Guest

Cisco Physical Access Gateways

Cisco Physical Access Output Module

  • Viewing Options

  • PDF (83.2 KB)
  • Feedback

The Cisco® Physical Access Output Module (Figure 1) is an optional module that can be connected to the Cisco Physical Access Gateway to expand the solution to include additional outputs.

The Cisco Physical Access Output Module can connect up to 8 outputs, each of which can be configured as Normally Open (NO) or Normally Closed (NC). The module must be used in conjunction with a Cisco Physical Access Gateway, and cannot be used standalone.

Figure 1. Cisco Physical Access Output Module

Connectors

Table 1 describes the connectivity and connectors of the Cisco Physical Output Module.

Table 1. Cisco Physical Access Output Module Connectors

Connector

Description

Outputs

Eight Form C relay outputs, with contacts rated 5A @ 30V DC or 125VAC (resistive). Each can be configured as either Normally Closed (NC) or Normally Open (NO).

Tamper Input

Unsupervised input; raises a "tamper" alarm when activated. Can be repurposed for general use by software configuration.

Power Fail Input

Unsupervised input; raises a "power fail" alarm when activated. Can be repurposed for general use by software configuration.

Power

2-pin connector for connecting a 12 to 24 VDC external power source.

CAN Bus

A 3-wire connection is used to connect to the controller area network (CAN) bus.

CAN Termination

A switch allows for the CAN bus to be terminated. This is needed for the last module on the CAN bus.

Specifications

Table 2 provides specifications of the Cisco Physical Access Output Module.

Table 2. Cisco Physical Access Output Module Mechanical Specifications

Item

Description

Housing

Aluminum

Dimensions (LxWxH)

• 5 x 7 x 1.46 in.
• 127 x 178 x 37 mm

Weight

Without Plugs and Brackets

With Plugs

With Brackets

With Plugs and Brackets

1.43 lb (648 g)

1.53 lb ( 716 g)

1.59 lb ( 722 g)

1.69 lb ( 790 g)

Certifications

• FCC
• UL
• CE

Operating Temperature

• Indoors only
• 32 to 122°F (0 to 50°C)

Humidity

5 to 95% relative, non-condensing

Power

12 to 24 VDC (+/- 10%) through an external power supply

Package Contents

Table 3 describes the items that ship with the Cisco Physical Access Output Module.

Table 3. Package Contents

Item

Cisco Physical Access Output Module

Connector plugs

Pin

Qty

3

9

2

3

2 mounting brackets, with 4 screws for each bracket

Regulatory compliance and safety information

Quick start guide

Availability

The Cisco Physical Access Input Module is available through Cisco Authorized Technology Provider (ATP) Partners.

Ordering Information

Table 4 lists the part numbers for the Cisco Physical Output Module.

Table 4. Ordering Information

Part Number

Description

CIAC-GW-OP8

Cisco Physical Access Output Module

Service and Support

Cisco offers a wide range of services programs to accelerate customer success. These innovative programs are delivered through a unique combination of people, processes, tools, and partners, resulting in high levels of customer satisfaction. Cisco services help you to protect your network investment, optimize network operations, and prepare your network for new applications to extend network intelligence and the power of your business. For more information about Cisco services, visit Cisco Technical Support Services or Cisco Advanced Services.

For More Information

For more information about the Cisco Physical Access Output Module, visit http://www.cisco.com/go/eac or contact your local account representative.
Text Box: Printed in USA	C78-464246-00   04/08