この製品のマニュアルセットは、偏向のない言語を使用するように配慮されています。このマニュアルセットでの偏向のない言語とは、年齢、障害、性別、人種的アイデンティティ、民族的アイデンティティ、性的指向、社会経済的地位、およびインターセクショナリティに基づく差別を意味しない言語として定義されています。製品ソフトウェアのユーザーインターフェイスにハードコードされている言語、RFP のドキュメントに基づいて使用されている言語、または参照されているサードパーティ製品で使用されている言語によりドキュメントに例外が存在する場合があります。シスコのインクルーシブランゲージに対する取り組みの詳細は、こちらをご覧ください。
このドキュメントは、米国シスコ発行ドキュメントの参考和訳です。リンク情報につきましては、日本語版掲載時点で、英語版にアップデートがあり、リンク先のページが移動/変更されている場合がありますことをご了承ください。あくまでも参考和訳となりますので、正式な内容については米国サイトのドキュメントを参照ください。
ここでは、Cisco ASR 9000 シリーズ ルータでブロードバンド ネットワーク ゲートウェイ(BNG)の show subscriber コマンドの設定に使用される Cisco IOS XR ソフトウェアのコマンドについて説明します。 関連設定の詳細については、 『Cisco ASR 9000 Series Aggregation Services Router Broadband Network Gateway Configuration Guide』を参照してください。
加入者データベースの設定の詳細を表示するには、EXEC モードで show subscriber database コマンドを使用します。
show subscriber database { association | configuration | connection | interface | statistics summary }
association | 加入者セッションとダイナミック テンプレートの間のアソシエーションを表示します。 |
configuration | コンフィギュレーション データベース情報を表示します。 |
connection | 加入者クライアント接続 ID を表示します。 |
interface | 加入者ラベルとインターフェイス ハンドルの間のマッピングを表示します。 |
statistics | 加入者データベース統計情報を表示します。 |
summary | 加入者データベース サマリー数を表示します。 |
なし
EXEC
リリース | 変更内容 |
---|---|
リリース 4.2.0 |
このコマンドが追加されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てが原因でコマンドを使用できないと考えられる場合、AAA 管理者に連絡してください。
タスク ID | 操作 |
---|---|
network |
read |
show subscriber database コマンドの出力例は次のとおりです。
RP/0/RSP0/CPU0:router# show subscriber database association Mon Jun 14 16:24:50.432 EDT Object Name: TEMPL1 Object Type: IP-SUBSCRIBER-TEMPLATE Feature Name: IPV4 Attribute Name: ipv4/unnumbered reference count : 1 sysDb pathname : /cfg/gl/dynamic-templates/ipsubscriber/TEMPL1/ipv4/unnumbered datatype : string length : 10 value : Loopback0 Object Name: TEMPL2 Object Type: IP-SUBSCRIBER-TEMPLATE Feature Name: IPV4 Attribute Name: ipv4/mtu reference count : 1 sysDb pathname : /cfg/gl/dynamic-templates/ipsubscriber/ss/ipv4/mtu datatype : uint32 length : 4 value : 1500 Feature Name: QoS Attribute Name: qos/service_policy_in/qos_policy reference count : 1 sysDb pathname : /cfg/gl/dynamic-templates/ipsubscriber/ss/qos/service_policy_in/:qos_policy datatype : packed length : 20 value : packed AB CD 43 21 02 00 04 00 00 00 00 03 00 00 03 00 00 06 00 00 Feature Name: 'RSI' Attribute Name: rsi/vrf reference count : 1 sysDb pathname : /cfg/gl/dynamic-templates/ipsubscriber/ss/rsi/vrf datatype : 3 length : 5 value : blue RP/0/RSP0/CPU0:router# show subscriber database connection Tue Jun 15 11:00:19.650 EDT Client Connection Identifier: 0x0 ===================================== ref_count = 3 req_count = 0 bpi_reg_count = 0 spi_reconciled = TRUE bpi_reconciled = FALSE client_restarted = FALSE client_name = template-mgr timer_running = FALSE spi_cb_info: N/A Persistent Information: in_use = TRUE forced_full_resync = FALSE client_flags = TMPL_PROD state = SUBDB_CLIENT_FULL instance_no = 0 num_bpi_regs = 0 num_send_drop_bpi_msg = 0 num_send_drop_spi_msg = 0 num_recv_drop_bpi_msg = 0 num_recv_drop_spi_msg = 0 num_sent_bpi_msg = 0 num_sent_spi_msg = 0 num_recv_bpi_msg = 0 num_recv_spi_msg = 0 num_sent_pulse = 0 SPI AIPC Information: conn_present = 0 tx_attempt_count = 0 tx_count = 0 rx_count = 0 notify_connect_count = 0 notify_queue_high_count = 0 notify_queue_low_count = 0 notify_queue_full_count = 0 notify_data_waiting_count = 0 notify_error_count = 0 notify_close_count = 0 notify_sendstatus_count = 0 notify_open_count = 0 pulse_data_waiting_count = 0 queue_full = 0 queue_full_drop = 0 outstanding_buffers = 0 overflow_queue_size = 0 cumulative_overflow_msgs = 0 hwm_overflow_msgs = 0 BPI AIPC Information: conn_present = 1 tx_attempt_count = 0 tx_count = 0 rx_count = 1 notify_connect_count = 0 notify_queue_high_count = 0 notify_queue_low_count = 0 notify_data_waiting_count = 1 notify_error_count = 0 