Guest

Cisco IOS Software Releases 12.4 T

SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways

  • Viewing Options

  • PDF (182.8 KB)
  • Feedback
SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways

Table Of Contents

SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways


SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways


First Published: June 27, 2005
Last Updated: August 1, 2008

This feature enables Skinny Client Control Protocol (SCCP) supplementary features for analog FXS ports on a Cisco IOS voice gateway under the control of Cisco Unified Communications Manager or a Cisco Unified Communications Manager Express (Cisco Unified CME) system.

Configuration Information

Configuration information is included in the "Configuring SCCP Controlled Analog (FXS) Ports with Supplementary Features in Cisco IOS Gateways" module in the Supplementary Services Features for FXS Ports on Cisco IOS Voice Gateways Configuration Guide at the following URL:

http://cisco.com/en/US/docs/ios/voice/fxs/configuration/guide/fxssccpsplmft.html

Command Reference Information

Command reference information is included in the the Cisco IOS Voice Command Reference, Release 12.4T, at the following URL:

http://cisco.com/en/US/docs/ios/12_3t/voice/command/reference/123tvr.html

New or Modified Commands

The following commands are new or modified for this feature:

call forward all

call forward cancel

debug voip application stcapp buffer-history

pickup direct

pickup group

pickup local

prefix (stcapp-fac)

prefix (stcapp-fsd)

redial, show stcapp buffer-history

show stcapp device

show stcapp feature codes

speed dial

stcapp feature access-code

stcapp feature speed-dial

supervisory disconnect

timeouts power-denial

voicemail (stcapp-fsd)

List of All Release 12.4T Commands

An alphabetical list of all Cisco IOS Release 12.4T commands is in the Cisco IOS Master Commands List, All Releases, at the following URL:

http://www.cisco.com/en/US/docs/ios/mcl/allreleasemcl/all_book.html

List of All New, Modified, Removed, and Replaced Release 12.4T Commands

Alphabetized lists of all new, modified, removed, and replaced commands for each Cisco IOS Release 12.4T release are in the Cisco IOS New, Modified, Removed, and Replaced Commands, Release 12.4T, document at the following URL:

http://www.cisco.com/en/US/products/ps6441/products_product_index09186a00805db026.html

Table 1 Feature Information for SCCP Analog Ports 

Feature Name
Releases
Feature Information

SCCP Controlled Analog (FXS) Ports with Supplementary Features in IOS Gateways

12.4(2)T

Enables SCCP supplementary features on analog FXS ports on a Cisco VG 224 voice gateway under the control of Cisco Unified Communications Manager or Cisco Unified CME.

The following sections provide information about this feature:

Cisco IOS Voice Gateway Interoperability with Cisco Unified Communications Manager or Cisco Unified CME, page 3

SCCP Analog Phone Feature Descriptions, page 7

Enabling SCCP on the Voice Gateway, page 14

Enabling the STC Application for Analog Ports, page 21

The following commands were introduced or modified by this feature: call forward all, call forward cancel, debug voip application stcapp buffer-history, pickup direct, pickup group, pickup local, prefix (stcapp-fac), prefix (stcapp-fsd), redial, show stcapp buffer-history, show stcapp device, show stcapp feature codes, speed dial, stcapp feature access-code, stcapp feature speed-dial, supervisory disconnect, timeouts power-denial, voicemail (stcapp-fsd).

SCCP PLAR with DTMF Out-Pulse Digits for FXS Analog Phones

12.4(6)T

Adds private line automatic ring-down (PLAR) support and enhanced speed-dial capabilities for SCCP analog ports on a Cisco VG 224 voice gateway under the control of Cisco Unified Communications Manager or a Cisco Unified CME system.

The following sections provide information about this feature:

PLAR with DTMF Out-Pulse Digits, page 6

Enhanced Speed Dial on SCCP Analog Phones, page 5

Enabling and Changing Feature Speed-Dial Codes, page 27

Configuring PLAR with DTMF Out-Pulse Digits, page 32

The following commands were introduced or modified by this feature: debug condition voice-port, digit, sccp plar, show stcapp feature codes, speed dial, voicemail (stcapp-fsd), voiceport.