Guest

Cisco Aironet 1250 Series

Cisco Aironet 1250 Series Ordering Guide

  • Viewing Options

  • PDF (103.4 KB)
  • Feedback
The Cisco ® Aironet ® 1250 Series is an enterprise-class 802.11n access point designed for challenging RF environments. A dual-band rugged indoor access point, the 1250 Series provides reliable and predictable WLAN coverage with data rates of up to 600 Mbps. With a choice of 2.4-GHz and 5-GHz radio modules, the 1250 Series may be ordered as follows:

• Access point platform with pre-installed radio modules: Includes the 1250 Access Point platform with pre-installed 2.4- and 5-GHz radio modules, or only a 2.4-GHz radio module. The combination of radio modules is determined by the part number.

• Individual components: The access point platform (no radio modules) and radio modules are separately orderable as spares.

Pre-installed Radio Modules

Table 1 lists the part numbers for the Cisco Aironet 1250 Series access point platform with pre-installed radio modules. Each part number corresponds to a specific combination of the Cisco Aironet 1250 Series access point platform and one or two radio modules. Access points ordered in this manner arrive with the radio modules installed in the access point platform. Customers are responsible for verifying approval for use in their individual countries. To verify approval and to identify the regulatory domain that corresponds to a particular country, please visit http://www.cisco.com/go/aironet/compliance.

Table 1. Cisco Aironet 1250 Series with Pre-installed Radio Modules

Part Number

Description

Access Point Platform

Radio Modules

Regulatory Domain

AIR-AP1252AG-x-K9

AIR-LAP1252AG-x-K9

802.11a/g/n- 2.4/5-GHz Mod Auto AP; 6 RP-TNC

802.11a/g/n- 2.4/5-GHz Unified AP; 6 RP-TNC)

AIR-AP1250

AIR-RM1252A-x-K9

and

AIR-RM1252G-A-K9

x=

• A = FCC
• C = China
• E = ETSI
• I = Middle East
• K = Korea
• N = Non-FCC
• P = Japan2
• S = Singapore
• T = Taiwan

AIR-AP1252G-x-K9

AIR-LAP1252G-x-K9

802.11g/n- 2.4 GHz Autonomous AP; 3 RP-TNC

802.11g/n- 2.4 GHz Unified AP; 3 RP-TNC

AIR-AP1250

AIR-RM1252G-A-K9

x=

• A = FCC
• E = ETSI
• P = Japan2

Cisco Aironet 1250 Series access point platforms with pre-installed radio modules ship with the following:

• Cisco Aironet 1250 Series access point and radio module(s)

• Mounting hardware kit

– One mounting plate, two 4 x 40 x 3/16 in screws, and a mounting plate latch (all attached to the access point)

– Two suspended ceiling T-rail clips, spacers (accommodates standard and recessed T-rails), and nuts

– Four 8 x 18 x 3/4 in pan head Phillips sheet metal screws

– Four #8 plastic wall anchors

– One 10 x 24 nut (for ground stud on the mounting plate)

– Two cable tie wraps

• Product quick start guide

• Translated safety warning document for the product

• Cisco product registration card

An external AC power supply and power cord does not ship standard with Cisco Aironet 1250 Series Access Point. An optional external AC power supply is available, but is required only if AC power will be used to power the access point. The external AC power supply is not needed if the AIR-PWRINJ4 power injector is used to power the access point; the injector has its own integrated AC power supply. Refer to the section "Power Options" for additional details.
In addition to the standard contents listed above, there are several options available in the Cisco Configuration Tool that may be ordered in conjunction with the access point. These options are show in Table 2 below.

Table 2. Configuration Options for the Cisco Aironet 1250 Series with Pre-installed Radio Modules

Configuration Option

Selections

Description/Notes

2.4-GHz Antenna Options

• None*
• AIR-ANT2422DG-R
• AIR-ANT2422DB-R
• AIR-ANT2422DW-R
• No 2.4-GHz antenna
• Three 2.4-GHz 2.2 dBi Gray Straight Dipole Ant RP-TNC
• Three 2.4-GHz 2.2 dBi Black Dipole Antenna RP-TNC
• Three 2.4-GHz 2.2 dBi White Dipole Antenna RP-TNC

Note: Additional antennas are available for the AP1250 as separately orderable spares. See the "Antennas" section below.

5-GHz Antenna Options

(Only available for part numbers with 5 GHz radios)

• None*
• AIR-ANT5135DG-R
• AIR-ANT5135DB-R
• AIR-ANT5135DW-R
• No 5-GHz antenna
• Three 5-GHz 3.5 dBi Gray Straight Dipole Ant RP-TNC
• Three 5-GHz 3.5 dBi Black Dipole Antenna RP-TNC
• Three 5-GHz 3.5 dBi White Dipole Antenna RP-TNC

Note: Additional antennas are available for the AP1250 as separately orderable spares. See the "Antennas" section below.

