配置APIC从6.0(2H)自动升级

下载选项

  • PDF     (1.2 MB)
    在各种设备上使用 Adobe Reader 查看
  • ePub     (922.5 KB)
    在 iPhone、iPad、Android、Sony Reader 或 Windows Phone 上使用各种应用查看
  • Mobi (Kindle)     (769.4 KB)
    在 Kindle 设备上查看或在多个设备上使用 Kindle 应用查看
已更新: 2024 年 7 月 8 日
文档 ID:222105

非歧视性语言

此产品的文档集力求使用非歧视性语言。在本文档集中，非歧视性语言是指不隐含针对年龄、残障、性别、种族身份、族群身份、性取向、社会经济地位和交叉性的歧视的语言。由于产品软件的用户界面中使用的硬编码语言、基于 RFP 文档使用的语言或引用的第三方产品使用的语言，文档中可能无法确保完全使用非歧视性语言。 深入了解思科如何使用包容性语言。

关于此翻译

思科采用人工翻译与机器翻译相结合的方式将此文档翻译成不同语言，希望全球的用户都能通过各自的语言得到支持性的内容。 请注意：即使是最好的机器翻译，其准确度也不及专业翻译人员的水平。 Cisco Systems, Inc. 对于翻译的准确性不承担任何责任，并建议您总是参考英文原始文档（已提供链接）。

    简介

    本文档介绍自动升级功能如何用于思科应用策略基础设施控制器(APIC)。

    何时需要它？

    在现有流程中，无论何时通过退货许可(RMA)收到新的APIC还是新采购的APIC，都必须运行与ACI交换矩阵中相同的APIC版本才能加入集群。这要求先升级新的APIC以匹配现有集群的版本，然后再将其添加到交换矩阵，这需要花费大量时间并需要手动操作。

    当您需要此功能时，有两个使用案例。

    1. 更换故障APIC(RMA APIC)
    2. APIC集群扩展

    先决条件

    为了简化流程并使其即插即用，从ACI版本6.0(2)和后续版本开始引入了APIC自动升级功能。

    通过替换或添加将新的APIC引入交换矩阵时，APIC软件必须与集群上运行的软件相匹配。这通常需要升级，升级过程需要花费额外的时间才能完成，APIC需要花费额外的时间才能加入交换矩阵

    这是一项自动功能，不需要任何配置。

    拓扑

    在此拓扑中，您有三个运行ACI版本6.0(5h)的APIC，而APIC3发生故障并需要更换。

    Topology Example

    执行APIC自动升级的步骤

    收到RMA APIC后，请配置思科集成管理控制器(CIMC)IP以匹配之前的CIMC地址。

    步骤1.登录到CIMC GUI。

    步骤2.通过键盘、视频和鼠标KVM访问APIC。

    导航到Launch vKVM > Click on it > One more window tab is going to open > Click on hyperlink

    step2-1
    step-2-2

    步骤3.初始化新APIC以检查其运行的APIC版本（您可以使用任何虚拟交换矩阵发现参数，如交换矩阵名称、交换矩阵ID、TEP池等）

    步骤4.初始化新APIC后，检查版本（您可以看到现有APIC版本为5.2.5c）

    apic3# acidiag version <== To check the APIC version
5.2.5c

    步骤5.使用给定命令重新加载新的APIC。

    acidiag touch clean <<== Commands to remove all configuration and reboot the devices
acidiag touch setup
acidiag reboot

    步骤6.从工作APIC收集sam_exported.config作为APIC初始化时使用的此信息。

    apic1# cd /data/data_admin
apic1# pwd
/data/data_admin <=== Location of sam_exported.config file
apic1# ls -l | grep sam
-rw-r--r-- 1 root root 349 Jul  3 07:32 sam_exported.config
    apic1# cat sam_exported.config
Setup for Active and Standby APIC
fabricDomain= bgl-aci04
fabricId= 1
systemName= bgl-aci04-apic1 <== APIC1 hostname , change based on APIC3
controllerID= 1
tepPool= 10.0.0.0/16
infraVlan= 3967
GIPo= 225.0.0.0/15
clusterSize= 5
standbyApic= NO
enableIPv4= Y
enableIPv6= N
firmwareVersion= 6.0(5h)
ifcIpAddr= 10.0.0.1
apicX= NO
podId= 1
standaloneApicCluster= no
oobIpAddr= 10.197.204.114/24 <== APIC1 OOB IP, Change based on APIC3

