Guest

Cisco IOS 15.0M

Feature Support

  • Viewing Options

  • PDF (432.1 KB)
  • Feedback
Feature Support

Table Of Contents

Feature Support

Determining the Software Images (Feature Sets) That Support a Specific Feature

Determining the Features Supported in a Specific Software Image (Feature Set)

Memory Recommendations

Platform-Specific Information

Cisco 800 Series Routers

Memory Recommendations

Supported Hardware

Feature Support

Cisco 1800 Series Routers (Fixed Configuration and Modular)

Memory Recommendations

Supported Hardware

Feature Support

Cisco 1900 Series Integrated Services Routers

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco 2800 Series Integrated Services Routers

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco 2900 Series Integrated Services Routers

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco 3200 Series Rugged Integrated Services Routers

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco 3800 Series Integrated Services Routers

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco 3900 Series Integrated Services Routers

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco 7000 Series Routers

Memory Recommendations

Supported Hardware

Feature Support

Cisco AS5350XM Universal Gateways

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco AS5400XM Universal Gateways

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco IAD2430 Series Integrated Access Devices

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco IAD2801 Series Integrated Access Devices

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco VG200 Series Analog Voice Gateways

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Cisco VGD 1T3 Voice Gateways

Introduction

Memory Recommendations

Supported Hardware

Feature Support


Feature Support

Cisco IOS software is packaged in feature sets that consist of software images that support specific platforms. The feature sets available for a specific platform depend on which Cisco IOS software images are included in a release. Each feature set contains specific Cisco IOS features.


Caution Cisco IOS images with strong encryption (including, but not limited to 168-bit [3DES] data encryption feature sets) are subject to U.S. government export controls and have limited distribution. Strong encryption images to be installed outside the United States are likely to require an export license. Customer orders may be denied or subject to delay because of U.S. government regulations. When applicable, the purchaser/user must obtain local import and use authorizations for all encryption strengths. Please contact your sales representative or distributor for more information, or send an e-mail to export@cisco.com.

Feature-to-image mapping is available through Cisco Feature Navigator. Cisco Feature Navigator is a web-based tool that enables you to determine which Cisco IOS software images support a specific set of features and which features are supported in a specific Cisco IOS image. You can search by feature or by feature set (software image). You can compare Cisco IOS software releases side-by-side to display both the features unique to each software release and the features that the releases have in common.

Cisco Feature Navigator is updated regularly when major Cisco IOS software releases and technology releases occur. For the most current information, go to the Cisco Feature Navigator home page at the following URL:

www.cisco.com/go/cfn

For help with Cisco Feature Navigator, see the help information at the following URL:

http://www.cisco.com/web/applicat/CFNTOOLS/Help_Docs/help/cfn_support.html

Determining the Software Images (Feature Sets) That Support a Specific Feature

To determine which software images (feature sets) in a Cisco IOS release support a specific feature, go to the Cisco Feature Navigator home page and perform the following steps.


Step 1 From the Cisco Feature Navigator home page, click Research Features.

Step 2 Select your software type or leave the field as "All".

Step 3 To find a feature, you can search by either Feature or Technology (select the appropriate button). If you select Search by Feature, you can further filter your search by using the Filter By text box.

Step 4 Choose a feature from the Available Features text box, and click the Add button to add the feature to the Selected Features text box.


Note To learn more about a feature in the list, click the View Desc button in the Available Features text box.


Repeat this step to add features. A maximum of 20 features can be chosen for a single search.

Step 5 Click Continue when you are finished choosing features.

Step 6 In the Release/Platform Tree area, select either your release (from the Train-Release list) or your platform (from the Platform list).

Step 7 The "Search Result" table will list all the software images (feature sets) that support the features that you chose.


Note You can download your results into an Excel spreadsheet by clicking on the Download Excel button.



Determining the Features Supported in a Specific Software Image (Feature Set)

To determine which features are supported in a specific software image (feature set), go to the Cisco Feature Navigator home page and perform the following steps.


Step 1 From the Cisco Feature Navigator home page, click Research Software.

Step 2 Select your software type from the drop-down list and chose the Release button in the "Search By" area.

Step 3 From the Major Release drop-down list, chose the appropriate major release.

Step 4 From the Release drop-down list, choose the appropriate maintenance release.

Step 5 From the Platform drop-down list, choose the appropriate hardware platform.

Step 6 From the Feature Set drop-down list, choose the appropriate feature set. The Image Details area will provide details on the specific image. The Available Features area will list all the features that are supported by the feature set (software image) that you chose.


Note To learn more about a feature in the list, click the View Desc button in the Available Features text box.



Memory Recommendations

To determine memory recommendations for software images (feature sets) in your Cisco IOS release, go to the Cisco Feature Navigator home page and perform the following steps.


Step 1 From the Cisco Feature Navigator home page, click Research Software.

Step 2 Select your software type from the drop-down list and choose the Release button in the "Search By" area.

Step 3 From the Major Release drop-down list, choose the appropriate major release.

Step 4 From the Release drop-down list, choose the appropriate maintenance release.

Step 5 From the Platform drop-down list, choose the appropriate hardware platform.

Step 6 From the Feature Set drop-down list, choose the appropriate feature set.

Step 7 The Image Details area will provide details on the specific image including the DRAM and flash memory recommendations for each image. The Available Features area will list all the features that are supported by the feature set (software image) that you chose.


Platform-Specific Information

This section describes the platform-specific information for the Cisco platforms supported by Cisco IOS Release 15.0M. Each section includes memory requirements and supported features. Additional information is provided when applicable.

This information is provided for the platforms described in the following sections:

Cisco 800 Series Routers

Cisco 1800 Series Routers (Fixed Configuration and Modular)

Cisco 1900 Series Integrated Services Routers

Cisco 2800 Series Integrated Services Routers

Cisco 2900 Series Integrated Services Routers

Cisco 3200 Series Rugged Integrated Services Routers

Cisco 3800 Series Integrated Services Routers

Cisco 3900 Series Integrated Services Routers

Cisco 7000 Series Routers

Cisco AS5350XM Universal Gateways

Cisco AS5400XM Universal Gateways

Cisco IAD2430 Series Integrated Access Devices

Cisco IAD2801 Series Integrated Access Devices

Cisco VG200 Series Analog Voice Gateways

Cisco VGD 1T3 Voice Gateways

Cisco 800 Series Routers

This section contains the following sections with information that is specific to the Cisco 800 series routers:

Memory Recommendations

Supported Hardware

Feature Support

Memory Recommendations

For memory recommendations for the Cisco 800 series routers in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the following Cisco 800 series routers:

Cisco 861

Cisco 870 (Cisco 871, Cisco 876, Cisco 877, Cisco 878)

Cisco 881 (Cisco 881, Cisco IAD881, Cisco SRST881)

Cisco 886 (Cisco IAD886, Cisco SRST886)

Cisco 887 (Cisco 887, Cisco IAD887, Cisco SRST887)

Cisco 888 (Cisco 888, Cisco IAD888, Cisco SRST888)

Cisco 891

Cisco 892

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco 1800 Series Routers (Fixed Configuration and Modular)

This section contains the following sections with information that is specific to the Cisco 1800 series routers:

Memory Recommendations

Supported Hardware

Feature Support

Memory Recommendations

For memory recommendations for the Cisco 1800 series routers in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the following Cisco 1800 series routers:

Cisco 1801, Cisco 1802, Cisco 1803, and Cisco 1805, wireless and nonwireless

Cisco 1811 and Cisco 1812, wireless (fixed configuration)

Cisco 1811 and Cisco 1812, without wireless (fixed configuration)

Cisco 1841 (modular)

Cisco 1841C (The Cisco 1841C router is supported in Cisco IOS Release 15.0(1)M2 and later releases.)

