Cisco Nexus 9000 Series NX-OS Release Notes, Release 10.3(5)M
Available Languages
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- US/Canada 800-553-2447
- Worldwide Support Phone Numbers
- All Tools
Feedback
Feedback
This document describes the features, issues, and exceptions of Cisco NX-OS Release 10.3(5)M software for use on Cisco Nexus 9000 Series switches.
The Cisco NX-OS Software Strategy and Lifecycle Guide provides details about the new Cisco NX-OS Software Release and Image-naming Convention.
Note: The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product.
The following table lists the changes to this document:
| Date |
Description |
| May 09, 2024 |
New and Enhanced Software Features
There are no new software features introduced in Cisco NX-OS Release 10.3(5)M.
There are no new hardware features introduced in Cisco NX-OS Release 10.3(5)M.
For details about transceivers and cables that are supported on a switch, see the Transceiver Module (TMG) Compatibility Matrix.
In Cisco NX-OS Release 10.3(5)M, the following two 64-bit images are supported:
● The 64-bit Cisco NX-OS image filename with "nxos64-cs” as the prefix (for example, nxos64-cs.10.3.4a.M.bin) is supported on all Cisco Nexus 9000 series switches except Cisco Nexus 9500 -R and -R2 switches and cards.
● The 64-bit Cisco NX-OS image filename with "nxos64-msll” as the prefix (for example, nxos64-msll.10.3.4a.M.bin) is supported on Cisco Nexus 9000 -R and -R2 series modular switches.
The 32-bit image is no longer supported.
| Identifier |
Headline |
| All traffic stops when a port with speed 2.5G/5G is oversubscribed. |
|
| DHCP Discover is dropped with custom COPP policy on L2 only n9k without SVI nor DHCP feature enabled. |
|
| Disable "spanning-tree fcoe" in Nexus 9000 device. |
|
| Policer idx mismatches seen on Cisco Nexus 9300-FX3, GX, GX2 after the ND ISSU sequence – Release 10.2x to 10.2x to 10.3(5). |
| Identifier |
Headline |
| N9K EOR N9K-X9736C-FX module is up online even when the link is down |
|
| N9K-SNMP: snmp use-ipv4acl cmd accepted even though the associated snmp-user is not configured. |
|
| N3548: Spanning tree is not working in pvlan configured ports |
|
| Nexus 93108TC-FX3P in fex mode is dropping the traffic when a port-channel lacp interface goes down |
|
| VPC attached multicast receivers cannot subscribe to some multicast groups |
|
| mNAT/SR interfaces lose Multicast Traffic while OIFs are added or deleted in an NBM Passive setup |
|
| N9k VXLAN ARP Suppression Cache stuck with Stale entries for End points |
|
| NXOS - RFC5424 timestamp hour is shifted by local zone offset |
|
| When configuring secondary IP on interface, 'no ip redirects' is not programmed correctly on ELTM |
|
| Memory hold up in LC causing LC kernel Panic |
|
| NFP process reloaded unexpectedly after processing a config flow |
|
| CCTRL cored because of CDR Interrupts |
|
| After reload of 93108TC-FX3P/N9K-C93108TC-FX3H random copper/RJ45 interfaces might not come up |
|
| Exported flow-record Duration is negative, StartTime more than EndTime |
|
| Address json lib usage to avoid infinite loop |
|
| Route-target representation of ASN4:NN in as-dot notation is not correct |
|
| BFD went down after removing Vrf/Vlan config |
|
| Restart SMU install operation will fail - "failed because could not get affected services". |
|
| Nexus 9k Switch Reloads Due To TAHUSD process |
|
| N9K snmp-server enable traps lldp lldpRemTablesChange duplicated after upgrade |
|
| Incorrect airflow and fan direction in PSU on N9K-C93360YC-FX2 |
|
| ARP request dropped by ARP Suppression in traditional VLAN |
|
| N9K: Feature "Hardware-Telemetry" can be enabled on FX when it is not supported |
|
| NX-OS removes or will not apply `fec rs-ieee` command to port-channel member interfaces |
|
| SNMP sysDescr value is incorrect following a factory-reset on end-of-rack switches |
|
| Executing Control Plane Policy stats takes longer than expected on 93360YC-FX2 |
|
| Glean traffic not punt to CPU |
|
| ‘no link dfe adaptive-tuning’ doesn't take effect on DAC ports |
|
| MAC address table doesn't change via GARP during MAC move |
|
| Unable login sandbox when generate password will expire message on N9K but not yet expire. |
|
| N9k: Packet tracer shows hits for non-existing flows |
|
| [NXOS] Nexus 9000 with M1100 goes into Read Only condition |
|
| Wrong dot1q private-vlan tag after LACP update |
|
| Copy http more slowly from a remote server when the latency to the server is high |
|
| MTC-XL - Optimize the internal handling of wideflow keyword for show commands. |
|
| %NPACL-2-IPT_WARNING: npacl - ACL with REMARK not supported on mgmt interface, wrong Seq # |
|
