The Cisco Unity Uninstall tool automatically runs when a user tries to
run another Cisco Unity application. This document describes how to
troubleshoot this issue.
There are no specific requirements for this document.
The information in this document is based on Cisco Unity.
The information in this document was created from the devices in a
specific lab environment. All of the devices used in this document started with
a cleared (default) configuration. If your network is live, make sure that you
understand the potential impact of any command.
Technical Tips Conventions for more information on document
Cisco Unity automatically runs the Cisco Unity Uninstall utility tool
when a user tries to run some other application on that server.
This issue occurs if the Cisco Unity Uninstall utility is installed on
The Cisco Unity Uninstall utility tool is required only when a user
needs to uninstall the Cisco Unity application from the server.
You can uninstall the Cisco Unity Uninstall utility in order to resolve
this issue. Complete these steps:
On the Microsoft Windows Start menu, click
Settings > Control Panel >
Remove Cisco Unity Uninstall