    步骤7.使用步骤6中收集的数据初始化新的APIC。

    step-7-1
    step-7-2

    步骤8.从APIC01 GUI停用有故障的APIC3

    导航到System > System Settings > Controllers > Cluster as Seen by Node

    step8-1

    单击设备右侧的三个点。点击“停用”

    step-8-2

    步骤9.验证节点的管理员状态，显示为“停止服务”，停用选项呈灰色显示。

    step9-1

    步骤10.从机架中移除有故障的APIC3，然后在机架中安装新的APIC3。

    步骤11.在机架中安装新APIC后，打开新APIC3的电源并连接电缆。电缆包括交换矩阵上行链路和管理端口。

    步骤12.等待10-15分钟，以便新的APIC可以通电。通过CIMC KVM验证新的APIC是否已开启，我们可以看到登录提示。（登录仅适用于rescue-user）

    步骤13.从APIC01 GUI委托APIC03。

    导航到System > System Settings > Controllers > Cluster as Seen by Node

    点击设备右侧的三个点>点击佣金

    step13

    步骤14:添加CIMC IP地址、用户名、密码，我们在更换的故障/旧APIC中使用了这些密码。点击Validate。一旦验证成功。

    输入APIC名称、管理密码（交换矩阵中使用的当前密码）、POD ID、带外管理地址和IPV4网关，然后点击Apply。（所有这些参数在更换时都属于旧的APIC）。

    step14-1
    step14-2



    step14-3

    step14-4

    步骤15.现在等待10-15分钟，以便使用5.2(5c)APIC版本将新APIC添加到交换矩阵。

    apic1# acidiag avread                

Local appliance ID=1 ADDRESS=10.0.0.1 TEP ADDRESS=10.0.0.0/16 ROUTABLE IP ADDRESS=0.0.0.0 CHASSIS_ID=8ca31168-c4ab-11ee-a6c2-5d61e00b2df0

Cluster of 3 lm(t):1(2024-07-03T07:52:20.791+00:00) appliances (out of targeted 3 lm(t):3(2024-07-03T09:21:10.936+00:00)) with FABRIC_DOMAIN name=bgl-aci04 set to version=apic-6.0(5h) lm(t):3(2024-07-03T07:18:46.821+00:00); discoveryMode=PERMISSIVE lm(t):0(1970-01-01T00:00:00.004+00:00); drrMode=OFF lm(t):0(1970-01-01T00:00:00.004+00:00); kafkaMode=ON lm(t):1(2024-02-06T05:02:19.730+00:00); autoUpgradeMode=ON lm(t):2(2024-07-03T13:18:18.036+00:00); clusterInterface=infra

        appliance id=1  address=10.0.0.1 lm(t):1(2024-07-03T07:33:50.078+00:00) tep address=10.0.0.0/16 lm(t):1(2024-07-03T07:33:50.078+00:00) routable address=0.0.0.0 lm(t):1(zeroTime) oob address=10.197.204.114/24 lm(t):1(2024-07-03T07:52:20.955+00:00) version=6.0(5h) lm(t):1(2024-07-03T13:21:01.604+00:00) chassisId=8ca31168-c4ab-11ee-a6c2-5d61e00b2df0 lm(t):1(2024-07-03T13:21:01.604+00:00) capabilities=0X17EEFFFFFFFFF--0X2020--0X3--0X1 lm(t):1(2024-07-03T11:03:37.219+00:00) rK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T07:52:20.965+00:00) aK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T07:52:20.965+00:00) oobrK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T07:52:20.965+00:00) oobaK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T07:52:20.965+00:00) cntrlSbst=(APPROVED, FCH2322V05G) lm(t):1(2024-07-03T13:21:01.604+00:00) (targetMbSn= lm(t):0(zeroTime), failoverStatus=0 lm(t):0(zeroTime)) podId=1 lm(t):1(2024-07-03T07:33:50.078+00:00) commissioned=YES lm(t):1(zeroTime) registered=YES lm(t):1(2024-07-03T07:33:50.078+00:00) standby=NO lm(t):1(2024-07-03T07:33:50.078+00:00) DRR=NO lm(t):0(zeroTime) apicX=NO lm(t):1(2024-07-03T07:33:50.078+00:00) virtual=NO lm(t):1(2024-07-03T07:33:50.078+00:00) oob gw address=10.197.204.1 lm(t):1(2024-07-03T07:33:50.078+00:00) oob address v6=:: lm(t):1(2024-07-03T07:33:50.078+00:00) oob gw address v6=:: lm(t):1(2024-07-03T07:33:50.078+00:00) active=YES(2024-07-03T07:33:50.078+00:00) health=(applnc:255 lm(t):1(2024-07-03T11:03:39.196+00:00) svc's)