| VPC port-channel experiences extra flap and packet loss during LACP change |
|
| GX2 devices - Control plane/Stats gets struck intermittently |
|
| N9K 10.3(3) - Unexpected reloads due to BGP process crashing with route dampening active |
|
| Cisco NX-OS Software External Border Gateway Protocol Denial of Service Vulnerability |
|
| Mem leak seen in ospf with Opaque Area LSA |
|
| N9K: FEX HIF TX_FRM_ERROR do not relate to "output error" under "show interface" |
|
| N3548: One Adjacency of ip routing not working in some failover scenario |
|
| feature hardware-telemetry causing Mac Moves: L2FM-4-L2FM_MAC_MOVE |
|
| Remove the port speed capabilities 100,2500 and 5000 in FX3P FEX, fix deletion of speed |
|
| Nexus 9364GX2A - Slice 0 discards Multicast traffic after RTP Flow Monitor is enabled |
|
| N9K-C9332C: BootupPortLoopback failing on Ethernet1/1 after reload |
|
| N9K FX3/GX Multicast MAC ACL hardware programming mistake, causes drop all ip traffic |
|
| NPM fails to detect an ACLQOS programming failure |
|
| Evaluation of n9k-standalone-sw for HTTP/2 Rapid Reset Attack vulnerability |
|
| continuous xbc check_oor_r4, r5, r7 interupts seen on FX platform |
|
| PBR hits CoPP l3uc/glean class |
|
| Crash "aclqos hap reset" is occurred in Nexus 3500 |
|
| N3500XL may send untranslated traffic via NAT outside interface w/ static NAT outside configuration |
|
| Syslog %LICMGR-6-LOG_LICAPP_SMART_GLOBAL_CHANGE removal |
|
| Nexus 9500: Configuring "feature nv overlay" breaks non-VXLAN VLAN Multicast across FM-G modules |
|
| N9K: Traffic redirected to Ethernet1/1 if PACL has redirect option to a port missing XCVR |
|
| Nexus switches violate RFC2236 by not ignoring out of subnet igmp report |
|
| While Changing the IP of an interface using Netconf , it error's out |
|
| N3500 NAT tcp syn timer continuously expires while tcp flow is active |
|
| N9K dhcpv6 config is missing on SVI after reload. |
|
| Active connector status shows RJ 45 even when SFP is inserted and link is down |
|
| VXLAN - Traffic to IP x.x.137.2 is wrongly intercepted by OAM Sup ACL |
|
| PTP delay request message not being forwarded by N9K-X9636C-R |
|
| MAC address stays unlearned across Interfaces after Causing a Port-Security on another interface |
|
| udld neighbor mismatch on span source port-channels |
|
| Nexus 93180YC-FX missing vsan database config after vxlan overlay profile is configured |
|
| CSUSD Hap Reset on Nexus 9k When Adding Interface Breakout Config w/ N9K-X9400-16W Linecard |
|
| Deleting ACEs with "No Remark <argument>" command become error. |
|
| N3500 SPAN buffer threshold cli inconsistency |
|
| VSH.bin process crashing due to bulk prefix-list config push with out sequence number defined. |
|
| dot1x radius-accounting did not works with ISE due to unknown Acct-Status-Type |
|
| Failed to restore macsec policy from PSS after upgrade from 9.2.1 to 9.3.13 to 10.3.4a |
|
| BFD packet not hit the ACL entry as expected. |
|
| Seeing error logs on upgrade: invalid group file entry delete line 'aaa-db-operator:508:'? No |
|
| USB port cannot be disabled |
|
| N9K-NETCONF edit-config RPC modifies Startup-config |
|
| SFP mgmt0 interoperability issue with NCS platform |
|
| Nexus 9k Interfaces go down (Link failure) after connecting SFP to Switch. |
|
| N9K MPLS VPN traffic dropped after changing L3 port to L2 and back to L3 |
|
| Inconsistency between show interface int-id counters details all and NXAPI-REST output |
|
| N9K - ePBR/PBR - Traffic sent to Incorrect NH |
|
| Race condition between PMN, MRIB and PIM |
|
| NFM Core Crash When Adding Netflow Configuration to Nexus 9k |
|
| Fragmented ping6 is incrementing reasmok + reasmfail for working ping6 |
|
| N9k with feature netconf enable opening backdoor |
|
| Changing VPC Domain ID prompts the "[no]" default action twice |
|
| N9k SR mNAT traffic may leave interface without NAT during an OIF change |
|
| Need warning message when upgrading EPLD on N9500 that vPC can go down |
|
| Incorrect behavior seen when configuring jumbo MTU on FEX PO |
|
| Nexus 9000 Cloud Scale switches with mix of static and dynamic queue-limit drops low-rate traffic |
|
| N9K-C93600CD-GX: OIR of 2nd, 3rd or 4th port in quad with QSA28 causes all ports in the quad to flap |
|
| Nexus 93108TC-FX3P : 'Unicast Routing ECMP-0 for size 2 creation failed INVALID PARAM(0)' seen |
|
| When SPAN filter TCAM region is carved from defult 512 to 256, SPAN is not functioning |
|
| CDP core at cdpd_obj_delete_intf_addr_runtime_data |
|
| Yang Model get_diff "source" and "target" have Incorrect Information |
|
| Unable to delete a Vlan access-map even though access map is not used in any filter. |
|