Power Option

• AIR-PWRINJ4
• AIR-PWR-SPLY1
• AIR-NO-PWR-SPPLY
• Power Injector for the Cisco Aironet 1250 Series
• Power Supply for the Cisco Aironet 1250 Series
• Do not ship a power supply

Country Power Cord Opts

• None Selected
• AIR-PWR-CORD-SW
• AIR-PWR-CORD-SA
• AIR-PWR-CORD-IS
• AIR-PWR-CORD-DM
• AIR-PWR-CORD-CH
• AIR-PWR-CORD-AP
• AIR-PWR-CORD-AR
• AIR-PWR-CORD-AU
• AIR-PWR-CORD-CE
• AIR-PWR-CORD-IT
• AIR-PWR-CORD-JP
• AIR-PWR-CORD-NA**
• AIR-PWR-CORD-UK
• AIR Line Cord Switzerland
• AIR Line Cord South Africa
• AIR Line Cord Israel
• AIR Line Cord Denmark
• AIR Line Cord Main
• AIR Line Cord Asia Pacific
• AIR Line Cord Argentina/Uruguay
• AIR Line Cord Australia
• AIR Line Cord Central Europe
• AIR Line Cord Italy
• AIR Line Cord Japan
• AIR Line Cord North America
• AIR Line Cord United Kingdom

AIR Software Option for AP1250

• Autonomous
• Unified (LWAPP)

The software version number will vary over time as new software versions are released.

Console Cable Option

• None Selected*
• AIR-CONCAB1200
• No console cable
• Console Cable for 1130AG, 1200, 1230AG, 1240AG, 1250 Series

* Default selection
** Default selection for all AP1250 products in the -A regulatory domain
Configurable options will ship in the same box as the access point. Additional AP1250 Series antennas and accessories are also available and may be ordered separately as spares.

Cisco Aironet 1250 Series Eco-Pack

Cisco Aironet 1250 Series Eco-Packs ship with 5 access points and are designed to reduce product packaging and preserve the environment (Table 3). Note that power supplies and power cords are not included with the eco-pack. For customers who require local power, power supplies and power cords need to be ordered as separate line items.

Table 3. Cisco Aironet 1250 Series Eco-Pack SKUs and Regulatory Domains

Part Number

Product Description

AIR-LAP1252-A-K9-5

802.11a/g/n 2.4/5 GHz Unified AP, FCC, 5 APs

AIR-LAP1252-E-K9-5

802.11a/g/n 2.4/5 GHz Unified AP, ETSI, 5 APs

AIR-LAP1252-N-K9-5

802.11a/g/n 2.4/5 GHz Unified AP, Non-FCC, 5 APs

AIR-AP1252-N-K9-5

802.11a/g/n 2.4/5 GHz Autonomous AP, Non-FCC, 5 APs

Individual Components

Table 4 lists the available spare part numbers for the Cisco Aironet 1250 Series access point platform and individual radio modules. Spares are not configurable.

Table 4. Cisco Aironet 1250 Series Part Numbers for Spares

Part Number

Description

Regulatory Domain

AIR-AP1250=

Autonomous AP Platform (no radio modules); Spare

Not applicable

AIR-LAP1250=

Unified AP Platform (no radio modules); Spare

Not applicable

AIR-AP1250MNTGKIT=

1250 Series Ceiling, Wall Mount Bracket kit; Spare

Not applicable

AIR-RM1252A-x-K9=

802.11a/n 5-GHz Radio Module; 3 RP-TNC; Spare

x=

• A = FCC
• C = China
• E = ETSI
• I = Middle East
• K = Korea
• N = Non-FCC
• P = Japan2
• S = Singapore
• T = Taiwan

AIR-RM1252G-A-K9=

802.11g/n 2.4-GHz Radio Module; 3 RP-TNC; Spare

x=

• A = FCC
• E = ETSI
• P = Japan2

Regulatory Domains

Regulatory domains are used to distinguish groups of countries that adhere to the same or similar regulations for radio usage with regards to available channels and transmit power. Cisco Aironet radio products are set at the factory to allow a particular channel set and maximum transmit power; this is reflected in the part number as the single character following the model number (for example, in AIR-LAP1252AG-A-K9, the regulatory domain is represented by "-A"). Customers must select the regulatory domain that corresponds to their particular country when ordering an Aironet 1250 with pre-installed radio modules or spare radio modules.
Cisco Aironet 1250 Series access points are certified for use in many countries around the world, but have not been approved for use in all countries. For current worldwide approval status of Cisco Aironet 1250 Series access points, visit http://www.cisco.com/application/pdf/en/us/guest/products/ps5861/c1650/cdccont_0900aecd80537b6a.pdf. Note that because regulatory requirements change frequently, the version applicable for your country may have changed from previous-generation Cisco Aironet products.