Cisco 1861 (integrated services)

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Cisco 1801 Routers

The Cisco 1801 router has the following hardware components:

One Fast Ethernet port

One ADSL over POTS port

One ISDN-BRI S/T port

Eight Fast Ethernet Switch ports

Cisco 1801W Routers

The Cisco 1801W router has the following hardware components:

One Fast Ethernet port

One ADSL over POTS port

One ISDN-BRI S/T port

Eight Fast Ethernet Switch ports

IEEE 802.11a and 802.11b/g wireless

Cisco 1802 Routers

The Cisco 1802 router has the following hardware components:

One Fast Ethernet port

One ADSL over ISDN port

One ISDN-BRI S/T port

Eight Fast Ethernet Switch ports

Cisco 1802W Routers

The Cisco 1802W router has the following hardware components:

One Fast Ethernet port

One ADSL over ISDN port

One ISDN-BRI S/T port

Eight Fast Ethernet Switch ports

IEEE 802.11a and 802.11b/g wireless

Cisco 1803 Routers

The Cisco 1803 router has the following hardware components:

One Fast Ethernet port

One G.SHDSL port

One ISDN-BRI S/T port

Eight Fast Ethernet Switch ports

Cisco 1803W Routers

The Cisco 1803W router has the following hardware components:

One Fast Ethernet port

One G.SHDSL port

One ISDN-BRI S/T port

Eight Fast Ethernet Switch ports

IEEE 802.11a and 802.11b/g wireless

Cisco 1805 Routers

The Cisco 1805 router has the following hardware components:

Two onboard Fast Ethernet ports

Four-port 10/100BASE-T managed switches

Onboard hardware encryption

Auxiliary port

Cisco 1811 Routers

The Cisco 1811 router has the following hardware components:

Two Fast Ethernet ports

One V.92 modem port

Eight Fast Ethernet switch ports

Two Universal Serial Bus (USB) connectors

Cisco 1812 Routers

The Cisco 1812 router has the following hardware components:

Two Fast Ethernet ports

One ISDN-BRI S/T port

Eight Fast Ethernet switch ports

Two USB connectors

Cisco 1841 router

The Cisco 1841 router supports any combination of one or two of the following WAN interface cards (WICs) or multiflex voice/WAN interface cards (VWICs) (data only), which are shared with the Cisco 1700, Cisco 2600, and Cisco 3600 series routers:

WIC-1T: one-port high-speed serial (synchronous/asynchronous)

WIC-2T: two-port high-speed serial (synchronous/asynchronous)

WIC-2A/S: two-port low-speed serial (synchronous/asynchronous) (up to 128 kb/s)

WIC-1ADSL: one-port ADSL

WIC-1ADSL-I-DG: one-port ADSLoISDN WIC

WIC-1ADSL-DG: one-port ADSLoPOTS WIC with dying gasp

WIC-1B-S/T-V3: one-port ISDN WIC (dial and leased line)

WIC-1B-U-V2: one-port ISDN BRI NT-1 WIC for the Cisco 1700, 1800, 2600, 3600, and 3700 series

WIC-1DSU-56K4: one-port integrated 56/64-kb/s 4-wire DSU/CSU

WIC-1DSU-T1-V2: updated one-port T1/fractional T1 DSU/CSU WIC

WIC-1SHDSL: one-port G.SHDSL

WIC-1SHDSL-V2

WIC-1AM: one-port analog modem

WIC-2AM: two-port analog modem

HWIC-4A/S: four low-speed sync/async serial ports

HWIC-4ESW: four-port 10/100 Ethernet switch interface cards

HWIC-8A/S-RS232: eight low-speed sync/async serial ports, EIA-232 only

HWIC-8A: eight async EIA-232 serial ports

HWIC-AP-G

HWIC-AP-AG

The following T1/E1 multiflex VWICs are also supported on the Cisco 1841 for data applications only:

VWIC-1MFT-E1: one-port RJ-48 multiflex trunk (E1)

VWIC-2MFT-E1: two-port RJ-48 multiflex trunk (E1)

VWIC-1MFT-G703: one-port RJ-48 multiflex trunk (G.703)

VWIC-2MFT-G703: two-port RJ-48 multiflex trunk (G.703)

VWIC-1MFT-T1: one-port RJ-48 multiflex trunk (T1)

VWIC-2MFT-T1: two-port RJ-48 multiflex trunk (T1)

VWIC-2MFT-E1-DI: two-port RJ-48 multiflex trunk (E1) (with drop and insert)

VWIC-2MFT-T1-DI: two-port RJ-48 multiflex trunk (T1) (with drop and insert)

VWIC2-1MFT-T1/E1: 1-port T1/E1 voice/WAN with drop and insert (D&I)

VWIC2-2MFT-T1/E1: 2-port T1/E1 voice/WAN with drop and insert (D&I)

VWIC2-1MFT-G703: 1-port T1/E1 voice/WAN with drop and insert (D&I) and unstructured E1 (G703)

VWIC2-2MFT-G703: 2-port T1/E1 voice/WAN with drop and insert (D&I) and unstructured E1 (G703)

AIM:

AIM-VPN/BPII-PLUS: DES/3DES/AES VPN Encryption/Compression card

AIM-VPN/SSL-1: Encryption module support

USB flash:

MEMUSB-64FT

MEMUSB-128FT

MEMUSB-256FT

Cisco 1841C Routers

The Cisco 1841C router supports only the following modules:

AIM-VPN/SSL-1: Encryption module support

HWIC-1ADSL: 1 ADSL port

HWIC-1FE: 1-port 10/100 routed-port HWIC

HWIC-2FE: 2-port 10/100 routed-port HWIC

HWIC-1GE-SFP: 1-SFP slot GigE HWIC

HWIC-16A: 16-port async HWIC

HWIC-1T-C: 1-port serial high-speed WIC

HWIC-2T-C: 2-port serial high-speed WIC

HWIC-4T: 4-port serial HWIC

HWIC-2A/S: 2-port async/sync serial high-speed WIC

HWIC-4A/S: 4-port async/sync serial HWIC

HWIC-8A: 8-port async HWIC

HWIC-8A/S-232: 8-port async/sync serial HWIC, EIA-232

HWIC-3G-HSPA: 3G WWAN HWIC-HSPA/UMTS/EDGE/GPRS

HWIC-4ESW-C: 4-port single-wide 10/100BASET Ethernet switch HWIC

VWIC2-1MFT-G703-C: 1-port T1/E1 voice/WAN with drop and insert (D&I) and unstructured E1 (G703)

VWIC2-2MFT-G703-C: 2-port T1/E1 voice/WAN with drop and insert (D&I) and unstructured E1 (G703)

WIC-1AM-V2: 1-port analog modem WIC

WIC-2AM-V2: 2-port analog modem WIC

Cisco 1861 Routers

The Cisco 1861 router has the following software components:

Cisco Unified Communications Manager Express (Cisco Unified CME)

Cisco Unity Express

Security

Cisco IOS Firewall

Cisco Secure VPN

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco 1900 Series Integrated Services Routers

This section contains the following sections with information that is specific to the Cisco 1900 series integrated services routers:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

The Cisco 1900 series integrated services routers platforms are future-enabled with multicore CPUs, Gigabit Ethernet switching with enhanced POE, and new energy monitoring and control capabilities while enhancing overall system performance. Additionally, a new Cisco IOS Software Universal image and Services Ready Engine module enables you to decouple the deployment of hardware and software, providing a stable technology foundation that can quickly adapt to evolving network requirements. The Cisco 1900 series integrated services routers offer embedded hardware encryption acceleration, optional firewall, intrusion prevention, and application services. In addition, the platforms support the industry's widest range of wired and wireless connectivity options such as T1/E1, xDSL, 3G, and GE. The Cisco 1941W offers integration of IEEE 802.11n access point that is backward-compatible with IEEE 802.11a/b/g access points.

Memory Recommendations

For memory recommendations for the Cisco 1941 integrated services routers in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the following Cisco 1900 series integrated services routers:

Cisco 1941

Cisco 1941W

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

For supported modules on the Cisco 1900 series integrated service routers, see the following document:

http://www.cisco.com/en/US/products/ps10538/products_relevant_interfaces_and_modules.html

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco 2800 Series Integrated Services Routers

This section contains the following sections with information that is specific to the Cisco 2800 series integrated services routers:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

Cisco IOS Release 15.0M supports the Cisco 2800 series integrated services routers.

The Cisco 2800 series integrated services routers comprise the Cisco 2801, Cisco 2811, Cisco 2821, and Cisco 2851 routers. These routers differ as follows:

Cisco 2801 routers support two HWIC/WIC/VIC/VWIC slots capable of supporting double-wide HWICs, one WIC/VWIC/VIC slot, one VWIC/VIC (voice only) slot, two Advanced Integration Modules (AIMs), two packet voice data modules (PVDMs), two Fast Ethernet connections, and 16 ports of IP phone power output.

Cisco 2811 routers support one single network module enhanced (NME), four single or two double high-speed WAN interface cards (HWICs), two AIMs, two PVDMs, two Fast Ethernet connections, and 24 ports of IP phone power output.

In Cisco 2821 routers, the network module slot adds support for a single network module enhanced extended (NME-X), and an additional slot supports an extension voice module (EVM). Three PVDMs are supported, the LAN ports support two Gigabit Ethernet ports, and 36 ports of IP phone power output are available.

In Cisco 2851 routers, the network module slot adds support for network module double-wide (NMD) and network module enhanced extended double-wide (NME-XD), and the IP phone power output is increased to 48 ports.

A high density extension module (HDEM) operates in the EVM slot on the Cisco 2821 and Cisco 2851 routers. The EVM slot supports additional voice services and density without consuming the network module slot on those routers.

Memory Recommendations

For memory recommendations for the Cisco 2800 series integrated services routers in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.


Note The minimum DRAM to run c2801-adventerprisek9-mz in Cisco IOS Release 15.0M is 192 MB.