| Show tech multicast missing "show ip pim internal event-history data-register-receive" command |
|
| Wrong trap value is being sent while performing FRU of PSU |
|
| N3500 per-link BFD may not work when configured in specific order |
|
| MTS pile up for Multiple process(L2FM/FIB/ARP) due to slow SDB writes |
|
| N9K - Memory leak in tahusd process after EVPN uplink flap on FX3/GX/GX2/HX switch |
|
| N3500 "hardware profile buffer span-threshold xx" gets reset after egress link flap |
|
| ospf authentication-key <string> shows incorrect max-length error |
|
| No error logs issued when using 1G speed on 10G interface |
|
| Nexus 3548: Configuring "link loopback" leads to vsh.bin core and crash |
|
| 9332-GX2B: DoM not supported error with 3rd party 100G AOC |
|
| Egress RACL stats per-entry showing doubled counter when SPAN source also configured |
|
| N9K-C93180YC-FX3: GNSS LED is red when GPS/GNSS antenna not connected and SyncE not enabled |
|
| Multicast (S,G) traffic dropped (hitting sg-rpf-failure exception) |
|
| N3500 NAT TS miss aclqos NAT related output |
|
| NX-OS IPv6 PTP Destination Multicast Uses Node-Local but should use Link-Local Scope |
|
| N3500 logs endlessly misleading mcast NAT related error msg without mcast NAT configuration |
|
| N9k: Syslog %PLATFORM-2-PS_CAPACITY_CHANGE seen with NXA-PDC-2KW-PE |
|
| BGP metric in `show ip bgp` abnormally changed after upgrade |
|
| Unable to see RBAC policy regex configuration in the running config. |
|
| "link debounce link-up time xx" config disappear after performing conf replace |
|
| IPv6 ND NA packet dropped due to strict uRPF/UC_RPF_FAIILUR |
|
| N3548 'show running' does not include complete SR configuration |
|
| ssh -p 830 without subsystem accesses vsh |
|
| SSH login triggers TACACS "temporary failure in name resolution" after reload/upgrade |
|
| N9K VXLAN: A short loop occurs at the moment the peer-link is up after VPC peer restart |
|
| Remove 'test forwarding inconsistency' on nexus 3548 switches |
|
| N9K: Deleting interface vlan might cause MTU mis-programming on interfaces configured with high MTU |
|
| Fabric Module reload due to ipfib process |
|
| All interfaces show the input/output rate as 0pps on N9K FX2 platform |
|
| On 92348GC-X, see one or both power supply shutdown, even when the system is up |
|
| N9K-C9348GC-FXP - Front Port - No Traffic Received in RX Direction |
|
| Nexus 3600 Stale MPLS Labels after a Route Change |
|
| EPBR session ACL refresh fails if ACL name length greater of equal to 32 characters |
|
| Special character '\" used as switch username cause nxapi calls to fail |
|
| N9K crashes after an upgrade due to aclqos process |
|
| Login with "admin" user with incorrect password allowed when "none" aaa authentication is configured |
|
| Multicast load-balancing may not work with 'ip multicast multipath s-g-hash next-hop-based' config |
|
| BUM traffic drops after the DCI link on BGW has flapped |
|
| ERROR: "symbol lookup error: /isan/lib/libsflow.so: undefined symbol: ipv6_is_zero_addr" |
|
| Unicast traffic broken as broadcast/ARP being blackholed in FEX fabric ports |
|
| SPAN To CPU: causing some of the traffic to hit the wrong queue |
|
| show system internal acces-list globals displays negative value for remaining free size |
|
| N3500 service-reflect fails to forward mcast traffic with *G1 to S2G2 translation configuration |
|
| SVI Counter stopped incrementing. |
|
| Confirm if CVE-2023-48795 impacts Nexus 9000 |
|
| After upgrade from 9.3 to 10.2.6M "remove-private-as all" BGP configuration does not work |
|
| N9K sflow - fix errors seen when using incorrect sampler rate values |
|
| Netflow config is causing a crash if it is entered on a high number of vlans at the same time |
|
| N9K BGP route metric in RIB does not update after MED change when using Multipath |
|
| More vlans are being consumed on outer_bd on 10.2(x) versions |
|
| Crash with ufdm process due mts buffer errors |
|
| N9K - ACL-Based & SPAN - Traffic Not Hitting Matching Entry |
|
| Throw warning syslog if route-policy/list is removed when it is referenced by routing clients |
|
| VXLAN: BUM Traffic Loop when PIM BiDir and Fabric Peering are used together |
|
| "bfd-app" should not be spawned in production nodes |
|
| NX-OS Does not process LLDP frames with VLAN-NAME TLV |
|
| After running command 'tac-pac' the 'feature bash-shell' will be enabled |
|
| Interface down reason not set correctly when down due to missing FKA |
The following tables list the Cisco Nexus 9000 Series hardware that Cisco NX-OS Release 10.3(5)M supports. For additional information about the supported hardware, see the Hardware Installation Guide for your Cisco Nexus 9000 Series device.