        appliance id=2  address=10.0.0.2 lm(t):3(2024-07-03T12:40:59.116+00:00) tep address=10.0.0.0/16 lm(t):2(2024-02-06T05:43:35.885+00:00) routable address=0.0.0.0 lm(t):0(zeroTime) oob address=10.197.204.115/24 lm(t):1(2024-07-03T13:21:01.948+00:00) version=6.0(5h) lm(t):2(2024-07-03T13:21:01.600+00:00) chassisId=557cdb0e-c4b2-11ee-a0a8-93aaf27bee50 lm(t):2(2024-07-03T13:21:01.600+00:00) capabilities=0X17EEFFFFFFFFF--0X2020--0X7--0X1 lm(t):2(2024-07-03T11:03:37.452+00:00) rK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:21:01.948+00:00) aK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:21:01.948+00:00) oobrK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:21:01.948+00:00) oobaK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:21:01.948+00:00) cntrlSbst=(APPROVED, FCH2323V09W) lm(t):2(2024-07-03T13:21:01.600+00:00) (targetMbSn= lm(t):0(zeroTime), failoverStatus=0 lm(t):0(zeroTime)) podId=1 lm(t):2(2024-07-03T08:19:03.478+00:00) commissioned=YES lm(t):3(2024-07-03T12:41:00.239+00:00) registered=YES lm(t):3(2024-07-03T12:41:00.239+00:00) standby=NO lm(t):1(2024-07-03T12:41:00.239+00:00) DRR=NO lm(t):1(2024-07-03T12:41:00.239+00:00) apicX=NO lm(t):1(2024-07-03T12:41:00.239+00:00) virtual=NO lm(t):0(zeroTime) oob gw address=10.197.204.1 lm(t):1(2024-07-03T08:40:04.837+00:00) oob address v6=:: lm(t):1(2024-07-03T13:21:01.948+00:00) oob gw address v6=:: lm(t):1(2024-02-06T05:46:22.175+00:00) active=YES(2024-07-03T13:21:01.694+00:00) health=(applnc:255 lm(t):2(2024-07-03T11:03:39.702+00:00) svc's)

        appliance id=3  address=10.0.0.3 lm(t):101(2024-07-03T13:18:17.965+00:00) tep address=10.0.0.0/16 lm(t):3(2024-07-03T12:40:40.900+00:00) routable address=0.0.0.0 lm(t):0(zeroTime) oob address=10.197.204.116/24 lm(t):1(2024-07-03T13:21:01.949+00:00) version=5.2(5c) lm(t):3(2024-07-03T13:21:01.736+00:00) chassisId=1c697d94-3939-11ef-a452-6d7c540421fa lm(t):3(2024-07-03T13:21:01.736+00:00) capabilities=0X17EEFFFFFFFFF--0X2020--0X4--0 lm(t):3(2024-07-03T13:20:59.140+00:00) rK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:21:01.949+00:00) aK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:21:01.949+00:00) oobrK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:21:01.949+00:00) oobaK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:21:01.949+00:00) cntrlSbst=(APPROVED, FCH2322V0AG) lm(t):3(2024-07-03T13:21:01.736+00:00) (targetMbSn= lm(t):0(zeroTime), failoverStatus=0 lm(t):0(zeroTime)) podId=1 lm(t):101(2024-07-03T13:18:17.965+00:00) commissioned=YES lm(t):1(2024-07-03T13:17:21.104+00:00) registered=YES lm(t):2(2024-07-03T13:18:18.036+00:00) standby=NO lm(t):101(2024-07-03T13:18:17.965+00:00) DRR=NO lm(t):1(2024-07-03T13:17:21.104+00:00) apicX=NO lm(t):101(2024-07-03T13:18:17.965+00:00) virtual=NO lm(t):0(zeroTime) oob gw address=0.0.0.0 lm(t):1(2024-07-03T13:21:01.562+00:00) oob address v6=:: lm(t):1(2024-07-03T13:21:01.949+00:00) oob gw address v6=:: lm(t):1(2024-02-06T06:06:24.927+00:00) active=YES(2024-07-03T13:21:01.562+00:00) health=(applnc:112 lm(t):3(2024-07-03T12:41:44.076+00:00) svc's) <<== APIC03 is still on 5.2(5c) version