Supported Hardware

Cisco IOS Release 15.0M supports the following Cisco 2800 series integrated services routers:

Cisco 2801

Cisco 2801C (The Cisco 2801C router is supported in Cisco IOS Release 15.0(1)M2 and later releases.)

Cisco 2811

Cisco 2811C (The Cisco 2811C router is supported in Cisco IOS Release 15.0(1)M2 and later releases.)

Cisco 2821

Cisco 2821C (The Cisco 2821C router is supported in Cisco IOS Release 15.0(1)M2 and later releases.)

Cisco 2851

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Table 1 lists the supported interfaces for the Cisco 2800 series routers for Cisco IOS Release 15.0M.

Table 1 Supported Modules and Interface Cards for the Cisco 2800 Series Integrated Services Routers 

Network Module
Product Description
Supported Platforms
Ethernet Switching Network Modules

NM-16ESW

16-port 10/100 Cisco EtherSwitch network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-16ESW-C

16-port 10/100 Cisco EtherSwitch network module

Cisco 2801C, Cisco 2811C, Cisco 2821C

NM-16ESW-1GIG

16-port 10/100 Cisco EtherSwitch network module with 1 Gigabit Ethernet (1000BASE-T) port

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-16ESW-1GIG-C

16-port 10/100 Cisco EtherSwitch network module with 1 Gigabit Ethernet (1000BASE-T) port

Cisco 2801C, Cisco 2811C, Cisco 2821C

NM-16ESW-PWR

16-port 10/100 Cisco EtherSwitch network module with in-line power support

Cisco 2811, Cisco 2821,
Cisco 2851

NM-16ESW-PWR-1GIG

16-port 10/100 Cisco EtherSwitch network module with in-line power and Gigabit Ethernet

Cisco 2811, Cisco 2821
Cisco 2851

NMD-36ESW

36-port 10/100 Cisco EtherSwitch high-density services module (HDSM)

Cisco 2851

NMD-36ESW-2GIG

36-port 10/100 Cisco EtherSwitch HDSM with 1 Gigabit Ethernet (1000BASE-T) port

Cisco 2851

NMD-36ESW-PWR

36-port 10/100 Cisco EtherSwitch HDSM with in-line power support

Cisco 2851

NMD-36ESW-PWR-2G

36-port 10/100 Cisco EtherSwitch HDSM with in-line power and Gigabit Ethernet

Cisco 2851

NME-16ES-1G-P

One 16-port 10/100 Cisco EtherSwitch service module with 802.3af, 1 10/100/1000 port, and IP base

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C, Cisco 2851

NME-X-23ES-1G-P

One 23-port 10/100 Cisco EtherSwitch service module with 802.3af, 1 10/100/1000 port w/ 802.3af, and IP base

Cisco 2821, Cisco 2821C, Cisco 2851

NME-XD-24ES-1S-P

One 24-port 10/100 Cisco EtherSwitch service module with 802.3af, 1 SFP, Cisco StackWise connectors, and IP base

Cisco 2851

NME-XD-48ES-2S-P

One 48-port 10/100 Cisco EtherSwitch service module with 802.3af, 2 SFPs, and IP base

Cisco 2851

Serial Connectivity Network Modules

NM-1T3/E3

1-port clear-channel T3/E3 network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-1HSSI

1-port HSSI network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-4A/S

4-port asynch/synch serial network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-8A/S

8-port asynch/synch serial network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-16A/S

16-port asynch/synch serial network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-16A

16-port asynch serial network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-32A

32-port asynch serial network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

Channelized T1/E1 and ISDN Network Modules

NM-1CE1T1-PRI

1-port Channelized E1/T1/ISDN PRI network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-2CE1T1-PRI

2-port Channelized E1/T1/ISDN PRI network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-4B-S/T

4-port ISDN BRI network module (S/T interface)

Cisco 2811, Cisco 2821,
Cisco 2851

NM-4B-U

4-port ISDN BRI network module with integrated Network Termination 1 (NT1) (U interface)

Cisco 2811, Cisco 2821,
Cisco 2851

NM-8B-S/T

8-port ISDN BRI network module (S/T interface)

Cisco 2811, Cisco 2821,
Cisco 2851

NM-8B-U

8-port ISDN BRI network module with integrated NT1
(U interface)

Cisco 2811, Cisco 2821,
Cisco 2851

ATM Network Modules

NM-1A-T3

1-port DS-3 ATM network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-1A-E3

1-port E# ATM network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

Analog Dialup and Remote Access Network Modules

NM-8AM-V2

8-port analog modem network module with v.92

Cisco 2811, Cisco 2821,
Cisco 2851

NM-16AM-V2

16-port analog modem network module with v.92

Cisco 2811, Cisco 2821,
Cisco 2851

Voice Network Modules and Accessories

NM-HD-1V

1-slot IP communications voice and fax network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-HD-2V

2-slot IP communications enhanced voice and fax network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-HD-2VE

2-slot IP communications enhanced voice and fax network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-HDA-4FXS

High-density analog voice and fax network module with 4 FXS slots

Cisco 2811, Cisco 2821,
Cisco 2851

NM-HDV2

IP communications high-density voice and fax network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-HDV2-1T1/E1

1-port T1/E1 IP communications high-density voice and fax network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-HDV2-2T1/E1

2-port T1/E1 IP communications high-density voice and fax network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-HDV=

High-density voice/fax network module (single VIC slot)

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-1T1-12

1-port 12-channel T1 voice and fax network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-1T1-24

1-port 24-channel T1 voice and fax network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-1T1-24E

Single-port 24-enhanced-channel T1 voice and fax network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-2T1-48

2-port 48-channel T1 voice and fax network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-1E1-12

1-port 12-channel E1 voice and fax network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-1E1-30

1-port 30-channel E1 voice and fax network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-1E1-30E

1-port 30-enhanced-channel E1 voice and fax network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-2E1-60

2-port 60-channel E1 voice and fax network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-1J1-30

1-port 30-channel J1 high-density voice network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-1J1-30E

1-port 30-enhanced-channel J1 high-density voice network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-FARM-C36

36-port transcoding and conferencing DSP farm

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-FARM-C54

54-port transcoding and conferencing DSP farm

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

NM-HDV-FARM-C90

90-port transcoding and conferencing DSP farm

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

Application Network Modules

NM-CE-BP-40G-K9

Cisco content engine network module basic performance, 40-GB IDE hard disk

Cisco 2811, Cisco 2821,
Cisco 2851

NM-CE-BP-80G-K9

Cisco content engine network module basic performance, 80-GB IDE hard disk

Cisco 2811, Cisco 2821,
Cisco 2851

NM-CE-BP-SCSI-K9

Cisco content engine network module basic performance, Small Computer System Interface (SCSI) controller

Cisco 2811, Cisco 2821,
Cisco 2851

NM-CIDS-K9

Cisco IDS network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-CUE

Cisco Unity Express voice-mail network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-NAM

Cisco 2600, 3660, 3700 series network analysis module

Cisco 2811, Cisco 2821,
Cisco 2851

Alarm Monitoring and Control Network Modules and Accessories

NM-AIC-64

Alarm monitoring and control network module

Cisco 2811, Cisco 2821,
Cisco 2851

Circuit Emulation over IP (CEoIP) Network Modules

NM-CEM-4SER

4-port serial CEoIP network module

Cisco 2811, Cisco 2821,
Cisco 2851

NM-CEM-T4E1

4-port T1/E1 CEoIP network module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

Extension Voice Module

EVM-HD-8FXS/DID

High-density voice/fax extension module-8FXS/DID

Cisco 2821, Cisco 2851

Interface-Card Support
Product Description
Supported Platforms
Access Point HWIC

HWIC-AP-AG

Supports IEEE 802.11a/b/g and has two radios for simultaneous operation in the 2.4 GHz and 5 GHz bands supporting up to 108 Mbps speeds

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

HWIC-AP-G

Supports IEEE 802.11b/g and has a single radio that operates in the 2.4 GHz band supporting up to 54 Mbps speeds