Table 1. Cisco Nexus 9400 Switches
| Product ID |
Description |
| N9K-C9408 |
4-rack unit (RU) 8-slot LEM-based modular chassis switch, which is configurable with up to 128 200-Gigabit QSFP56 (256 100-Gigabit by breakout) ports or 64 400-Gigabit ports. |
| N9K-C9400-SUP-A |
Cisco Nexus 9400 Supervisor Card |
| N9K-C9400-SW-GX2A |
Cisco Nexus 9400 25.6Tbps Switch Card |
| N9K-X9400-8D |
Cisco Nexus 9400 8p 400G QSFP-DD LEM |
| N9K-X9400-16W |
Cisco Nexus 9400 16p 200G QSFP56 LEM |
Table 2. Cisco Nexus 9800 Switches
| Product ID |
Description |
| N9K-C9808 |
16-RU modular switch with slots for up to 8 Line Cards in addition to two supervisors, 8 fabric modules, 4 fan trays, and 3 power trays. |
Table 3. Cisco Nexus 9800 Series Line Cards
| Product ID |
Description |
| N9K-X9836DM-A |
Cisco Nexus 9800 36-port 400G QSFP-DD Line Card with MACsec. |
Table 4. Cisco Nexus 9800 Series Fabric Modules
| Product ID |
Description |
| N9K-C9808-FM-A |
Cisco Nexus 9800 Fabric Module with for 8-slot Chassis |
Table 5. Cisco Nexus 9800 Supervisor Module
| Product ID |
Description |
Quantity |
| N9K-C9800-SUP-A |
Cisco Nexus 9800 Platform Supervisor Module |
* |
Table 6. Cisco Nexus 9800 Fans and Fan Trays
| Product ID |
Description |
Quantity |
| N9K-C9808-FAN-A |
Cisco Nexus 9800 8-slot chassis fan tray (1st Generation) |
4 |
Table 7. Cisco Nexus 9800 Power Supplies
| Product ID |
Description |
Quantity |
Cisco Nexus Switches |
| NXK-HV6.3KW20A-A |
Cisco Nexus 9800 6,300W 20A AC and HV Power Supply |
9 (3 per tray) |
Cisco Nexus 9808 |
Table 8. Cisco Nexus 9500 Switches
| Product ID |
Description |
| N9K-C9504 |
7.1-RU modular switch with slots for up to 4 Line Cards in addition to two supervisors, 2 system controllers, 3 to 6 fabric modules, 3 fan trays, and up to 4 power supplies. |
| N9K-C9508 |
13-RU modular switch with slots for up to 8 Line Cards in addition to two supervisors, 2 system controllers, 3 to 6 fabric modules, 3 fan trays, and up to 8 power supplies. |
| N9K-C9516 |
21-RU modular switch with slots for up to 16 Line Cards in addition to two supervisors, 2 system controllers, 3 to 6 fabric modules, 3 fan trays, and up to 10 power supplies. |
Table 9. Cisco Nexus 9500 Cloud Scale Line Cards
| Product ID |
Description |
Maximum Quantity |
||
| Cisco Nexus |
Cisco Nexus |
Cisco Nexus |
||
| N9K-X9716D-GX |
Cisco Nexus 9500 16-port 400G QSFP-DD Line Card |
4 |
8 |
N/A |
| N9K-X9736C-FX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
| N9K-X9788TC-FX |
Cisco Nexus 9500 48-port 1/10-G BASE-T Ethernet and 4-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
| N9K-X97160YC-EX |
Cisco Nexus 9500 48-port 10/25-Gigabit Ethernet SFP28 and 4-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
| N9K-X9732C-FX |
Cisco Nexus 9500 32-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
| N9K-X9732C-EX |
Cisco Nexus 9500 32-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
| N9K-X9736C-EX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
16 |
Table 10. Cisco Nexus 9500 R-Series Line Cards
| Product ID |
Description |
Maximum Quantity |
|
| Cisco Nexus 9504 |
Cisco Nexus 9508 |
||
| N9K-X9636C-R |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
| N9K-X9636C-RX |
Cisco Nexus 9500 36-port 40/100 Gigabit Ethernet QSFP28 Line Card |
4 |
8 |
| N9K-X9636Q-R |
Cisco Nexus 9500 36-port 40 Gigabit Ethernet QSFP Line Card |
4 |
8 |
| N9K-X96136YC-R |
Cisco Nexus 9500 16-port 1/10 Gigabit, 32-port 10/25 Gigabit, and 4-port 40/100 Gigabit Ethernet Line Card |
4 |
8 |
| N9K-X9624D-R2 |
Cisco Nexus 9500 24-port 400 Gigabit QDD Line Card |
Not supported |
8 |
Table 11. Cisco Nexus 9500 Cloud Scale Fabric Modules
| Product ID |
