E1 PRI Troubleshooting Flowchart

Available Languages

Download Options

  • PDF     (25.1 KB)
    View with Adobe Reader on a variety of devices
Updated:November 14, 2005
Document ID:14164

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Introduction

This document shows the E1 PRI troubleshooting flowchart.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

This document is not restricted to specific software and hardware versions.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Flowchart

In order to view more infomation, click the command boxes. Click the infomation in red to go to the next flow chart.

e1_flchrt_pri.gif

Related Information

Revision History

Revision Publish Date Comments
1.0
14-Nov-2005
Initial Release

Was this Document Helpful?

FeedbackFeedback

Contact Cisco

This Document Applies to These Products