Antennas

Each radio module for the Cisco Aironet 1250 Series requires external antennas, which must be ordered as a configurable option or separately as spares. The number of antennas each access point or radio module supports is included in the Global Price List description (for example, 3 RP-TNC).
Table 5 contains a list of the antennas that may be used with the Cisco Aironet 1250 Series. Additional antennas are also available as described in the Cisco Aironet 2.4-GHz and 5-GHz Antennas and Accessories Data Sheet or the Antenna Product Portfolio for Cisco Aironet 1250 Series Access Points At-A-Glance. Note that Cisco Aironet 1250 Series Access Points are certified for operation only with Cisco Aironet antennas; to ensure regulatory compliance, select Cisco Aironet antennas for use with Cisco 1250 Series Access Points.

Table 5. Cisco Aironet 1250 Series Antenna Part Numbers for Spares

Frequency

Part Number

Antenna Type

Antenna Gain (dBi)

2.4GHz

AIR-ANT5959

Diversity Ceiling Omni

2

AIR-ANT2422DG-R

Grey Non-Articulating Dipole

2.2

AIR-ANT4941

Black Articulating Dipole

2.2

AIR-ANT2430V-R

Three Element Omni Antenna

3

AIR-ANT1728

Ceiling Mount Omni

5.2

AIR-ANT2506

Mast Mount Omni

5.2

AIR-ANT2452V-R

Diversity Pillar Omni

5.2

AIR-ANT2460P-R

Patch

6

AIR-ANT2465P-R

Diversity Patch

6.5

AIR-ANT2485P-R

Patch

6

AIR-ANT2410Y-R

Yagi

10

5GHz

AIR-ANT5135DG-R

Grey Non-Articulating Dipole

3.5

AIR-ANT5135D-R

Black Articulating Dipole

3.5

AIR-ANT5140V-R

Three Element Omni Antenna

4

AIR-ANT5145V-R

Diversity Omni-Directional

4.5

AIR-ANT5160V-R

Omni-Directional

6

For more information on antenna options, visit http://www.cisco.com/en/US/products/hw/wireless/ps469/index.html.

Power Options

The Cisco Aironet 1250 Series Access Point may be powered by a Cisco Ethernet switch, a power injector, or a local power supply.
Caution: The Aironet 1250 Series Access Point with two RM1252 radio modules installed requires greater than the 12.95W allowed for by the 802.3af standard. Certain Cisco Ethernet switches are capable of providing this greater amount of power and can fully power the Aironet 1250 Series Access Point with two RM1252 radio modules installed. Refer to the Aironet 1250 Series Access Point data sheet for further details.
Caution: An external AC power supply and power cord does not ship with the Cisco Aironet 1250 Series. If one is required, it can be configured when the access point is ordered, or ordered as a spare.
If an Ethernet switch with Power over Ethernet is not being used, the power injector or power supply must be ordered either as a configurable option or as a spare. If ordered as a configurable option, the power injector or power supply will ship in the same box as the access point. Power options may also be ordered separately as spares as shown in Table 6.

Table 6. Cisco Aironet 1250 Series Power Option Part Numbers for Spares

Part number

Product Description

AIR-PWRINJ4=

Power Injector-1250 Series; Spare

AIR-PWR-SPLY1=

Power Supply-1250 Series; Spare

The following powering options are not supported by the Aironet 1250 Series Access Point:

• Cisco PoE (6W)

• Cisco PoE (13W)

• Cisco mid-span

• AIR-PWR-A

• PWRINJ-FIB

• PWRINJ3

• AIR-PWRINJ1500

Software

The Cisco Aironet 1250 Series can be ordered with Cisco IOS ® Software to operate as a standalone (autonomous) access point or with the Lightweight Access Point Protocol (LWAPP) software to operate as part of the Cisco Unified Wireless Network. To gain the full breadth of mobility services, the Cisco Aironet 1250 Series should be deployed with LWAPP, requiring a connection to a WLAN controller.

Console Cable

The Cisco Aironet 1250 Series can be configured and monitored using the console port. A console cable does not ship by default with the access point. When you order the access point with pre-installed radio modules, the console cable is available as a configurable option. If ordered as a configurable option, the console cable will ship in the same box as the access point. The console cable may also be ordered separately as a spare (Table 7).

Table 7. Cisco Aironet 1250 Series Console Cable Part Number

Part Number

Product Description

AIR-CONCAB1200=

Cisco Aironet 1130AG, 1200, 1230, 1240 and 1250 Series Console Cable

Mounting Kit

The Cisco Aironet 1250 Series Access Point ships standard with a mounting bracket and hardware. A spare mounting kit may be purchased separately (Table 8).

Table 8. Cisco Aironet 1250 Series Mounting Bracket Part Number

Part Number

Product Description

AIR-AP1250MNTGKIT=

AP1250 Access Point Ceiling/Wall Mount Bracket Kit, spare