Description |
Minimum |
Maximum |
| N9K-C9504-FM-E |
Cisco Nexus 9504 100-Gigabit cloud scale fabric module |
4 |
5 |
| N9K-C9504-FM-G |
Cisco Nexus 9500 4-slot 1.6Tbps cloud scale fabric module |
4 |
5 |
| N9K-C9508-FM-E |
Cisco Nexus 9508 100-Gigabit cloud scale fabric module |
4 |
5 |
| N9K-C9508-FM-E2 |
Cisco Nexus 9508 100-Gigabit cloud scale fabric module |
4 |
5 |
| N9K-C9508-FM-G |
Cisco Nexus 9500 8-slot 1.6Tbps cloud-scale fabric module |
4 |
5 |
| N9K-C9516-FM-E2 |
Cisco Nexus 9516 100-Gigabit cloud scale fabric module |
4 |
5 |
Table 12. Cisco Nexus 9500 R-Series Fabric Modules
| Product ID |
Description |
Minimum |
Maximum |
| N9K-C9504-FM-R |
Cisco Nexus 9504 100-Gigabit R-Series fabric module |
4 |
6 |
| N9K-C9508-FM-R |
Cisco Nexus 9508 100-Gigabit R-Series fabric module |
4 |
6 |
| N9K-C9508-FM-R2 |
Cisco Nexus 9508 400-Gigabit R-Series fabric module |
4 |
6 |
Table 13. Cisco Nexus 9500 Supervisor Modules
| Supervisor |
Description |
Quantity |
| N9K-SUP-A |
1.8-GHz supervisor module with 4 cores, 4 threads, and 16 GB of memory |
2 |
| N9K-SUP-A+ |
1.8-GHz supervisor module with 4 cores, 8 threads, and 16 GB of memory |
2 |
| N9K-SUP-B |
2.2-GHz supervisor module with 6 cores, 12 threads, and 24 GB of memory |
2 |
| N9K-SUP-B+ |
1.9-GHz supervisor module with 6 cores, 12 threads, and 32 GB of memory |
2 |
Note: N9K-SUP-A and N9K-SUP-A+ are not supported on Cisco Nexus 9504 and 9508 switches with -R Line Cards.
Table 14. Cisco Nexus 9500 System Controller
| Product ID |
Description |
Quantity |
| N9K-SC-A |
Cisco Nexus 9500 Platform System Controller Module |
2 |
Table 15. Cisco Nexus 9500 Fans and Fan Trays
| Product ID |
Description |
Quantity |
| N9K-C9504-FAN |
Fan tray for 4-slot modular chassis |
3 |
| N9K-C9504-FAN2 |
Fan tray that supports the Cisco N9K-C9504-FM-G fabric module |
3 |
| N9K-C9508-FAN |
Fan tray for 8-slot modular chassis |
3 |
| N9K-C9508-FAN2 |
Fan tray that supports the Cisco N9K-C9508-FM-G fabric module |
3 |
| N9K-C9516-FAN |
Fan tray for 16-slot modular chassis |
3 |
Table 16. Cisco Nexus 9500 Fabric Module Blanks with Power Connector
| Product ID |
Description |
Minimum |
Maximum |
| N9K-C9504-FAN-PWR |
Nexus 9500 4-slot chassis 400G cloud scale fan tray power connector |
1 |
2 |
| N9K-C9508-FAN-PWR |
Nexus 9500 4-slot chassis 400G cloud scale fan tray power connector |
1 |
2 |
Table 17. Cisco Nexus 9500 Power Supplies
| Product ID |
Description |
Quantity |
Cisco Nexus Switches |
| N9K-PAC-3000W-B |
3 KW AC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
| N9K-PDC-3000W-B |
3 KW DC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
| N9K-PUV-3000W-B |
3 KW Universal AC/DC power supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
| N9K-PUV2-3000W-B |
3.15-KW Dual Input Universal AC/DC Power Supply |
Up to 4 Up to 8 Up to 10 |
Cisco Nexus 9504 Cisco Nexus 9508 Cisco Nexus 9516 |
Table 18. Cisco Nexus 9200 and 9300 Switches
| Cisco Nexus Switch |
Description |
| N9K-C9316D-GX |
1-RU switch with 16x400/100/40-Gbps ports. |
| N9K-C9364C-GX |
2-RU fixed-port switch with 64 100-Gigabit SFP28 ports. |
| N9K-C93600CD-GX |
1-RU fixed-port switch with 28 10/40/100-Gigabit QSFP28 ports (ports 1-28), 8 10/40/100/400-Gigabit QSFP-DD ports (ports 29-36) |
| N9K-C9364C |
2-RU Top-of-Rack switch with 64 40-/100-Gigabit QSFP28 ports and 2 1-/10-Gigabit SFP+ ports. - Ports 1 to 64 support 40/100-Gigabit speeds. - Ports 49 to 64 support MACsec encryption. Ports 65 and 66 support 1/10 Gigabit speeds. |
| N9K-C9332C |
1-RU fixed switch with 32 40/100-Gigabit QSFP28 ports and 2 fixed 1/10-Gigabit SFP+ ports. |
| N9K-C9332D-GX2B |
1-Rack-unit (1RU) spine switch with 32p 400/100-Gbps QSFP-DD ports and 2p 1/10 SFP+ ports. |