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

DSL HWIC

HWIC-1ADSL

1 ADSL port

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

Ethernet Switching HWICs

HWIC-4ESW

4-port single-wide 10/100BASE-T Ethernet switch HWIC

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

HWIC-4ESW-C

4-port single-wide 10/100BASE-T Ethernet switch HWIC

Cisco 2801C, Cisco 2811C, Cisco 2821C

HWIC-D-9ESW

9-port double-wide 10/100BASE-T Ethernet switch HWIC

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

HWIC-D-9ESW-C

9-port double-wide 10/100BASE-T Ethernet switch HWIC

Cisco 2801C, Cisco 2811C, Cisco 2821C

HWIC-4ESW-POE

4-port Ethernet switch HWIC, power over Ethernet capable

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

HWIC-D-9-ESW-POE

9-port Ethernet switch HWIC, power over Ethernet capable

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

Gigabit Ethernet HWICs

HWIC-1GE-SFP

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C,
Cisco 2851

Serial WICs and HWICs

WIC-1T

1-port high-speed serial WIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

WIC-2T

2-port high-speed serial WIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

WIC-2A/S

2-port asynchronous/synchronous serial WIC

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

HWIC-1T-C

1 high-speed serial port

Cisco 2801C, Cisco 2811C, Cisco 2821C

HWIC-2T-C

2 high-speed serial ports

Cisco 2801C, Cisco 2811C, Cisco 2821C

HWIC-4T

4 high-speed serial ports

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

HWIC-4T1/E1

4 high-speed T1/E1 serial ports

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

HWIC-4A/S

4 low-speed synchronous/asynchronous serial ports

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

HWIC-8A/S-232

8 low-speed synchronous/async serial ports, EIA-232 only

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

HWIC-8A

8 async EIA-232 serial ports

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

HWIC-16A

16 async EIA-232 serial ports

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

CSU/DSU WICs

WIC-1DSU-T1-V2

1-port T1/Fractional-T1 DSU/CSU WIC

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

WIC-1DSU-56K4

1-port 4-wire 56-/64-kb/s DSU/CSU WIC

Cisco 2801, Cisco 2801C, Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

ISDN BRI WICs

WIC-1B-U-V2

1-port ISDN BRI with integrated NT1 (U interface)

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

WIC-1B-S/T-V3

1-port ISDN BRI with S/T interface

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

DSL WAN Interface Cards

WIC-1ADSL

1-port asymmetric DSL (ADSL) over POTS service WIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

WIC-1ADSL-DG

1-port ADSL over basic telephone service with dying gasp WIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

WIC-1ADSL-1-DG

1-port ADSL over ISDN with dying gasp WIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

WIC-1SHDSL

1-port G.SHDSL WIC (2-wire only)

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

WIC-1SHDSL-V2

1-port G.SHDSL WIC (2- or 4-wire)

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

Analog Modem WICs

WIC-1AM

1-port analog modem WIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

WIC-2AM

2-port analog modem WIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

WIC-1AM-V2

1-port analog modem WIC

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

WIC-2AM-V2

2-port analog modem WIC

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

T1, E1, and G.703 Multiflex Trunk Voice Cards and WICs

VWIC-1MFT-T1

1-port RJ-48 multiflex trunk-T1

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC-2MFT-T1

2-port RJ-48 multiflex trunk-T1

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC-2MFT-T1-DI

2-port RJ-48 multiflex trunk-T1with drop and insert

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC-1MFT-E1

1-port RJ-48 multiflex trunk-E1

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC-1MFT-G703

1-port RJ-48 multiflex trunk-G.703

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC-2MFT-E1

2-port RJ-48 multiflex trunk-E1

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC-2MFT-E1-DI

2-port RJ-48 multiflex trunk-E1 with drop and insert

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC-2MFT-G703

2-port RJ-48 multiflex trunk-G.703

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC2-1MFT-T1/E1

1-port T1/E1 multiflex trunk VWIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC2-2MFT-T1/E1

2-port T1/E1 multiflex trunk VWIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC2-1MFT-G703

1-port G.703 multiflex trunk VWIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC2-1MFT-G703-C

1-port G.703-C multiflex trunk VWIC

Cisco 2801C, Cisco 2811C, Cisco 2821C

VWIC2-2MFT-G703

2-port G.703 multiflex trunk VWIC

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VWIC-2MFT-G703-C

2-port G.703-C multiflex trunk VWIC

Cisco 2801C, Cisco 2811C, Cisco 2821C

EC-MFT-32

32-channel multiflex trunk dedicated echo cancellation module (ECAN modules)

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

EC-MFT-64

64-channel multiflex trunk dedicated echo cancellation module (ECAN modules)

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VICs

VIC-1J1

1-port digital VIC 1J1 for Japan

Cisco 2811, Cisco 2821,
Cisco 2851

VIC-2DID

2-port DID voice and fax interface card

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VIC-4FXS/DID

4-port FXS or DID VIC

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

VIC2-2FXS

2-port VIC-FXS

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VIC3-2E/M

2-port E&M voice and fax interface card

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

VIC3-2FXS/DID

2-port FXS and DID voice and fax interface card

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

VIC3-2FXS-E/DID

2-port FXS enhanced and DID voice and fax interface card

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

VIC3-4FXS/DID

4-port FXSand DID voice and fax interface card

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

Interface-Card Support

VIC2-2FXO

2-port VIC-FXO (universal)

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

VIC2-4FXO

4-port VIC-FXO (universal)

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

VIC2-2E/M

2-port VIC-E&M

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

VIC2-2BRI-NT/TE

2-port VIC card-BRI (NT and TE)

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

Advanced Integration Modules

AIM-ATM

High-performance ATM SAR AIM

Cisco 2811, Cisco 2821,
Cisco 2851

AIM-COMPR2-V2

Data compression AIM

Cisco 2811, Cisco 2821,
Cisco 2851

AIM-CUE

Cisco Unity Express voice-mail AIM

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

AIM-VPN/EPII-PLUS

Enhanced-performance DES, 3DES, AES, and compression VPN encryption AIM

Cisco 2801, Cisco 2811,
Cisco 2821, Cisco 2851

AIM-VPN/SSL-2

Encryption module support

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

DigitaL Modem Network Modules

PVDM2-12DM

12-port digital modem module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C, Cisco 2851

PVDM2-24DM

24-port digital modem module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C, Cisco 2851

PVDM2-36DM

36-port digital modem module

Cisco 2811, Cisco 2811C, Cisco 2821, Cisco 2821C, Cisco 2851

DSP (PVDM) Support on Motherboard Slots

PVDM2-8

8-channel fax and voice DSP module

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

PVDM2-16

16-channel fax and voice DSP module

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

PVDM2-32

32-channel fax and voice DSP module

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

PVDM2-48

48-channel fax and voice DSP module

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

PVDM2-64

64-channel fax and voice DSP module

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851

USB Memory Options

MEMUSB-64FT

64 MB USB flash token

Cisco 1800, Cisco 2800, Cisco 3800 series platforms

MEMUSB-128FT

128 MB USB flash token

Cisco 1800, Cisco 2800, Cisco 3800 series platforms

MEMUSB-256FT

256 MB USB flash token

Cisco 1800, Cisco 2800, Cisco 3800 series platforms

Wireless WAN HWIC

HWIC-3G-HSPA

Wireless 3G HSPA WAN

Cisco 2801, Cisco 2801C,
Cisco 2811, Cisco 2811C,
Cisco 2821, Cisco 2821C,
Cisco 2851


Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco 2900 Series Integrated Services Routers

This section contains the following sections with information that is specific to the Cisco 2900 series integrated services routers:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

The Cisco 2900 series integrated services routers are future-enabled with multicore CPUs, and support for high-capacity digital signal processors (DSPs) with a video-ready media engine, in addition to a rich set of audio features, future-enhanced video capabilities, high-powered service modules with improved availability, Gigabit Ethernet switching with enhanced POE, and new energy monitoring and control capabilities while enhancing overall system performance. Additionally, a new Cisco IOS Software Universal image and Services Ready Engine module enable you to decouple the deployment of hardware and software, providing a flexible technology foundation that can quickly adapt to evolving network requirements.

Memory Recommendations

For memory recommendations for the Cisco 2900 series integrated services routers in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the following Cisco 2900 series integrated services routers:

Cisco 2901

Cisco 2911

Cisco 2921

Cisco 2951

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

For supported modules on the Cisco 2900 series integrated services routers, see the following document:

http://www.cisco.com/en/US/products/ps10537/products_relevant_interfaces_and_modules.html

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco 3200 Series Rugged Integrated Services Routers

This section contains the following sections with information that is specific to the Cisco 3200 series rugged integrated services routers (ISR):

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

The Cisco 3200 series rugged integrated services routers (formerly named the Cisco 3200 series of wireless and mobile access routers) offer secure data, voice, and video communications across a wide range of different wireless and wired networks. These routers deliver always-on IP connectivity for networks in motion. They support Cisco IOS mobile networks and enable these networks to hide IP roaming from local IP nodes. This, in turn, enables IP hosts on a mobile network to connect transparently to the parent network while a router is in motion. The Cisco 3200 series rugged ISRs are highly ruggedized, can be installed in harsh environments with the proper enclosure, and are intended to be mounted in a vehicle.

For detailed information about the Cisco 3200 series routers, see the documents at the following location:

http://www.cisco.com/univercd/cc/td/doc/product/access/mar_3200/index.htm

Memory Recommendations

For memory recommendations for the Cisco 3200 series integrated services routers in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the following Cisco 3200 series ISRs:

Cisco 3220 is a preconfigured model designed for volume deployments in public safety and transportation with one WMIC as an optional bundle.