notify_close_count = 0 notify_sendstatus_count = 0 notify_open_count = 1 queue_full = 0 queue_full_drop = 0 outstanding_buffers = 0 overflow_queue_size = 0 cumulative_overflow_msgs = 0 hwm_overflow_msgs = 0 Feature Information (number of entries = 3): --------------------------------------------------- ***Feature Name*** = RSI Connection ID = 0x1 Session type = SUBDB_SESSION_LABEL_TYPE_IP_SUB_INBAND Activate Required = FALSE Config Set ID = 1 Registration Handle = 0x1 whichevent[0] = SUBDB_CB_EVENT_NONE whichevent[1] = SUBDB_CB_EVENT_ALL Feature State = SUBDB_FEATURE_REGISTERED ***Feature Name*** = RSI Connection ID = 0x1 Session type = SUBDB_SESSION_LABEL_TYPE_PPPOE_SUB Activate Required = FALSE Config Set ID = 1 Registration Handle = 0x2 whichevent[0] = SUBDB_CB_EVENT_NONE whichevent[1] = SUBDB_CB_EVENT_ALL Feature State = SUBDB_FEATURE_REGISTERED ***Feature Name*** = RSI Connection ID = 0x1 Session type = SUBDB_SESSION_LABEL_TYPE_IP_SUB_DHCP Activate Required = FALSE Config Set ID = 1 Registration Handle = 0x3 whichevent[0] = SUBDB_CB_EVENT_NONE whichevent[1] = SUBDB_CB_EVENT_ALL Feature State = SUBDB_FEATURE_REGISTERED Client Connection Identifier: 0x2 ===================================== ref_count = 2 req_count = 0 bpi_reg_count = 0 spi_reconciled = TRUE bpi_reconciled = TRUE client_restarted = FALSE client_name = iedge SVM timer_running = FALSE spi_cb_info: SUBDB_SPI_CB_PROD_ALL_DONE = SUBDB_CB_EVENT_NONE SUBDB_SPI_CB_SESSION_PROD_DONE = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_SESSION_ACTIVATED = SUBDB_CB_EVENT_NONE SUBDB_SPI_CB_SESSION_CREATED = SUBDB_CB_EVENT_NONE SUBDB_SPI_CB_SESSION_DESTROYED = SUBDB_CB_EVENT_NONE SUBDB_SPI_CB_SESSION_ASSOCIATED = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_SESSION_UNASSOCIATED = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_SESSION_CONFIG_CHANGED = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_TEMPLATE_INSTALLED = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_TEMPLATE_UNINSTALLED = SUBDB_CB_EVENT_ALL SUBDB_SPI_CB_OBJECT_AGEOUT = SUBDB_CB_EVENT_ALL Persistent Information: in_use = TRUE forced_full_resync = FALSE client_flags = TMPL_PROD, SESS_PROD state = SUBDB_CLIENT_FULL instance_no = 1 num_bpi_regs = 0 num_send_drop_bpi_msg = 0 num_send_drop_spi_msg = 0 num_recv_drop_bpi_msg = 0 num_recv_drop_spi_msg = 0 num_sent_bpi_msg = 0 num_sent_spi_msg = 0 num_recv_bpi_msg = 0 num_recv_spi_msg = 1 num_sent_pulse = 0 SPI AIPC Information: conn_present = 1 tx_attempt_count = 0 tx_count = 0 rx_count = 2 notify_connect_count = 0 notify_queue_high_count = 0 notify_queue_low_count = 0 notify_queue_full_count = 0 notify_data_waiting_count = 2 notify_error_count = 0 notify_close_count = 0 notify_sendstatus_count = 0 notify_open_count = 1 pulse_data_waiting_count = 0 queue_full = 0 queue_full_drop = 0 outstanding_buffers = 0 overflow_queue_size = 0 cumulative_overflow_msgs = 0 hwm_overflow_msgs = 0 BPI AIPC Information: conn_present = 0 tx_attempt_count = 0 tx_count = 0 rx_count = 0 notify_connect_count = 0 notify_queue_high_count = 0 notify_queue_low_count = 0 notify_data_waiting_count = 0 notify_error_count = 0 notify_close_count = 0 notify_sendstatus_count = 0 notify_open_count = 0 queue_full = 0 queue_full_drop = 0 outstanding_buffers = 0 overflow_queue_size = 0 cumulative_overflow_msgs = 0 hwm_overflow_msgs = 0 Feature Information (number of entries = 0): --------------------------------------------------- RP/0/RSP0/CPU0:router# show subscriber database interface Tue Jun 15 09:05:53.769 EDT Interface Ifhandle Session ID: Gi0/2/0/0.ip1 0x1000040 0x4000000 Gi0/2/0/0.ip2 0x1000060 0x4000082 RP/0/RSP0/CPU0:router# show subscriber database statistics Tue Jun 15 09:05:53.769 EDT 3 wrapping entries (2048 possible, 0 filtered, 3 total) Jun 15 06:49:40.123 subdb/common 0/0/CPU0 t4004322208 Process client ID '2' with connection event 'RESTARTED' Jun 15 06:49:40.125 subdb/common 0/0/CPU0 t4153857728 Process SPI END RECONCILE msg for client '2 [ring index '0'] Jun 15 06:49:40.125 subdb/common 0/0/CPU0 t4004322208 Process client ID '2' with connection event 'RECONCILED'