| N9k-9348D-GX2A |
48p 40/100/400-Gigabit QSFP-DD ports and 2p 1/10G/10G SFP+ ports |
| N9k-9364D-GX2A |
64p 400/100-Gigabit QSFP-DD ports and 2p 1/10 SFP+ ports |
| N9K-C93180YC-FX3 |
48 1/10/25 Gigabit Ethernet SFP28 ports (ports 1-48) 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49-54) |
| N9K-C93180YC-FX3S |
48 1/10/25 Gigabit Ethernet SFP28 ports (ports 1-48) 6 10/25/40/50/100-Gigabit QSFP28 ports (ports 49-54) |
| N9K-C9336C-FX2-E |
1- RU switch with 36 40-/100-Gb QSFP28 ports |
| N9K-C9336C-FX2 |
1-RU switch with 36 40-/100-Gb Ethernet QSFP28 ports |
| N9K-C93360YC-FX2 |
2-RU switch with 96 10-/25-Gigabit SFP28 ports and 12 40/100-Gigabit QSFP28 ports |
| N9K-C93240YC-FX2 |
1.2-RU Top-of-Rack switch with 48 10-/25-Gigabit SFP28 fiber ports and 12 40-/100-Gigabit Ethernet QSFP28 ports. |
| N9K-C93216TC-FX2 |
2-RU switch with 96 100M/1G/10G RJ45 ports, 12 40/100-Gigabit QSFP28 ports, 2 management ports (one RJ-45 and one SFP port), 1 console, port, and 1 USB port. |
| N9K-C93180YC-FX |
1-RU Top-of-Rack switch with 10-/25-/32-Gigabit Ethernet/FC ports and 6 40-/100-Gigabit QSFP28 ports. You can configure the 48 ports as 1/10/25-Gigabit Ethernet ports or as FCoE ports or as 8-/16-/32-Gigabit Fibre Channel ports. |
| N9K-C93180YC-FX-24 |
1-RU 24 1/10/25-Gigabit Ethernet SFP28 front panel ports and 6 fixed 40/100-Gigabit Ethernet QSFP28 spine-facing ports. The SFP28 ports support 1-, 10-, and 25-Gigabit Ethernet connections and 8-, 16-, and 32-Gigabit Fibre Channel connections. |
| N9K-C93108TC-FX |
1-RU Top-of-Rack switch with 48 100M/1/10GBASE-T (copper) ports and 6 40-/100-Gigabit QSFP28 ports |
| N9K-C93108TC-FX-24 |
1-RU 24 1/10GBASE-T (copper) front panel ports and 6 fixed 40/100-Gigabit Ethernet QSFP28 spine-facing ports. |
| N9K-C93108TC-FX3P |
1-RU fixed-port switch with 48 100M/1/2.5/5/10GBASE-T ports and 6 40-/100-Gigabit QSFP28 ports |
| N9K-C9348GC-FXP |
Nexus 9300 with 48p 100M/1 G, 4p 10/25 G SFP+ and 2p 100 G QSFP |
| N9K-C92348GC-X |
The Cisco Nexus 92348GC-X switch (N9K-C92348GC-X) is a 1RU switch that supports 696 Gbps of bandwidth and over 250 mpps. The 1GBASE-T downlink ports on the 92348GC-X can be configured to work as 100-Mbps, 1-Gbps ports. The 4 ports of SFP28 can be configured as 1/10/25-Gbps and the 2 ports of QSFP28 can be configured as 40- and 100-Gbps ports. The Cisco Nexus 92348GC-X is ideal for big data customers that require a Gigabit Ethernet ToR switch with local switching. |
| N9K-C93180YC-EX |
1-RU Top-of-Rack switch with 48 10-/25-Gigabit SFP28 fiber ports and 6 40-/100-Gigabit QSFP28 ports |
| N9K-C93180YC-EX-24 |
1-RU 24 1/10/25-Gigabit front panel ports and 6-port 40/100 Gigabit QSFP28 spine-facing ports |
| N9K-C93108TC-EX |
1-RU Top-of-Rack switch with 48 10GBASE-T (copper) ports and 6 40-/100-Gigabit QSFP28 ports |
| N9K-C93108TC-EX-24 |
1-RU 24 1/10GBASE-T (copper) front panel ports and 6 40/100-Gigabit QSFP28 spine facing ports. |
Table 19. Cisco Nexus 9200 and 9300 Fans and Fan Trays
| Product ID |
Description |
Quantity |
Cisco Nexus Switches |
| NXA-FAN-160CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
|
| NXA-FAN-160CFM-PI |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
9364C [1] 93360YC-FX2 |
| NXA-FAN-160CFM2-PE |
Fan module with port-side exhaust airflow (blue coloring) |
4 |
9364C-GX |
| NXA-FAN-160CFM2-PI |
Fan module with port-side intake airflow (burgundy coloring) |
4 |
9364C-GX |
| NXA-FAN-30CFM-B |
Fan module with port-side intake airflow (burgundy coloring) |
3 |
93108TC-EX |
| NXA-FAN-30CFM-F |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
93108TC-EX |
| NXA-FAN-35CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