    步骤16.现有APIC将将此新APIC自动升级到6.0(5h)，并将它添加到集群中。您可以将此操作再保持30分钟，并再次检查之前的视频输出。

    apic1# acidiag avread

Local appliance ID=1 ADDRESS=10.0.0.1 TEP ADDRESS=10.0.0.0/16 ROUTABLE IP ADDRESS=0.0.0.0 CHASSIS_ID=8ca31168-c4ab-11ee-a6c2-5d61e00b2df0

Cluster of 3 lm(t):1(2024-07-03T07:52:20.791+00:00) appliances (out of targeted 3 lm(t):3(2024-07-03T13:47:07.520+00:00)) with FABRIC_DOMAIN name=bgl-aci04 set to version=apic-6.0(5h) lm(t):3(2024-07-03T13:47:42.401+00:00); discoveryMode=PERMISSIVE lm(t):0(1970-01-01T00:00:00.004+00:00); drrMode=OFF lm(t):0(1970-01-01T00:00:00.004+00:00); kafkaMode=ON lm(t):1(2024-02-06T05:02:19.730+00:00); autoUpgradeMode=OFF lm(t):1(2024-07-03T13:45:43.249+00:00); clusterInterface=infra

        appliance id=1  address=10.0.0.1 lm(t):1(2024-07-03T07:33:50.078+00:00) tep address=10.0.0.0/16 lm(t):1(2024-07-03T07:33:50.078+00:00) routable address=0.0.0.0 lm(t):1(zeroTime) oob address=10.197.204.114/24 lm(t):1(2024-07-03T07:52:20.955+00:00) version=6.0(5h) lm(t):1(2024-07-03T13:45:43.249+00:00) chassisId=8ca31168-c4ab-11ee-a6c2-5d61e00b2df0 lm(t):1(2024-07-03T13:45:43.249+00:00) capabilities=0X17EEFFFFFFFFF--0X2020--0X7--0X1 lm(t):1(2024-07-03T13:45:43.249+00:00) rK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T07:52:20.965+00:00) aK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T07:52:20.965+00:00) oobrK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T07:52:20.965+00:00) oobaK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T07:52:20.965+00:00) cntrlSbst=(APPROVED, FCH2322V05G) lm(t):1(2024-07-03T13:45:43.249+00:00) (targetMbSn= lm(t):0(zeroTime), failoverStatus=0 lm(t):0(zeroTime)) podId=1 lm(t):1(2024-07-03T07:33:50.078+00:00) commissioned=YES lm(t):1(zeroTime) registered=YES lm(t):1(2024-07-03T07:33:50.078+00:00) standby=NO lm(t):1(2024-07-03T07:33:50.078+00:00) DRR=NO lm(t):0(zeroTime) apicX=NO lm(t):1(2024-07-03T07:33:50.078+00:00) virtual=NO lm(t):1(2024-07-03T07:33:50.078+00:00) oob gw address=10.197.204.1 lm(t):1(2024-07-03T07:33:50.078+00:00) oob address v6=:: lm(t):1(2024-07-03T07:33:50.078+00:00) oob gw address v6=:: lm(t):1(2024-07-03T07:33:50.078+00:00) active=YES(2024-07-03T07:33:50.078+00:00) health=(applnc:255 lm(t):1(2024-07-03T13:47:42.561+00:00) svc's)