加入者管理内部マネージャ情報を表示するには、EXEC モードで show subscriber manager statistics コマンドを使用します。
show subscriber manager statistics { AAA | HA | PPSM | PRE | SVM | debug | performance | summary }
AAA | 認証、許可、アカウンティング コーディネータの統計情報を表示します。 |
HA | ハイアベイラビリティの統計情報を表示します。 |
PPSM | ポリシー プレーン セッション マネージャの統計情報を表示します。 |
PRE | ポリシー ルール エンジンの統計情報を表示します。 |
SVM | サービス マネージャの統計情報を表示します。 |
debug | デバッグの統計情報を表示します。 |
performance | パフォーマンスの統計情報を表示します。 |
summary | サマリー統計情報を表示します。 |
なし
EXEC
リリース | 変更内容 |
---|---|
リリース 4.2.0 |
このコマンドが追加されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てが原因でコマンドを使用できないと考えられる場合、AAA 管理者に連絡してください。
タスク ID | 操作 |
---|---|
network |
read |
これは、EXEC モードでの show subscriber manager statistics コマンドの出力例です。
RP/0/RSP0/CPU0:router# show subscriber manager statistics summary total
show subscriber manager statistics の出力は次のとおりです。
Wed Jan 23 09:57:41.855 GMT [ IEDGE SUMMARY STATISTICS ] Location: 0/0/CPU0 IEDGE SUMMARY ============= Control Policy errors Subscriber control policy not applied on interface = 0 No class match in Start Request = 0 Attribute format warnings NAS Port = 0 NAS Port id = 0 Destination station id = 0 Calling station id = 0 User Name = 0 User Profile Statistics User Profile Install = 0 User Profile Install errors = 0 User Profile Removes = 0 User Profile Errors = 0 Session Disconnect Flow Control Inflight = 0 Queued = 0 Location: 0/1/CPU0 IEDGE SUMMARY ============= Control Policy errors Subscriber control policy not applied on interface = 0 No class match in Start Request = 0 Attribute format warnings NAS Port = 72 NAS Port id = 0 Destination station id = 72 Calling station id = 72 User Name = 0 User Profile Statistics User Profile Install = 0 User Profile Install errors = 0 User Profile Removes = 0 User Profile Errors = 0 Session Disconnect Flow Control Inflight = 0 Queued = 0
次の表で、この出力に表示される重要なフィールドを説明します。
フィールド |
説明 |
---|---|
Control Policy errors |
制御ポリシーのエラーを指定します。 |
Attribute format warnings |
属性形式の警告を指定します。 |
User Profile Statistics |
ユーザ プロファイルの統計情報を指定します。 |
Session Disconnect Flow Control |
セッション切断フロー制御を指定します。 |
ダイナミック テンプレートから取得した加入者の実行コンフィギュレーションを表示するには、EXEC で show subscriber running-config コマンドを使用します。
show subscriber running-config { location | subscriber-label }
location | 指定した場所にあるすべてのセッションの加入者データベースの実行コンフィギュレーション情報を表示します。 |
subscriber-label | 0X0 ~ 0xffffffff の範囲の 16 進数の値の加入者値を入力できるようにします。 |
| | 出力修飾子を指定します。 |
なし
EXEC
リリース | 変更内容 |
---|---|
リリース 4.2.0 |
このコマンドが追加されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てが原因でコマンドを使用できないと考えられる場合、AAA 管理者に連絡してください。
タスク ID | 操作 |
---|---|
network |
read |
これは、show subscriber running-config コマンドの出力例です。
RP/0/RSP0/CPU0:router# show subscriber running-config
Tue Jun 15 09:05:53.769 EDT
Session ID: 0x4000000
dynamic-template
type ipsubscriber TEMPL1
ipv4 unnumbered Loopback0
!
!
dynamic-template
type ipsubscriber TEMPL2
service-policy input qos_policy
vrf blue
ipv4 mtu 1500
!
!
Session ID: 0x4000082
dynamic-template
type ipsubscriber TEMPL1
ipv4 unnumbered Loopback0
!
!
dynamic-template
type ipsubscriber TEMPL2
service-policy input qos_policy
vrf blue
ipv4 mtu 1500
!
!
加入者管理セッション情報を表示するには、EXEC モードで show subscriber session コマンドを使用します。
show subscriber session { all | debug | filter | subscriber-label }
all | すべての加入者セッションを表示します。 |
debug | デバッグ対象として選択された一意の加入者セッションを表示します。 |
filter | フィルタ基準に基づいて加入者セッション データベースの検索結果を表示します。 |
subscriber-label | 加入者セッションの一意の ID を表示します。 |
なし
EXEC
リリース | 変更内容 |
---|---|
リリース 4.2.0 |
このコマンドが追加されました。 |
リリース 4.3.1 |