4
6
|
92300YC [1]
9336C-FX2-E
|
| NXA-FAN-35CFM-PI |
Fan module with port-side intake airflow (burgundy coloring)
Fan module with port-side exhaust airflow (blue coloring) |
4
6
6 |
92300YC [1]
9316D-GX
9336C-FX2-E |
| NXA-FAN-65CFM-PE |
Fan module with port-side exhaust airflow (blue coloring) |
3 |
|
| NXA-FAN-65CFM-PI |
Fan module with port-side exhaust airflow (burgundy coloring) |
3 |
93240YC-FX2 |
Table 20. Cisco Nexus 9200 and 9300 Power Supplies
| Product ID |
Description |
Quantity |
Cisco Nexus Switches |
| NXA-PAC-500W-PE |
500-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93108TC-EX |
| NXA-PAC-500W-PI |
500-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93108TC-EX |
| NXA-PAC-650W-PE |
650-W power supply with port-side exhaust (blue coloring) |
2 |
92300YC |
| NXA-PAC-650W-PI |
650-W power supply with port-side intake (burgundy coloring) |
2 |
92300YC |
| NXA-PAC-750W-PE |
750-W AC power supply with port-side exhaust airflow (blue coloring) 1 |
2 |
9336C-FX2 |
| NXA-PAC-750W-PI |
750-W AC power supply with port-side intake airflow (burgundy coloring) 1 |
2 |
9336C-FX2 |
| NXA-PAC-1100W-PE2 |
1100-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
| NXA-PAC-1100W-PI2 |
1100-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
| NXA-PAC-1100W-PI |
Cisco Nexus 9000 PoE 1100W AC PS, port-side intake |
2 |
93108TC-FX3P |
| NXA-PAC-1100W-PE |
Cisco Nexus 9000 PoE 1100W AC PS, port-side exhaust |
2 |
93108TC-FX3P |
| NXA-PAC-1900W-PI |
Cisco Nexus 9000 PoE 1900W AC PS, port-side intake |
2 |
93108TC-FX3P |
| NXA-PAC-1200W-PE |
1200-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93360YC-FX2 |
| NXA-PAC-1200W-PI |
1200-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93360YC-FX2 |
| N9K-PUV-1200W |
1200-W Universal AC/DC power supply with bidirectional airflow (white coloring) |
2 |
92300YC |
| NXA-PDC-930W-PE |
930-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
93108TC-EX |
| NXA-PDC-930W-PI |
930-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
93108TC-EX |
| NXA-PDC-1100W-PE |
1100-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
| NXA-PDC-1100W-PI |
1100-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
| UCSC-PSU-930WDC |
930-W DC power supply with port-side intake (green coloring) |
2 |
93108TC-EX |
| UCS-PSU-6332-DC |
930-W DC power supply with port-side exhaust (gray coloring) |
2 |
93108TC-EX |
| NXA-PHV-1100W-PE |
1100-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
93240YC-FX2 |
| NXA-PHV-1100W-PI |
1100-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
93240YC-FX2 |
| NXA-PAC-2KW-PE |
2000-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
9364C-GX |
| NXA-PAC-2KW-PI |
2000-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
9364C-GX |
| NXA-PDC-2KW-PE |
2000-W DC power supply with port-side exhaust airflow (blue coloring |
2 |
9364C-GX |
| NXA-PDC-2KW-PI |
2000-W DC power supply with port-side intake airflow (burgundy coloring) |
2 |
9364C-GX |
| N2200-PAC-400W |
400-W AC power supply with port-side exhaust airflow (blue coloring) |
2 |
92348GC-X |
| N2200-PAC-400W-B |
400-W AC power supply with port-side intake airflow (burgundy coloring) |
2 |
92348GC-X |
| N2200-PDC-350W-B |
350-W DC power supply with port-side intake airflow |
2 |
92348GC-X |
| N2200-PDC-400W |
400-W DC power supply with port-side exhaust airflow (blue coloring) |
2 |
92348GC-X |
Fabric Module and Line Card compatibility details are listed below:
Table 21. Cisco Nexus 9500 Cloud Scale Line Cards
| Product ID |
N9K-C9504-FM-G |
N9K-C9508-FM-G |
N9K-C9504-FM-E |
N9K-C9508-FM-E |
N9K-C9508-FM-E2 |
N9K-C9516-FM-E2 |
| N9K-X9716D-GX |
4 |
4 |
No |
No |
No |
