Guest

Cisco SPA232D Multi-Line DECT ATA

Video Data Sheet

Video Data Sheet

Get clear, high-quality, voice over IP for on-premise mobility. (3:25 min)

Affordable, Clear, and Flexible Voice over IP

The Cisco SPA232D Multi-Line DECT ATA can enable small businesses, home offices, and residential environments to take advantage of high-quality, comprehensive voice over IP (VoIP) service using broadband Internet connections. On-premise mobile employees can remain in touch using support from its integrated Digital Equipment Cordless Telephony (DECT) base station.

Features and Capabilities

The Cisco SPA232D Multi-Line DECT ATA connects a standard analog telephone or fax machine to an IP-based data network. VoIP service providers can then offer business and residential users traditional and enhanced communication services using the subscriber's broadband connection to the Internet.

An inexpensive and easy-to-use solution that is installed by the end user, the Cisco SPA 232D Multi-Line DECT ATA is remotely provisioned, configured, and maintained by the service provider. Each SPA232D Multi-Line DECT ATA converts voice traffic into data packets for transmission over an IP network.

For Consumer and Business Use

Compact in design, the Cisco SPA232D can be used both in consumer and business VoIP service offerings, including full-featured hosted service environments. The Cisco SPA232D uses international standards for voice and data networking for reliable voice and fax operation.

The Cisco SPA232D Multi-Line DECT ATA also supports the new Cisco SPA302D DECT Handset , providing a reliable and cost-effective mobility solution for employees who must always be reachable, while typically on the move, whether at home or on-premise.

With the Cisco SPA232D, customers are able to protect and extend their investment in their existing analog telephones, conference speakerphones, and fax machines with an extremely affordable and reliable solution.

Features:

  • One port to connect an existing analog phone or fax machine; one port to connect to a third-party PBX circuit
  • Two 100 BaseT RJ-45 Ethernet interfaces for connections to a home or office LAN and an Ethernet connection
  • FXS and FXO lines that can be independently configured using software controlled by a service provider or end user
  • Highly secure encryption-based methods for communication, provisioning, and servicing
  • Integrated DECT base station supports SPA302D DECT Handset, helping users remain in touch while mobile

Benefits:

  • Helps enable high-quality, comprehensive VoIP service through your broadband Internet connection
  • Phone ports route local calls from mobile phones and land lines over to VoIP service providers and vice versa
  • High-quality, clear-sounding voice, using advanced voice quality of service (QoS) capability
  • Compatible with all common telephone features, such as caller ID, call waiting, and voicemail
  • Cost-effective on-premise mobility with an Integrated DECT Base Station configurable with up to 10 phone numbers

Specifications at a Glance

Voice Gateway

  • Session Initiation Protocol (SIP) v2 (RFC 3261, 3262, 3263, 3264)
  • SIP proxy redundancy - dynamic using DNS SRV A records
  • Re-registration with primary SIP proxy server
  • SIP support in network address translation (NAT) networks (including Serial Tunnel [STUN])
  • Highly secure (encrypted) calling using Secure RTP
  • SIP proxy redundancy - dynamic using DNS SRV A records
  • Codec name assignment: G.711 (A-law and µ-law), G.726 (32 kbps), G.729 A
  • Dynamic payload
  • Adjustable audio frames per packet
  • Dual-tone multifrequency (DTMF): in-band and out-of-band (RFC 2833)

DECT

  • 1910 MHz to 1930 MHz (SPA232D-G1)
  • 1880 MHz to 1920 MHz (SPA232D-G7)

Additional Resources

Video Data Sheet

Viewing this video requires Adobe Flash Player 8 with JavaScript enabled.

Get the Flash Player

Let Us Help