Note: This document is part of a set of documents that explain how to determine which Cisco Unity installation option is correct for your network. These documents also explain how to install the correct Cisco Unity option in your network. These documents are intended to be used for new Cisco Unity installations only. If you need to upgrade or change an existing Cisco Unity configuration, refer to the correct online product documentation for Cisco Unity.
Note: These documents do not explain how to integrate your Cisco Unity server with your phone system or how to configure your Cisco Unity server. Once you complete the initial Cisco Unity installation, you are referred to the online product documentation for further instructions. Refer to the Next Steps section on the Index page.
Note: This document set is written for networks that run a Windows 2000 server.
Note: Return to the Index page for this documentation set.
This document explains the the process you use to acquire an activation code for Cisco Unity license keys.
This document addresses a new installation and not an upgrade.
The information in this document is based on these software and hardware versions.
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.
For more information on document conventions, refer to the Cisco Technical Tips Conventions.
You need these items during the installation of the Cisco Unity system:
Cisco Unity Activation Code (unless you install a demonstration system).
Cisco Unity System Key (Parallel port or USB port).
Voice cards (only for an integration with a circuit-switched phone system, and the related cables, line splitters, and adapters).
Cisco Unity 3.1(6) installation CDs: Program CD, Service Pack CDs, Data Store CD, Message Store CD, Additional Languages CDs (optional), Remote Support CD (optional), and IE 5.5 CD.
A customer provided copy of Exchange (Message Store) if Unified messaging is configured.
A customer provided copy of the Windows 2000 Server CD if a Component System is used.
A customer provided server if a Component System that meets the requirements listed in Cisco Unity 3.1 System Requirements, and Supported Hardware and Software is used.
You must have an activation code for the system key in order to complete the Cisco Unity installation or upgrade. In order to set up Fail Over, you must have two activation codes, one for each Cisco Unity server.
Cisco sends you an E-mail with the code which activates license settings once the Cisco Unity software is registered on Cisco.com.
A registration notice shipped with Cisco Unity contains instructions on how to register the software. The E-mail from Cisco instructs the recipient to save the code to a blank disk labeled "Cisco Unity Activation Code" and to store the disk with the Cisco Unity software and documentation.
If the Cisco Unity software is not registered, do so immediately. It can take up to one business day to receive the activation code for the system key. Refer to Registering Cisco Unity for instructions on how to register the software, or on how to get another copy of the activation code if it is misplaced.
The Cisco Unity system key is shipped with a minimal number of settings. In order to activate the system key so that it includes the settings that you purchased, you must register the Cisco Unity software on Cisco.com.
Within one business day of registration, you receive an E-mail with a Cisco Unity activation code.
Registrations are processed only during regular business hours.
Caution: You cannot complete the Cisco Unity installation without a Cisco Unity activation code.
Use this procedure in order to register Cisco Unity on Cisco.com:
Browse to the software registration site: https://tools.cisco.com/SWIFT/LicensingUI/Home (registered customers only) .
In the Voice Products/Cisco Unity Software section, click the applicable registration link.
Enter the requested information and submit the form.
Within one business day of registration, you receive an e-mail with the Cisco Unity activation code. If the Cisco Unity activation code is misplaced or lost, it can take up to one business day to get another copy.
Use this procedure in order to receive another copy of the activation code.
Call Cisco Technical Support and ask for the Acquisitions and Special Handling Team:
| In the U.S.
|| 800 553 NETS (6387)
| Outside the U.S.
|| For your local Technical Support phone number, refer to the Technical Support directory.
Provide the appropriate information in order to verify Cisco Unity ownership.
For example, the purchase order number, the serial number on the system key, or the product authorization key in the Cisco Unity compact disc wallet.
Return to the Index page for this documentation set.