サービス アカウンティング機能の情報を表示する、show subscriber session all detail コマンドの出力例が追加されました。 |
このコマンドを使用するには、適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。 ユーザ グループの割り当てが原因でコマンドを使用できないと考えられる場合、AAA 管理者に連絡してください。
タスク ID | 操作 |
---|---|
network |
read |
config-services |
read |
これは、EXEC モードでの show subscriber session コマンドの出力例です。
RP/0/RSP0/CPU0:router# show subscriber session all RP/0/RSP0/CPU0:router# show subscriber session all summary location 0/1/CPU0 RP/0/RSP0/CPU0:router# show subscriber session filter vrf vrf1 location 0/1/CPU0 RP/0/RSP0/CPU0:router# show subscriber session subscriber-label 40
show subscriber session の出力は次のとおりです。
Wed Jan 23 10:20:58.344 GMT Codes: IN - Initialize, CN - Connecting, CD - Connected, AC - Activated, ID - Idle, DN - Disconnecting, ED - End Type Interface State Subscriber IP Addr / Prefix LNS Address (Vrf) -------------------------------------------------------------------------------- PPPoE:PTA Gi0/1/0/0.pppoe1 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe2 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe3 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe1 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe2 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe3 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe1 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe2 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe3 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe1 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe2 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe3 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe4 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe5 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe6 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe4 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe5 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe6 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe4 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe5 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe6 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe4 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe5 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe6 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe7 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe8 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe9 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe7 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe8 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe9 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe7 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe8 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe9 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe7 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe8 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe9 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe10 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe11 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe12 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe10 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe11 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe12 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe10 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe11 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe12 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe10 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe11 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe12 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe13 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe14 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe15 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe13 