To display the basic mapping of service flows and packet classifiers,
use the
show
interface
cable
service-flow
command. To display complete service flow configuration
information, add the
verbose keyword.
The following examples display the service flow information for the
CM that is using the primary SID of 6 and the SFID of 13:
Router# show interface cable 3/0 service-flow 13
Sfid Sid Mac Address QoS Param Index Type Dir Curr Active
Prov Adm Act State Time
13 6 00a0.73b0.4cc1 7 7 7 prim US act 12:59
Router# show interface cable 3/0 13 verbose
Sfid : 13
Mac Address : 00a0.73b0.4cc1
Type : Primary
Direction : Upstream
Current State : Active
Current QoS Indexes [Prov, Adm, Act] : [7, 7, 7]
Active Time : 13:02
Sid : 6
Traffic Priority : 0
Maximum Sustained rate : 0 bits/sec
Maximum Burst : 3044 bytes
Minimum Reserved Rate : 0 bits/sec
Admitted QoS Timeout : 200 seconds
Active QoS Timeout : 0 seconds
Packets : 13
Bytes : 1833
Rate Limit Delayed Grants : 8
Rate Limit Dropped Grants : 0
Current Throughput : 0 bits/sec, 0 packets/sec
Classifiers: NONE
The following examples display the service flow information for the
first CPE device that is using the CM, which is using the primary SID of 6.
This CPE device is using a secondary SID of 7 and the SFID of 15, and is using
the VRF configuration named
isp1.
Router# show interface cable 3/0 15
Sfid Sid Mac Address QoS Param Index Type Dir Curr Active
Prov Adm Act State Time
15 7 00a0.73b0.4cc1 8 8 8 sec(S) US act 13:33
Router# show interface cable 3/0 15 verbose
Sfid : 15
Mac Address : 00a0.73b0.4cc1
Type : Secondary(Static)
Direction : Upstream
Current State : Active
Current QoS Indexes [Prov, Adm, Act] : [8, 8, 8]
Active Time : 13:36
Sid : 7
Traffic Priority : 0
Maximum Sustained rate : 1000000 bits/sec
Maximum Burst : 65224 bytes
Minimum Reserved Rate : 0 bits/sec
Admitted QoS Timeout : 0 seconds
Active QoS Timeout : 0 seconds
Packets : 56
Bytes : 8608
Rate Limit Delayed Grants : 0
Rate Limit Dropped Grants : 0
Current Throughput : 0 bits/sec, 0 packets/sec
Classifiers:
Classifier Id : 1
Service Flow Id : 15
CM Mac Address : 00a0.73b0.4cc1
Direction : upstream
Activation State : active
Classifier Matching Priority : 0
PHSI : 0
Number of matches : -
Ethernet/LLC Classifier Parameters :
Source MAC : 0000.0CA1.B2C3
The following example displays the service flow information for the
second CPE device that is using the CM, which is using the primary SID of 6.
This CPE device is using a secondary SID of 8 and the SFID of 16, and is using
the VRF configuration named
isp2.
Router# show interface cable 3/0 service-flow 16
Sfid Sid Mac Address QoS Param Index Type Dir Curr Active
Prov Adm Act State Time
16 8 00a0.73b0.4cc1 8 8 8 sec(S) US act 14:04
Router# show interface cable 3/0 service-flow 16 verbose
Sfid : 16
Mac Address : 00a0.73b0.4cc1
Type : Secondary(Static)
Direction : Upstream
Current State : Active
Current QoS Indexes [Prov, Adm, Act] : [8, 8, 8]
Active Time : 14:08
Sid : 8
Traffic Priority : 0
Maximum Sustained rate : 1000000 bits/sec
Maximum Burst : 65224 bytes
Minimum Reserved Rate : 0 bits/sec
Admitted QoS Timeout : 0 seconds
Active QoS Timeout : 0 seconds
Packets : 155
Bytes : 20418
Rate Limit Delayed Grants : 0
Rate Limit Dropped Grants : 0
Current Throughput : 0 bits/sec, 0 packets/sec
Classifiers:
Classifier Id : 2
Service Flow Id : 16
CM Mac Address : 00a0.73b0.4cc1
Direction : upstream
Activation State : active
Classifier Matching Priority : 0
PHSI : 0
Number of matches : -
Ethernet/LLC Classifier Parameters :
Source MAC : 0000.0CA1.B2D4
The following example displays the service flow information for the
third CPE device that is using the CM, which is using the primary SID of 6.
This CPE device is using a secondary SID of 9 and the SFID of 17, and is using
the VRF configuration named
isp3.
Router# show interface cable 3/0 service-flow 17
Sfid Sid Mac Address QoS Param Index Type Dir Curr Active
Prov Adm Act State Time
17 9 00a0.73b0.4cc1 8 8 8 sec(S) US act 14:33
Router# show interface cable 3/0 service-flow 17 verbose
Sfid : 17
Mac Address : 00a0.73b0.4cc1
Type : Secondary(Static)
Direction : Upstream
Current State : Active
Current QoS Indexes [Prov, Adm, Act] : [8, 8, 8]
Active Time : 14:36
Sid : 9
Traffic Priority : 0
Maximum Sustained rate : 1000000 bits/sec
Maximum Burst : 65224 bytes
Minimum Reserved Rate : 0 bits/sec
Admitted QoS Timeout : 0 seconds
Active QoS Timeout : 0 seconds
Packets : 141
Bytes : 16152
Rate Limit Delayed Grants : 0
Rate Limit Dropped Grants : 0
Current Throughput : 33 bits/sec, 0 packets/sec
Classifiers:
Classifier Id : 3
Service Flow Id : 17
CM Mac Address : 00a0.73b0.4cc1
Direction : upstream
Activation State : active
Classifier Matching Priority : 0
PHSI : 0
Number of matches : -
Ethernet/LLC Classifier Parameters :
Source MAC : 0000.0CA1.B2E5
The following example displays the service flow information for a
dynamically generated PacketCable service flow on the modem with a primary SID
of 6. The dynamic service flow is using a secondary SID of 10 and an SFID of
18, and is using the VRF configuration named isp2.
Router# show interface cable 3/0 service-flow 18 verbose
Sfid : 18
Mac Address : 00a0.73b0.4cc1
Type : Secondary(Dynamic)
Direction : Upstream
Current State : Active
Current QoS Indexes [Prov, Adm, Act] : [0, 5, 5]
Active Time : 02:59
Sid : 10
Admitted QoS Timeout : 200 seconds
Active QoS Timeout : 0 seconds
Packets : 8967
Bytes : 2080344
Rate Limit Delayed Grants : 0
Rate Limit Dropped Grants : 0
Current Throughput : 92399 bits/sec, 49 packets/sec
Classifiers:
Classifier Id : 1
Service Flow Id : 18
CM Mac Address : 00a0.73b0.4cc1
Direction : upstream
Activation State : active
Classifier Matching Priority : 64
PHSI : 0
Number of matches : -
IP Classification Parameters :
IP Source Address : 4.22.96.99
Source IP Address Mask : 255.255.255.255
Destination IP Address : 4.18.39.12
Destination IP Address Mask : 255.255.255.255
IP Protocol Type : 17
Source Port Low : 16622
Source Port High : 16622
Destination Port Low : 17640
Destination Port High : 17640