        appliance id=2  address=10.0.0.2 lm(t):3(2024-07-03T13:24:30.725+00:00) tep address=10.0.0.0/16 lm(t):2(2024-02-06T05:43:35.885+00:00) routable address=0.0.0.0 lm(t):0(zeroTime) oob address=10.197.204.115/24 lm(t):1(2024-07-03T13:45:43.970+00:00) version=6.0(5h) lm(t):2(2024-07-03T13:45:42.995+00:00) chassisId=557cdb0e-c4b2-11ee-a0a8-93aaf27bee50 lm(t):2(2024-07-03T13:45:42.995+00:00) capabilities=0X17EEFFFFFFFFF--0X2020--0X7--0X1 lm(t):2(2024-07-03T13:45:42.994+00:00) rK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:45:43.970+00:00) aK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:45:43.970+00:00) oobrK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:45:43.970+00:00) oobaK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:45:43.970+00:00) cntrlSbst=(APPROVED, FCH2323V09W) lm(t):2(2024-07-03T13:45:42.995+00:00) (targetMbSn= lm(t):0(zeroTime), failoverStatus=0 lm(t):0(zeroTime)) podId=1 lm(t):2(2024-07-03T08:19:03.478+00:00) commissioned=YES lm(t):3(2024-07-03T13:24:30.745+00:00) registered=YES lm(t):3(2024-07-03T13:24:30.745+00:00) standby=NO lm(t):1(2024-07-03T13:24:30.745+00:00) DRR=NO lm(t):1(2024-07-03T13:24:30.745+00:00) apicX=NO lm(t):1(2024-07-03T13:24:30.745+00:00) virtual=NO lm(t):0(zeroTime) oob gw address=10.197.204.1 lm(t):1(2024-07-03T08:40:04.837+00:00) oob address v6=:: lm(t):1(2024-07-03T13:45:43.970+00:00) oob gw address v6=:: lm(t):1(2024-02-06T05:46:22.175+00:00) active=YES(2024-07-03T13:42:57.715+00:00) health=(applnc:255 lm(t):2(2024-07-03T13:47:42.560+00:00) svc's)

        appliance id=3  address=10.0.0.3 lm(t):102(2024-07-03T13:42:57.550+00:00) tep address=10.0.0.0/16 lm(t):3(2024-07-03T13:24:21.522+00:00) routable address=0.0.0.0 lm(t):0(zeroTime) oob address=10.197.204.116/24 lm(t):1(2024-07-03T13:45:44.004+00:00) version=6.0(5h) lm(t):3(2024-07-03T13:45:43.443+00:00) chassisId=5803434b-393f-11ef-8e96-2c4f52b32ad0 lm(t):3(2024-07-03T13:45:43.443+00:00) capabilities=0X17EEFFFFFFFFF--0X2020--0X7--0X1 lm(t):3(2024-07-03T13:51:50.477+00:00) rK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:45:43.964+00:00) aK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:45:43.964+00:00) oobrK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:45:43.964+00:00) oobaK=(stable,present,0X206173722D687373) lm(t):1(2024-07-03T13:45:43.964+00:00) cntrlSbst=(APPROVED, FCH2322V0AG) lm(t):3(2024-07-03T13:45:43.443+00:00) (targetMbSn= lm(t):0(zeroTime), failoverStatus=0 lm(t):0(zeroTime)) podId=1 lm(t):102(2024-07-03T13:42:57.550+00:00) commissioned=YES lm(t):1(2024-07-03T13:38:51.799+00:00) registered=YES lm(t):1(2024-07-03T13:42:57.480+00:00) standby=NO lm(t):102(2024-07-03T13:42:57.550+00:00) DRR=NO lm(t):1(2024-07-03T13:38:51.799+00:00) apicX=NO lm(t):102(2024-07-03T13:42:57.550+00:00) virtual=NO lm(t):0(zeroTime) oob gw address=10.197.204.1 lm(t):1(2024-07-03T13:45:43.257+00:00) oob address v6=:: lm(t):1(2024-07-03T13:45:44.004+00:00) oob gw address v6=:: lm(t):1(2024-02-06T06:06:24.927+00:00) active=YES(2024-07-03T13:45:43.045+00:00) health=(applnc:255 lm(t):3(2024-07-03T13:47:42.405+00:00) svc's) <<== APIC03 is upgraded to 6.0(5h) version and health 255 shows it is fully fit

    要验证自动升级是否平稳运行且没有错误，请检查现有APIC上的svc_ifc_appliance director.bin.log文件，该文件负责升级新添加的APIC。

    地点：  /var/log/dme/log

    svc_ifc_appliancedirector.bin.log | grep "ApplianceAutoUpgrade.cpp"

4411||2024-07-03T13:03:02.014060877+00:00||appliance_director||DBG4||||# Registered APICs:3||../appliance/director/./ApplianceAutoUpgrade.cpp||115    <<   APIC3 is registered to the cluster

4411||2024-07-03T13:03:02.014069812+00:00||appliance_director||DBG4||||# APICs its version is same cluster version:2||../appliance/director/./ApplianceAutoUpgrade.cpp||116  <<   APIC01/02 have same version 6.0(5h)