Cisco 3250 is a fully configurable model designed for defense customers and command and control vehicles with interface card combinations that allow for more numerous serial or FE port combinations.

Cisco 3270 is designed to provide wired and wireless network connectivity in harsh environments, such as police cars, military vehicles, trains, airborne vehicles, and outdoor locations that are exposed to the elements.

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

The following Cisco cards are supported on the Cisco 3200 series ISRs:

The Mobile Access Router Card (MARC), which includes the host processor, memory, one 10/100 Fast Ethernet port, one console port, and one auxiliary port.

The Serial Mobile Interface Card (SMIC), which supports either two or four synchronous/asynchronous serial ports.

The Fast Ethernet Switch Mobile Interface Card (FESMIC), which supports either two or four autosensing switched ports and LEDs.

The 2.4-GHz Wireless Mobile Interface Card (WMIC), which provides one autosensing 10/100 Fast Ethernet port, an 802.11b/g radio, and connectors for tricolor LEDs.

The 4.9-GHz Wireless Mobile Interface Card (WMIC), which provides one autosensing 10/100 Fast Ethernet port, a 4.9-GHz radio, and connectors for tricolor LEDs

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco 3800 Series Integrated Services Routers

This section contains the following sections with information that is specific to the Cisco 3800 series integrated services routers:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

Cisco 3800 series integrated services routers are part of a generation of routers that incorporate high-performance integrated data, voice, video, and Virtual Private Network (VPN) capability. They are designed for branch office installations that need integrated low-density switching, security, voice, IP telephony, video, content networking, and concurrent applications.

The Cisco 3825 router and the Cisco 3845 router have the following features:

Two built-in 1000BASE-T Gigabit Ethernet ports with RJ-45 connectors for shielded twisted pair. One of these ports provides a slot for an optional small-form-factor pluggable (SFP) module.

Hardware-based VPN encryption acceleration.

Modular design that enables you to add a wide variety of LAN and WAN ports with interchangeable network modules and interface cards.

The Cisco 3825 router provides two slots for network modules. The lower network module slot of this router can hold a single-wide or extended single-wide network module. The upper slot of the Cisco 3825 router can hold a single-wide, extended single-wide, double-wide, or extended double-wide network module.

The Cisco 3845 router provides four slots for network modules. Each slot can hold a single-wide or extended single-wide network module. Slots can be combined in pairs to hold a double-wide or extended double-wide network module.

The Cisco 3825 router and the Cisco 3845 router each provide four interface card slots. Each slot can hold a single-wide WAN interface card (WIC), voice interface card (VIC), voice/data T1/E1 WAN interface card (VWIC), or high-speed WAN interface card (HWIC). Slots can be combined in pairs to hold a double-wide HWIC.

Advanced integration modules (AIMs) and packet voice data modules (PVDMs) install into connectors on the router motherboard. AIMs provide hardware-based support for additional features. PVDMs are digital signal processor (DSP) SIMMs that provide voice support. The Cisco 3825 router and the Cisco 3845 router can each accommodate two AIMs and four PVDMs.

For detailed information about the Cisco 3800 series of routers, see the documents at the following location:

http://www.cisco.com/en/US/products/ps5855/tsd_products_support_series_home.html

Memory Recommendations

For memory recommendations for the Cisco 3800 series integrated services routers in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the following Cisco 3800 series integrated services routers:

Cisco 3825

Cisco 3825C (The Cisco 3825C router is supported in Cisco IOS Release 15.0(1)M3 and later releases.)

Cisco 3825-NOVPN

Cisco 3845

Cisco 3845C (The Cisco 3845C router is supported in Cisco IOS Release 15.0(1)M3 and later releases.)

Cisco 3845-NOVPN

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Table 2 summarizes typical WAN, LAN, and voice connections for the Cisco 3800 series routers for Cisco IOS Release 15.0M.

Table 2 WAN, LAN, and Voice Connections for the Cisco 3800 Series Integrated Services Routers 

Port or Connection
Port Type
Connected To

Ethernet

RJ-45

Ethernet switch

T1/E1 WAN
xCE1T1-PRI

RJ-48C
RJ-48S

T1 or E1 network
External T1 CSU or other T1 equipment

T3/DS3/E3 WAN

BNC connector

T3 network, CSU/DSU, or other T3/DS3 equipment

Cisco serial

60-pin D-sub

CSU/DSU and serial network or equipment

Cisco Smart serial

Cisco Smart compact connector

CSU/DSU and serial network or equipment

ADSL

RJ-11C/CA11A

Network demarcation device for the service provider's DSL interface

SHDSL

RJ-11C/CA11A
RJ-14

Network demarcation device for the service provider's DSL interface

T1/E1 digital voice

RJ-48C/CA81A

Digital PBX, ISDN network, CSU/DSU

Analog voice FXS

RJ-11

Telephone, fax

Analog voice FXO

RJ-11

Central office, analog PBX

Analog voice E&M

RJ-45

Analog PBX

BRI S/T WAN
(external NT1)

RJ-45/CB-1D

NT1 device or private integrated network exchange (PINX)

BRI U WAN
(built-in NT1)

RJ-49C/CA-A11

ISDN network

BRI NT/TE
(built-in NT1)

RJ-45

ISDN terminal equipment and ISDN network

56/64-kb/s CSU/DSU

8-pin modular

RJ-48S interface in a subrate device or network

T1/FT1 CSU/DSU

8-pin modular

RJ-48C interface

Gigabit Ethernet SFP, optical

LC

1000BASE-SX, -LX, -LH, -ZX, -CWDM


Table 3 lists the supported interfaces for the Cisco 3800 series routers for Cisco IOS Release 15.0M.

Table 3 Supported Interfaces for the Cisco 3800 Series Integrated Services Routers 

Network Module, WIC, VWIC, VIC, AIM, or PVDM
Product Description
Supported Platforms
3G Wireless WAN Modules

HWIC-3G-HSPA

3GWWAN HWIC-HSPA/UMTS/EDGE/GPRS-850/900/1800/1900/2100MHz

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

Ethernet Routed-Port Network Modules

NM-1-FE-FX-V2

1-port 10/100BASE-FX Single Mode Fiber Fast Ethernet network module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NM-1GE

1-port Cisco Gigabit Ethernet network module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NM-2FE2W-V2

2-port 10/100 Ethernet 12=WIC-slot network module (updated version)

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

Ethernet Switching and LAN Modules

NM-16ESW

16-port 10/100 Cisco EtherSwitch network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-16ESW-C

16-port 10/100 Cisco EtherSwitch network module

Cisco 3825C, Cisco 3845C

NM-16ESW-1GIG

16-port 10/100 Cisco EtherSwitch network module with 1 Gigabit Ethernet (1000BASE-T) port

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-16ESW-1GIG-C

16-port 10/100 Cisco EtherSwitch network module with 1 Gigabit Ethernet (1000BASE-T) port

Cisco 3825C, Cisco 3845C

NM-16ESW-PWR

16-port 10/100 Cisco EtherSwitch network module with in-line power support

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-16ESW-PWR-1GIG

16-port 10/100 Cisco EtherSwitch network module with in-line power and Gigabit Ethernet

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NMD-36ESW

36-port 10/100 Cisco EtherSwitch high-density services module (HDSM)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NMD-36ESW-2GIG

36-port 10/100 Cisco EtherSwitch HDSM with 1 Gigabit Ethernet (1000BASE-T) port

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NMD-36ESW-PWR

36-port 10/100 Cisco EtherSwitch HDSM with in-line power support

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NMD-36ESW-PWR-2G

36-port 10/100 Cisco EtherSwitch HDSM with in-line power and Gigabit Ethernet

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NME-16ES-1G

1 16-port 10/100 EtherSwitch Service Module, 1 10/100/1000 port, and IP Services

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NME-16ES-1G-P

1 16-port 10/100 Cisco EtherSwitch service module with 802.3af, 1 10/100/1000 port, and IP base

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NME-X-23ES-1G

1 23-port 10/100 Cisco EtherSwitch service module with 802.3af, 1 10/100/1000 port w/ 802.3af, and IP base

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NME-X-23ES-1G-P

1 23-port 10/100 Cisco EtherSwitch service module with 802.3af, 1 10/100/1000 port w/ 802.3af, and IP base

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NME-XD-24ES-1S-P

1 24-port 10/100 Cisco EtherSwitch service module with 802.3af, 1 SFP, Cisco StackWise connectors, and IP base

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NME-XD-48ES-2S-P

1 48-port 10/100 Cisco EtherSwitch service module with 802.3af, 2 SFPs, and IP base

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

HWIC-4ESW

4-port single-wide 10/100BASE-T Ethernet switch HWIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