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe14 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe15 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe13 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe14 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe15 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe13 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe14 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe15 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe16 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe17 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.pppoe18 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe16 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe17 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.1.pppoe18 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe16 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe17 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.2.pppoe18 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe16 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe17 AC 100.0.0.1 (default) PPPoE:PTA Gi0/1/0/0.3.pppoe18 AC 100.0.0.1 (default)
次の表で、この出力に表示される重要なフィールドを説明します。
フィールド |
説明 |
---|---|
Type |
加入者セッションのタイプを指定します。 |
Interface |
インターフェイス タイプを指定します。 |
State |
加入者セッションの状態を指定します。たとえば、開始、接続中、接続済み、アクティブ化済み、接続切断済み、アイドル、終了です。 |
Subscriber IP Addr / Prefix LNS Address (Vrf) |
加入者インターフェイスの IP アドレスを指定します。 |
この例では、すべての加入者セッションの詳細情報が表示されています。これには、サービス アカウンティング情報も含まれます。
RP/0/RSP0/CPU0:router# show subscriber session all detail
Interface: Bundle-Ether12.125.ip643
Circuit ID: Unknown
Remote ID: 00066c9ced63ef20
Type: IP: DHCP-trigger
IPv6 State: Up, Fri Feb 8 16:42:57 2013
IPv6 Address: 2001:2::b246, VRF: default
Delegated IPv6 Prefix: 3000:2:0:8546::/64, VRF: default
IPv6 Interface ID: 0004007d000c (30 30 30 34 30 30 37 64 30 30 30 63)
Mac Address: 0010.6401.0102
Account-Session Id: 00008ad2
Nas-Port: Unknown
User name: 0010.6401.0102
Outer VLAN ID: 125
Subscriber Label: 0x00000046
Created: Fri Feb 8 16:42:57 2013
State: Activated
Authentication: unauthenticated
Access-interface: Bundle-Ether12.125
Policy Executed:
policy-map type control subscriber BNG-Test
event Session-Start match-first [at Fri Feb 8 16:42:57 2013]
class type control subscriber PPPoE do-until-failure [Failed]
class type control subscriber IPoE-DS do-until-failure [Succeeded]
1 activate dynamic-template IPoE [Succeeded]
10 authorize aaa list default [Succeeded]
15 activate dynamic-template test-svc1 [Succeeded]
16 activate dynamic-template test-svc2 [Succeeded]
Session Accounting:
Acct-Session-Id: 00008ad2
Method-list: default
Accounting started: Fri Feb 8 16:43:27 2013
Interim accounting: Off
Service Accounting: AcctTurbo1G
Acct-Session-Id: 00008ad3
Method-list: default
Accounting started: Fri Feb 8 16:43:27 2013
Interim accounting: On, interval 2 mins
Last successful update: Never
Next update in: 00:01:48 (dhms)
Service Accounting: test-svc3
Acct-Session-Id: 00008ad4
Method-list: default
Accounting started: Fri Feb 8 16:43:27 2013
Interim accounting: On, interval 2 mins
Last successful update: Never
Next update in: 00:01:48 (dhms)
Service Accounting: svcAcct
Acct-Session-Id: 00008ad5
Method-list: default
Accounting started: Fri Feb 8 16:43:27 2013
Interim accounting: Off
Service Accounting: test-svc1
Acct-Session-Id: 00008ad6
Method-list: default
Accounting started: Fri Feb 8 16:43:27 2013
Interim accounting: On, interval 2 mins
Last successful update: Never
Next update in: 00:01:48 (dhms)
Service Accounting: test-svc2
Acct-Session-Id: 00008ad7
Method-list: default
Accounting started: Fri Feb 8 16:43:27 2013
Interim accounting: On, interval 2 mins
Last successful update: Never
Next update in: 00:01:48 (dhms)
Last COA request received: unavailable