This document explains how to configure feature keys such as Call Park,
Call Pickup, and Transfer on the Cisco 7910 or other Cisco IP Phone.
There are no specific requirements for this document.
The information in this document is based on these software and
The information in this document was created from the devices in a
specific lab environment. All of the devices used in this document started with
a cleared (default) configuration. If your network is live, make sure that you
understand the potential impact of any command.
For more information on document conventions, refer to the
Technical Tips Conventions.
In order to add feature keys to the Cisco 7910 (or other IP Phone) you
need to create a custom template based upon the default phone template. In this
case a Cisco 7910.
From Cisco CallManager Administration, select Device
> Phone Button Template.
Note: Cisco CallManager 4.x, the navigation is Device
> Device Setting > Phone Button
Choose Default 7910 as the template from the
drop-down menu and click Copy.
Provide a name for the new template. In this case, Example
7910. Once you have created the new template, you can choose the
feature keys that meet your requirements and click Insert.
In the Phone Configuration page, select the new template you just
created from the Phone Button Template* drop-down menu. Click Reset
Phone in order to have the phone use the new template.