4411||2024-07-03T13:03:02.014078887+00:00||appliance_director||DBG4||||# APICs its version is different cluster version:1||../appliance/director/./ApplianceAutoUpgrade.cpp||117   <<   APIC03 is running different version 5.2(5c)

4442||2024-07-03T13:04:02.025327143+00:00||appliance_director||DBG4||||Try to upgrade Appliance3||../appliance/director/./ApplianceAutoUpgrade.cpp||147    <<   Auto Upgrade Check Kicks in

4442||2024-07-03T13:04:02.025434226+00:00||appliance_director||DBG4||||ImageFile: /firmware/fwrepos/fwrepo/aci-apic-image-name.bin||../appliance/director/./ApplianceAutoUpgrade.cpp||160    <<  Image file location on Local APIC

4442||2024-07-03T13:04:02.025661541+00:00||appliance_director||DBG4||||Running rsync -8 -avzk --timeout 600 -e "ssh -p 1022 -i /securedata/ssh/root/id_rsa -o UserKnownHostsFile=/dev/null -o GSSAPIAuthentication=no -o StrictHostKeyChecking=no -o ConnectTimeout=60 -o ServerAliveInterval=60" /mgmt/support/insieme/auto_upgrade.py  root@10.0.0.3:/mgmt/support/insieme/auto_upgrade.py||../appliance/director/./ApplianceAutoUpgrade.cpp||202

4442||2024-07-03T13:04:03.001492232+00:00||appliance_director||DBG4||||Done: Copy auto_upgrade script to remote apic||../appliance/director/./ApplianceAutoUpgrade.cpp||220    <<  Upgrade script is copied to APIC03 from APIC01

4442||2024-07-03T13:04:03.001598593+00:00||appliance_director||DBG4||||Running rsync -8 -avzk --timeout 600 -e "ssh -p 1022 -i /securedata/ssh/root/id_rsa -o UserKnownHostsFile=/dev/null -o GSSAPIAuthentication=no -o StrictHostKeyChecking=no -o ConnectTimeout=60 -o ServerAliveInterval=60" /firmware/fwrepos/fwrepo/aci-apic-image-name.bin  root@10.0.0.3:/tmp/myImage.bin||../appliance/director/./ApplianceAutoUpgrade.cpp||226

4442||2024-07-03T13:13:59.287332478+00:00||appliance_director||DBG4||||Done: Copy iimage file to remote apic||../appliance/director/./ApplianceAutoUpgrade.cpp||244    <<  ISO image 6.0(5h) is coped to APIC03 from APIC01

4442||2024-07-03T13:13:59.287418460+00:00||appliance_director||DBG4||||Running ssh -p 1022 -i /securedata/ssh/root/id_rsa -o UserKnownHostsFile=/dev/null -o GSSAPIAuthentication=no -o StrictHostKeyChecking=no -o ConnectTimeout=60 -o ServerAliveInterval=60 root@10.0.0.3 "/mgmt/support/insieme/auto_upgrade.py 1 10.0.0.1"||../appliance/director/./ApplianceAutoUpgrade.cpp||250

4442||2024-07-03T13:17:55.430111171+00:00||appliance_director||DBG4||||Run remote upgrade done||../appliance/director/./ApplianceAutoUpgrade.cpp||268    <<   Running upgrade script on APIC03

4442||2024-07-03T13:17:55.430203755+00:00||appliance_director||DBG4||||Decommissioning Appliance 3||../appliance/director/./ApplianceAutoUpgrade.cpp||273    <<   APIC03 is decomissioned

4442||2024-07-03T13:20:25.430436301+00:00||appliance_director||DBG4||||Commissioning Appliance 3||../appliance/director/./ApplianceAutoUpgrade.cpp||277   <<   APIC03 is commissioned back to the fabric

    步骤17.如果自动APIC升级失败，则随后发生故障。

    步骤18.对于失败的情况，您可以通过执行全新重新加载并将新APIC添加回ACI交换矩阵以进行发现，始终可以重新触发自动APIC升级。

    如果这些步骤无法解决问题，请收集技术支持日志并联系思科TAC以获得进一步帮助。

    修订历史记录

    版本 发布日期 备注
    1.0
    08-Jul-2024
    初始版本
    TAC Authored

    由思科工程师提供

    • 皮尤什·卡塔利亚
      TAC
    • 马诺兰詹·维尔
      TAC

    此文档是否有帮助?

    Feedback反馈

    联系我们

    本文档适用于以下产品