point Software

ap801-k9w7-tar

Autonomous software image for ap801

ap801-rcvk9w8-tar

LWAPP recovery image for ap801

* Each software part number has the Cisco IOS Software release number at the end of the string. For example, the part number of IOS 12.4(20)T data universal image for Cisco 880 series is S880DUK9-12420T.
** This Memory license is only valid for C881-K9, C886VA-K9, C886VAJ-K9, C887VA-K9, and C887VA-M-K9

Cisco License Manager is a secure client- and server-based application used to manage Cisco IOS Software activation and licenses. For more information about Cisco License Manager, visit http://www.cisco.com/go/clm.

Cisco Services for the Branch Office

Services from Cisco and our certified partners can help you reduce the cost and complexity of branch-office deployments. We have the depth and breadth of experience across technologies to architect a blueprint for a branch-office solution to meet your company's needs. Planning and design services align technology with business goals and can increase the accuracy, speed, and efficiency of deployment. Technical services help maintain operational health, strengthen software application functions, solve performance problems, and lower expenses. Optimization services are designed to continually improve performance and help your team succeed with new technologies. For more information, please visit http://www.cisco.com/go/services.