HWIC-4ESW-C

4-port single-wide 10/100BASE-T Ethernet switch HWIC

Cisco 3825C, Cisco 3845C

HWIC-D-9ESW

(8+1)-port double-wide 10/100BASE-T Ethernet switch HWIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

HWIC-D-9ESW-C

9-port double-wide 10/100BASE-T Ethernet switch HWIC

Cisco 3825C, Cisco 3845C

HWIC-4ESW-POE

4-port single-wide 10/100BASE-T Ethernet switch HWIC with integrated in-line power daughter card (802.3af capable)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

HWIC-D-9ESW-POE

(8+1)-port double-wide 10/100BASE-T Ethernet switch HWIC with integrated in-line power daughter card (802.3af capable)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

ILPM4

In-line power daughter card for the HWIC-4ESW with 802.3af capability

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

ILPM8

In-line power daughter card for the HWIC-9ESW with 802.3af capability

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

LAN and WIC Combination Network Modules

NM-1FE1R2W

1 10/100 Ethernet network module with 1 4/16 Token-Ring 2 WAN card slot

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-1FE2W

1 10/100 Ethernet network module with 2 WAN card slots

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-1FE2W-V2

1 10/100 Ethernet network module with 2 WAN card slots

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-2FE2W

2 10/100 Ethernet network modules with 2 WAN card slots

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-2FE2W-V2

2-port 10/100 Ethernet network module with 2 WAN card slots

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-2W

Network module with 2 WAN card slots (no LAN)

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

Serial Connectivity Network Modules

NM-1HSSI

1-port High-Speed Serial Interface (HSSI) network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-1T3/E3

1-port clear-channel T3/E3 network module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NM-2W

2-WIC-slot network module (no LAN)

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NM-4A/S

4-port asynchronous/synchronous serial network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-4T

4-port synchronous serial network module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NM-8A/S

8-port asynchronous/synchronous serial network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-16A

16-port asynchronous serial network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-16A/S

16-port asynchronous/synchronous serial network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-32A

32-port asynchronous serial network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

Channelized T1/E1 and ISDN Network Modules

NM-1CE1T1-PRI

1-port channelized E1/T1/ISDN PRI network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-2CE1T1-PRI

2-port channelized E1/T1/ISDN PRI network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-4B-S/T

4-port ISDN BRI network module (S/T interface)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-4B-U

4-port ISDN BRI network module with integrated NT1
(U interface)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-8B-S/T

8-port ISDN BRI network module (S/T interface)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-8B-U

8-port ISDN BRI network module with integrated NT1 (U interface)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

ATM Network Modules

NM-1A-E3

1-port E3 ATM network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-1A-OC3-POM

1-port ATM OC-3 network module with a single pluggable optical module slot

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NM-1A-T3

1-port DS3 ATM network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-1A-T3/E3

1-port T3/E3 ATM network module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NM-4E1-IMA

4-port E1 ATM network module with IMA

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-4T1-IMA

4-port T1 ATM network module with IMA

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-8E1-IMA

8-port E1 ATM network module with IMA

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-8T1-IMA

8-port T1 ATM network module with IMA

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

Analog Dialup and Remote Access Network Modules

NM-8AM-V2

8-port analog modem network module with v.92

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-16AM-V2

16-port analog modem network module with v.92

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

Analog and ISDN Basic Rate Voice Network Modules and Accessories

NM-HD-1V

1-slot IP communications voice and fax network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HD-2V

2-slot IP communications voice and fax network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HD-2VE

2-slot IP communications enhanced voice and fax network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDA-4FXS

High-density analog voice and fax network module with 4 FXSs

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

EM-HDA-4FXO

4-port FXO voice and fax expansion module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

EM-HDA-8FXS

8-port FXS voice and fax expansion module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

EVM-HD-8FXS/DID

High-density analog and digital extension module for voice and fax-8 FXS/DID

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

EM-HDA-8FXS

8-port voice and fax expansion module-FXS

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

EM-4BRI-NT/TE

4-port voice and fax expansion module-BRI (NT and TE)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

EM-HDA-6FXO

6-port voice and fax expansion module-FXO

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

EM-HDA-3FXS/4FXO

7-port voice and fax expansion module-3FXS/4FXO

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

High-Density Voice Network Modules and Accessories

NM-HDV2

IP communications high-density voice and fax network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV2-1T1/E1

1-port T1/E1 IP communications high-density voice and fax network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV2-2T1/E1

2-port T1/E1 IP communications high-density voice and fax network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-1T1-12

1-port 12-channel T1 voice and fax network module; bundle: NM-HDV with 1 VWIC-1MFT-T1 and 1 PVDM2

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-1T1-24

1-port 24-channel T1 voice and fax network module; bundle: NM-HDV with 1 VWIC-1MFT-T1 and 2 PVDM2s

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-1T1-24E

1-port 24-enhanced channel T1 voice and fax network module; bundle: NM-HDV with 1 VWIC-1MFT-T1 and 2 PVDM2s

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-2T1-48

2-port 48-channel T1 voice and fax network module; bundle: NM-HDV with 1 VWIC-2MFT-T1-DI and 4 PVDM2s

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-1E1-12

1-port 12-channel E1 voice and fax network module; bundle: NM-HDV with 1 VWIC-1MFT-E1 and 1 PVDM2

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-1E1-30

1-port 30-channel E1 voice and fax network module; bundle: NM-HDV with 1 VWIC-1MFT-E1 and 3 PVDM2s

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-1E1-30E

1-port 30-enhanced-channel E1 voice and fax network module, bundle; NM-HDV with 1 VWIC-1MFT-E1 and 5 PVDM2s

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-2E1-60

2-port 60-channel E1 voice and fax network module; bundle: NM-HDV with 1 VWIC-2MFT-E1-DI and 5 PVDM2s

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-1J1-30

1-port 30-channel J1 high-density voice network module; bundle: NM-HDV with 3 PVDM2s and 1 VIC-1J1

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-1J1-30E

1-port 30-enhanced-channel J1 high-density voice network module; bundle: NM-HDV with 5 PVDM2s and 1 VIC-1J1

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-FARM-C36

Network module 36-port DSP farm bundle HDV transcoding and conferencing DSP farm equipped with 2 DSP single in-line memory modules (SIMMs)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-FARM-C54

Network module 54-port DSP farm bundle HDV transcoding and conferencing DSP farm equipped with 3 DSP SIMMs

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-HDV-FARM-C90

Network module 90-port DSP farm bundle HDV transcoding and conferencing DSP farm equipped with 5 DSP SIMMs

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

Application Network Modules

NM-CE-BP-40G-K9

Cisco Content Engine Network Module, basic performance, 40-GB IDE hard disk, 256-MB DRAM

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-CE-BP-80G-K9

Cisco Content Engine Network Module, basic performance, 80-GB IDE hard disk, 512-MB DRAM

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-CE-BP-SCSI-K9

Cisco Content Engine Network Module, basic performance, Small Computer System Interface (SCSI) controller (requires external SCSI disk array)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-CIDS

Cisco IDS network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-NAM

Cisco network analysis module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NME-APPRE-502-K9

Application Runtime Engine (1 GB RAM, 120 GB HDD)

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NME-IPS-K9

Cisco IPS network module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NME-WAE-302-K9

Cisco Wide Area Application Services (WAAS) module with 80 GB hard disk and 512 MB memory

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NME-WAE-502-K9

Cisco Wide Area Application Services (WAAS) module with 120 GB hard disk and 1 GB memory

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

Alarm Monitoring and Control Network Modules and Accessories

NM-AIC-64

Alarm monitoring and control network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

Circuit Emulation over IP (CEoIP) Network Modules

NM-CEM-4SER

4-port serial circuit emulation over IP network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

NM-CEM-4TE1

4-port T1/E1 circuit emulation over IP network module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

Serial WICs and HWICs

HWIC-1T-C

1-port C-series serial high-speed WAN

Cisco 3825C, Cisco 3845C

HWIC-2A/S

2-port synchronous/asynchronous serial port

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

HWIC-2T-C

2-port C-series serial high-speed WAN

Cisco 3825C, Cisco 3845C

HWIC-4A/S

4 low-speed synchronous/asynchronous serial ports

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

HWIC-4T

4 high-speed serial ports

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

HWIC-8A

8 asynchronous EIA-232 serial ports

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

HWIC-8A/S-232

8 low-speed synchronous/asynchronous serial ports, EIA-232 only

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

HWIC-16A

16 asynchronous EIA-232 serial ports

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

WIC-1T

1-port high-speed serial WIC

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

WIC-2A/S

2-port asynchronous/synchronous serial WIC

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

WIC-2T

2-port high-speed serial WIC

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

Channel Service Unit/Data Service Unit (CSU/DSU) WICs

WIC-1DSU-T1-V2

1-port T1/Fractional-T1 DSU/CSU WIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

WIC-1DSU-56K4

1-port 4-wire 56-/64-kb/s CSU/DSU WIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