No |
| N9K-X9736C-FX |
5 |
5 |
5 |
5 |
5 |
5 |
| N9K-X97160YC-EX |
4 |
4 |
4 |
4 |
4 |
4 |
| N9K-X9788TC-FX |
4 |
4 |
4 |
4 |
4 |
4 |
| N9K-X9732C-EX |
4 |
4 |
4 |
4 |
4 |
4 |
| N9K-X9736C-EX |
4 |
4 |
4 |
4 |
4 |
4 |
| N9K-X9732C-FX |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
4 5 (n+1 redundancy) |
Table 22. Cisco Nexus 9500 R-Series Line Cards
| Product ID |
N9K-C9504-FM-R |
N9K-C9508-FM-R |
| N9K-X9636C-RX |
6 |
6 |
| N9K-X9636Q-R |
4 6 (n+2 redundancy) |
4 6 (n+2 redundancy) |
| N9K-X9636C-R |
5 6 (n+1 redundancy) |
5 6 (n+1 redundancy) |
| N9K-X96136YC-R |
6 |
6 |
Table 23. Cisco Nexus 9500 R2-Series Line Cards
| Product ID |
N9K-C9508-FM-R2 |
| N9K-X9624D-R2 |
6 |
For information about transceivers and cables supported on a switch, see the Transceiver Module (TMG) Compatibility Matrix. For the transceiver specifications and installation information, see the Install and Upgrade Guides.
Cisco Nexus Dashboard Insights for Data Center
Cisco NX-OS Release 10.3(5)M supports the Nexus Dashboard Insights on Cisco Nexus 9200, 9300-EX, 9300-FX, 9300-FX2, 9300-FX3, 9400, and 9800 platform switches and 9500 platform switches with -EX/FX/GX Line Cards. See the Cisco Nexus Insights documentation.
To perform a software upgrade or downgrade, follow the instructions in the Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide, Release 10.3(x). For information about an In Service Software Upgrade (ISSU), see the Cisco NX-OS ISSU Support Matrix.
Cisco Nexus 9000 Series documentation: Cisco Nexus 9000 Series Switches
Cisco NX-OS Software Release and Image-naming Convention: Cisco NX-OS Software Strategy and Lifecycle Guide
Cisco Nexus 9000 and 3000 Series NX-OS Switch License Navigator: Cisco Nexus 9000 and 3000 Series NX-OS Switch License Navigator
Cisco Nexus 9000 Series Software Upgrade and Downgrade Guide: Cisco Nexus 9000 Series NX-OS Software Upgrade and Downgrade Guide, Release 10.3(x).
Cisco Nexus 3000 and 9000 Series NX-API REST SDK User Guide and API Reference: Cisco Nexus NX-API Reference
Cisco NX-OS Supported MIBs: ftp://ftp.cisco.com/pub/mibs/supportlists/nexus9000/Nexus9000MIBSupportList.html
Supported FEX modules: Cisco Nexus 9000 Series Switch FEX Support Matrix
Licensing Information: Cisco NX-OS Licensing Guide and Cisco Nexus Smart Licensing Using Policy User Guide
When you downgrade from Cisco NX-OS Release 10.3(5)M to an earlier release, the features that use the ACI+NX-OS Essentials, Advantage, and add-on licenses or the Hardware Streaming Telemetry license continue to work in honor mode in the downgraded version. In addition, the output of the show license usage command continues to include entries for these unsupported licenses.
See the Cisco NX-OS Licensing Guide.
To provide technical feedback on this document, or to report an error or omission, please send your comments to nexus9k-docfeedback@cisco.com. We appreciate your feedback.
Legal Information
Cisco and the Cisco logo are trademarks or registered trademarks of Cisco and/or its affiliates in the U.S. and other countries. To view a list of Cisco trademarks, go to this URL: https://www.cisco.com/c/en/us/about/legal/trademarks.html. Third-party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company. (1721R)
Any Internet Protocol (IP) addresses and phone numbers used in this document are not intended to be actual addresses and phone numbers. Any examples, command display output, network topology diagrams, and other figures included in the document are shown for illustrative purposes only. Any use of actual IP addresses or phone numbers in illustrative content is unintentional and coincidental.
© 2024 Cisco Systems, Inc. All rights reserved.