Guest

Cisco Unified Communications Manager (CallManager)

How to Get the ICD Extension to Appear on the User Page Using CallManager 3.3

Document ID: 13956

Updated: Jun 14, 2005

   Print

Introduction

This procedure adds the ICD Extension field to the User pages on the Cisco CallManager Administration web page.

Prerequisites

Requirements

There are no specific requirements for this document.

Components Used

The information in this document is based on Cisco CallManager 3.3.

The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, make sure that you understand the potential impact of any command.

Conventions

For more information on document conventions, refer to the Cisco Technical Tips Conventions.

Getting the ICD Extension to Appear

In order to get the ICD Extension field to appear on the User pages of the Cisco CallManager Administration web page, follow the steps in these sections.

Changing the IAQ Flag in DC Directory

These steps describe how to change the IAQ Flag.

  1. Choose Start > Programs > DC Directory Administrator to open the DC Directory Administrator.

    icd_ext_01.gif

  2. Click Next.

  3. Enter the User Name Directory Manager and the password ciscocisco and click Finish.

    icd_ext_02.gif

  4. Once you have logged in, expand Directory > cisco.com > CCN > systemProfile.

  5. In the right area of the window, under Directory Name, right-click System Profile and select Properties.

    icd_ext_03.gif

  6. In the System Profile dialog box, click the Application Install Status tab and then click the Modify button.

    The fields change from grey (dimmed) to white (editable).

    icd_ext_04.gif

  7. Change the IAQ Flag field from false to true.

    icd_ext_05.gif

  8. Click Apply and then click OK.

Restarting the IIS Admin Service and World Wide Web Publishing Service

These steps describe how to restart the IIS Admin Service.

  1. Choose Start > Programs > Administrative Tools > Services.

    icd_ext_06.gif

  2. Select the IIS Admin Service and click the Restart Service button at the top right of the menu bar.

    icd_ext_07.gif

  3. When you are prompted to restart the World Wide Web Publishing Service, click Yes.

    Both services will stop and then restart.

    icd_ext_08.gif

Verify

This section provides information that you can use to confirm that your configuration is working properly.

  1. On the Cisco CallManager Administration menu, choose User > Global Directory.

    icd_ext_09.gif

  2. Select a user to whom you want to give an ICD extension.

  3. On the User Configuration page, in the left area, click Device Association.

    icd_ext_10.gif

  4. On the Device Association Page, you will now see the radio button for ICD Ext.

    icd_ext_11.gif

Troubleshoot

If the ICD Extension field does not appear after you follow the procedures in this document, ensure that the FTP Publishing Service, the World Wide Web Publishing Service, and the IIS Admin Services are running.

Related Information

Updated: Jun 14, 2005
Document ID: 13956