ISDN BRI WICs

WIC-1B-S/T-V3

1-port ISDN BRI WIC for dial and lease line

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

WIC-1B-U-V2

1-port ISDN BRI with integrated NT1 (U interface)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

DSL WICs

HWIC-1ADSL

1-port ADSLoPOTS

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

WIC-1ADSL

1-port ADSL over basic telephone service WIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

WIC-1ADSL-DG

1-port ADSL over basic telephone service with dying-gasp WIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

WIC-1ADSL-I-DG

1-port ADSL over ISDN with dying-gasp WIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

WIC-1SHDSL

1-port G.SHDSL WIC (two-wire only)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

WIC-1SHDSL-V2

1-port G.SHDSL WIC (two- or four-wire)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

Analog Modem WICs

WIC-1AM

1-port analog modem WIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

WIC-1AM-V2

1-port analog modem (updated version)

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

WIC-2AM

2-port analog modem WIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

WIC-2AM-V2

2-port analog modem (updated version)

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

T1, E1, and G.703 Multiflex Trunk VWICs and WICs

HWIC-1CE1T1-PRI

1-port channelized T1/E1 and PRI

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

HWIC-2CE1T1-PRI

2-port channelized T1/E1 and PRI

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

HWIC-4T1/E1

4-port clear channel T1/E1

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

NM-8CE1T1-PRI

8-port channelized T1/E1 and PRI

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

VWIC-1MFT-T1

1-port RJ-48 multiflex trunk-T1

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VWIC-2MFT-T1

2-port RJ-48 multiflex trunk-T1

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VWIC-2MFT-T1-DI

2-port RJ-48 multiflex trunk-T1 with drop and insert

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VWIC-1MFT-E1

1-port RJ-48 multiflex trunk-E1

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VWIC-1MFT-G703

1-port RJ-48 multiflex trunk-G.703

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPNs

VWIC-2MFT-E1

2-port RJ-48 multiflex trunk-E1

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VWIC-2MFT-E1-DI

2-port RJ-48 multiflex trunk-E1 with drop and insert

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VWIC-2MFT-G703

2-port RJ-48 multiflex trunk-G.703

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VWIC2-1MFT-G703

1-port G.703 multiflex trunk VWIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VWIC2-1MFT-G703-C

1-port E1 only C-series voice/WAN with drop and insert unstructured E1 (G703)

Cisco 3825C, Cisco 3845C

VWIC2-2MFT-G703

2-port G.703 multiflex trunk VWIC

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VWIC2-2MFT-G703-C

2-port E1 only C-Series Voice/WAN with drop and insert unstructured E1 (G703)

Cisco 3825C, Cisco 3845C

Digital Modem Packet Voice/Data Modules

PVDM2-12DM

12-port digital modem module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

PVDM2-24DM

24-port digital modem module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

PVDM2-36DM

36-port digital modem module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

Packet Voice/Data Modules

PVDM2-8

8-channel fax and voice DSP module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

PVDM2-16

16-channel fax and voice DSP module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

PVDM2-32

32-channel fax and voice DSP module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

PVDM2-48

48-channel fax and voice DSP module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

PVDM2-64

64-channel fax and voice DSP module

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

VICs

EVM-HD-8FXS/DID

High density voice/fax extension module—8 FXS/DID

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

VIC-1J1

1-port digital voice interface card (J1) for Japan

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VIC-2DID

2-port DID voice and fax interface card

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VIC-4FXS/DID

4-port FXS or DID VIC

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

VIC2-2BRI-NT/TE

2-port VIC-BRI (NT and TE)

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VIC2-2E/M

2-port VIC E&M

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VIC2-2FXO

2-port VIC-FXO (universal)

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

VIC2-2FXS

2-port VIC-FXS

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

VIC2-4FXO

4-port VIC-FXO (universal)

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

VIC3-2E/M

2-port E&M voice/fax interface card

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

VIC3-2FXS/DID

2-port FXS and DID voice/fax interface card

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

VIC3-2FXS-E/DID

2-port FXS enhanced and DID voice/fax interface card

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

VIC3-4FXS/DID

4-port FXS and DID voice/fax interface card

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

Echo Cancellation Modules

EC-MFT-32

32-channel multiflex trunk dedicated ECAN module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

EC-MFT-64

64-channel multiflex trunk dedicated ECAN module

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

Gigabit Ethernet High-Speed WICs

HWIC-1FE

1-port Fast Ethernet

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

HWIC-1GE-SFP

Cisco Gigabit Ethernet high-speed interface card

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

HWIC-2FE

2-port Fast Ethernet

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

Access Point HWIC

HWIC-AP-AG

 

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

HWIC-AP-G

 

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

AIMs

AIM-ATM

High-performance ATM segmentation and reassembly (SAR) AIM

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

AIM-COMP4

Data-compression AIM

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

AIM-CUE

Cisco Unity Express voice-mail AIM

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

AIM-VPN/EPII-PLUS

Enhanced-performance DES, 3DES, AES, and compression VPN encryption AIM for the Cisco 3825

Cisco 3825

AIM-VPN/HPII-PLUS

Enhanced-performance DES, 3DES, AES, and compression VPN encryption AIM for the Cisco 3845

Cisco 3845

AIM-VPN/SSL-3

Encryption module support

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

USB Memory Options

MEMUSB-64FT

64-MB USB flash token

Cisco 3825,
Cisco 3825-NOVPN,
Cisco 3845,
Cisco 3845-NOVPN

MEMUSB-128FT

128-MB USB flash token

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN

MEMUSB-256FT

256-MB USB flash token

Cisco 3825, Cisco 3825C,
Cisco 3825-NOVPN,
Cisco 3845, Cisco 3845C,
Cisco 3845-NOVPN


Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco 3900 Series Integrated Services Routers

This section contains the following sections with information that is specific to the Cisco 3900 series integrated services routers:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

The Cisco 3900 series integrated services routers are future-enabled with support for new high-capacity digital signal processors for future enhanced video capabilities, high powered service modules with improved availability, multicore CPUs, Gigabit Ethernet switching with enhanced POE, and new energy visibility and control capabilities while enhancing overall system performance. Additionally, a new Cisco IOS Software Universal image and Services Ready Engine module enable you to decouple the deployment of hardware and software, providing a flexible technology foundation that can quickly adapt to evolving network requirements. The Cisco 3900 series integrated services routers offer embedded hardware encryption acceleration, voice- and video-capable DSP slots, optional firewall, intrusion prevention, call processing, voice mail, and application services. In addition, the platform supports the industry's widest range of wired and wireless connectivity options such as T1/E1, T3/E3, xDSL, and Copper and Fiber GE.

Memory Recommendations

For memory recommendations for the Cisco 3900 series integrated services routers in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the following Cisco 3900 series integrated services routers:

Cisco 3925

Cisco 3945

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

For supported modules on the Cisco 3900 series integrated service routers, see the following document:

http://www.cisco.com/en/US/products/ps10536/products_relevant_interfaces_and_modules.html

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco 7000 Series Routers

This section contains the following sections with information that is specific to the Cisco 7000 series router:

Memory Recommendations

Supported Hardware

Feature Support

Memory Recommendations

For memory recommendations for the Cisco 7000 series routers in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.


Note The required memory for the Cisco 7200 series routers has been changed from 256 MB to 512 MB in Cisco IOS Release 15.0(1)M.


Supported Hardware

Cisco IOS Release 15.0M supports the following Cisco 7000 series routers:

Cisco 7200 routers

Cisco 7200 Network Processing Engine (NPE-G1, NPE-G2)

Cisco 7200 Network Processing Engine NPE-400

Cisco 7201 routers

Cisco 7301 routers

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco AS5350XM Universal Gateways

This section contains the following sections with information that is specific to the Cisco AS5350XM universal gateways:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

The Cisco AS5350XM universal gateway is the only one-rack unit, two-, four-, or eight-PRI gateway that provides universal services—data, voice, and fax services on any service, any port. The Cisco AS5350XM offers high performance and high reliability in a compact, modular design. This platform is suited for Internet service providers (ISPs) and enterprises that require universal services.

Memory Recommendations

For memory recommendations for the Cisco AS5350XM universal gateway in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the Cisco AS5350XM universal gateways.

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Table 4 lists the supported interfaces for the Cisco AS5350XM universal gateways.

