Guest

Cisco Unity

Change Cisco CallManager IP Address in Cisco Unity Integration

Document ID: 107271

Updated: May 25, 2008

   Print

Introduction

This document explains how to change the Cisco CallManager IP address with which the Cisco Unity is integrated. This needs to be done if you migrate the IP address of a Cisco CallManager with an existing Cisco Unity integration and needs to continue with the same integration.

Prerequisites

Requirements

Cisco recommends that you have knowledge of these topics:

  • Cisco Unity

Components Used

The information in this document is based on the Cisco Unity 4.x.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

Refer to Cisco Technical Tips Conventions for more information on document conventions.

Change Server IP Address

You need to change the IP address of the Cisco CallManager through the Cisco Unity Telephony Integration Manager (UTIM).

Cisco Unity Telephone Integration Manager

Complete these steps in order to update the new Cisco CallManager IP address on the integration settings, on Cisco Unity:

  1. Choose Start > Programs > Unity > Cisco Unity Tools Depot.

    change-cmm-ip-01.gif

  2. Choose Switch Integration Tools and double-click on Telephone Integration Manager, which opens the UTIM.

    change-cmm-ip-02.gif

  3. Click Modify and change the IP address with the new Cisco CallManager server.

    change-cmm-ip-03.gif

    Click Save in order to save the changes in the Cisco Unity Telephony integration.

Related Information

Updated: May 25, 2008
Document ID: 107271