Table 4 Supported Interfaces for the Cisco AS5350XM Universal Gateways 

Interfaces and Dial Feature Cards
Product Description

Dial Feature Cards

AS535-DFC-60NP

AS535-DFC-108NP

AS535-DFC-CT3

2 PRI DFC, 4 PRI DFC, 8 PRI DFC

Dial-Only Dial Feature Card

Modem calls, ISDN digital calls, V.110 data calls, and V.120 data calls

LAN Interfaces

Fast Ethernet 10/100BASE-T (RJ-45)

Gigabit Ethernet 10/100/1000BASE-T (RJ-45)

Trunk/Backhaul Interface Options

CT3 DFC

2PRI CT1/CE1 DFC, 4PRI CT1/CE1 DFC, 8PRI CT1/CE1 DFC

Two 8-MB serial ports


Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco AS5400XM Universal Gateways

This section contains the following sections with information that is specific to the Cisco AS5400XM universal gateways:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

The Cisco AS5400XM universal gateway is a two-rack unit, 8-, 12-, or 16-T1/E1, 1-CT3 gateway that provides universal port data, voice, and fax services on any port at any time. The Cisco AS5400XM offers high performance and high reliability in a compact, modular design. This platform is intended for Internet service providers (ISPs) and enterprises that require innovative universal services.

Memory Recommendations

For memory recommendations for the Cisco AS5400XM universal gateways in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the Cisco AS5400XM universal gateways.

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Table 5 lists the supported interfaces for the Cisco AS5400XM universal gateways for Cisco IOS Release 15.0M.

Table 5 Supported Interfaces for the Cisco AS5400XM Universal Gateways 

Interfaces and Dial Feature Cards
Product Description

Dial Feature Cards

AS54-DFC-CT3

AS54-DFC-60NP

AS54-DFC-108NP

2 PRI DFC, 4 PRI DFC, 8 PRI DFC

Dial-Only Dial Feature Card

Modem calls, ISDN digital calls, V.110 data calls, and V.120 data calls

LAN Interfaces

Fast Ethernet 10/100BASE-T (RJ-45)

Gigabit Ethernet 10/100/1000BASE-T (RJ-45)

Trunk/Backhaul Interface Options

2PRI CT1/CE1 DFC, 4PRI CT1/CE1 DFC, 8PRI CT1/CE1 DFC

CT3 DFC

2 serial ports on the motherboard


Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco IAD2430 Series Integrated Access Devices

This section contains the following sections with information that is specific to the Cisco IAD2430 series integrated access devices:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

The Cisco IAD2430 is an integrated voice and data services platform for service providers, building on the Cisco IAD2420 series IAD. The Cisco IAD2430 series offers software functionality such as MGCP SRST used to accelerate the migration from TDM to VoIP. The Cisco IAD2430 series harnesses the maturity of the Cisco IAD2420 series software and enhances functionality by providing more capabilities such as denser interfaces (up to 24 FXS or up to 2 voice and 2 data T1s), encryption, and DC power backup while maintaining its 1RU form factor for space saving service provider- managed services deployment.

Memory Recommendations

For memory recommendations for the Cisco IAD2430 series integrated access devices in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the following Cisco IAD2430 series integrated access devices:

Cisco IAD2430

Cisco IAD2431

Cisco IAD2432

Cisco IAD2435

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Each Cisco IAD2430 series integrated access device is preconfigured for one WAN port. The WAN port can be an FE or T1/E1 port. When the platform has two T1/E1 ports, one can be used as a DSU port and the other can be used as a digital voice port for connection to a PBX.

Table 6 lists the supported interfaces for the Cisco IAD2430 series integrated access devices.

Table 6 Supported Interfaces on the Cisco IAD2430 Series Integrated Access Devices 

Interface and Port
Product Description
Supported IAD2430 Models

10/100BASE-T Fast Ethernet port

All Cisco IAD2430 series models have two 10/100BASE-T Fast Ethernet ports except for Cisco2431-8FXS IAD, which has one.

All

Console and auxiliary ports

One EIA/TIA-32 asynchronous serial port for connection to a console.

One EIA/TIA-32 asynchronous serial port for connection to a modem.

All

Console and auxiliary ports

Dual-purpose single EIA/TIA-32 asynchronous serial port for connection to a console or modem.

IAD2435-8FXS

Analog FXS voice ports over RJ-21 connector

One 8-line or 16-line analog or 24-line FXS interface (loop-start or ground-start) for connection to analog phones, key systems, or PBXs.

IAD2430-24FXS: 24 ports

IAD2431-8FXS: 8 ports

IAD2431-16FXS: 16 ports

IAD2432-24FXS: 24 ports

IAD2435-8FXS

VIC2-4FX0

All models support one VIC slot, except for Cisco IAD2430-24FXS IAD, which supports none.

IAD2431-8FXS

IAD2431-16FXS

IAD2431-1T1E1

IAD2432-24FXS

T1/E1 Port

Two or one T1 ports for WAN connection or with channel-associated signaling (CAS) for connection to a digital PBX, except for Cisco IAD2430-24FXS IAD, which supports none. E1 ports are not supported.

IAD2431-8FXS: 1 port

IAD2431-16FXS: 1 port

IAD2431-1T1E1: 2 ports

IAD2432-24FXS: 2 ports

WIC-2T

All models support one WIC slot, except for Cisco IAD2430-24FXS IAD, which supports none. The supported WICs are WIC-2T and WIC-1DSU-T1.

One 2T port (balanced, per ANSI T1.403) for connection to a WAN or carrier network or for a serial connection

IAD2431-8FXS

IAD2431-16FXS

IAD2431-1T1E1

IAD2432-24FXS

WIC-1DSU-T1

One DSU port for connection to a WAN or carrier network.

IAD2431-8FXS

IAD2431-16FXS

IAD2431-1T1E1

IAD2432-24FXS

External compact flash card

An external compact flash card is supported on all models.

All


The supported WICs and VICs are:

VIC2-2FXO

VIC2-2FXS

VIC-4FXS/DID

VIC2-2BRI-NT/TE

WIC-1T

WIC-1ADSL

WIC-1SHDSL

WIC-1ADSL-DG

WIC-1SHDSL-V2

VWIC-2MFT-T1

VWIC-2MFT-E1

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco IAD2801 Series Integrated Access Devices

This section contains the following sections with information that is specific to the Cisco IAD2801 series integrated access devices:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

The following Cisco IAD2801 models are supported:

IAD2801-2BRI-A/K9—Fixed configuration router, with integrated PVDM2-8, HWIC-1ADSL, and 1 VIC2-2BRI-NT/TE-P, 2 Fast Ethernet connections, and 1 factory-configurable HWIC slot.

IAD2801-4BRI-A/K9—Fixed configuration router, with integrated PVDM2-16, HWIC-1ADSL, and 2 VIC2-2BRI-NT/TE-P, 2 Fast Ethernet connections, and 1 factory-configurable HWIC slot.

IAD2801-4BRI-S/K9—Fixed configuration router, with integrated PVDM2-16, HWIC-4SHDSL, and 2 VIC2-2BRI-NT/TE-P, 2 Fast Ethernet connections, and 1 factory-configurable HWIC slot.

IAD2801-4BRI-S/K9- Fixed configuration router, with integrated PVDM2-16, HWIC-4SHDSL.

The following cards are supported in the factory-configurable HWIC slot on all models:

HWIC-4ESW

HWIC-AP-AG-E or HWIC-AP-G-E

VIC-4FXS

Memory Recommendations

For memory recommendations for the Cisco IAD2801 series integrated access devices in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the Cisco IAD2801 series integrated access devices.

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco VG200 Series Analog Voice Gateways

This section contains the following sections with information that is specific to the Cisco VG200 and Cisco VG204 analog voice gateways:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

The Cisco VG200 voice gateways are analog voice gateways for use in the service provider, commercial and enterprise markets. The Cisco VG200 voice gateways provide 2-, 4-, and 24-FXS analog voice interfaces to connect to analog phones, fax machines and analog voice modems.

Memory Recommendations

For memory recommendations for the Cisco VG202 and VG204 voice gateways in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.1T supports the following Cisco VG200 series analog voice gateways:

Cisco VG202

Cisco VG204

Cisco VG224

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.

Cisco VGD 1T3 Voice Gateways

This section contains the following sections with information that is specific to the Cisco VG224 analog gateways:

Introduction

Memory Recommendations

Supported Hardware

Feature Support

Introduction

The Cisco VGD 1T3 is a high-density voice gateway with up to one Channelized T3 (CT3) of VoIP capacity with support for Cisco Unified Communications Manager and Cisco Voice Portal applications with Media Gateway Control Protocol (MGCP). The Cisco VGD 1T3 voice gateway offers unparalleled capacity in only two rack units (RUs) and provides voice and fax services.

Memory Recommendations

For memory recommendations for the Cisco VGD-1T#224 analog gateway in Cisco IOS Release 15.0M, see the "Memory Recommendations" section.

Supported Hardware

Cisco IOS Release 15.0M supports the Cisco VGD 1T3 platform.

For detailed descriptions of the new hardware features, see the "New and Changed Information" section.

For additional information about supported hardware for this platform and release, go to the Cisco Feature Navigator home page at the following URL:

http://www.cisco.com/go/cfn

Feature Support

For feature support in Cisco IOS Release 15.0M, see the "Feature Support" section.