The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
適切なタスク ID を含むタスク グループに関連付けられているユーザ グループに属している必要があります。このコマンド リファレンスには、各コマンドに必要なタスク ID が含まれます。ユーザ グループの割り当てが原因でコマンドを使用できないと考えられる場合、AAA
管理者に連絡してください。
Cisco IOS XR ソフトウェアを実行している必要があります。
複合ミニイメージおよび MPLS パッケージをインストールする必要があります。
Note
この点は、Cisco NCS 540 シリーズ ルータには適用されません。
基本 ISO イメージをインストールし、show install active コマンドを使用して MPLS パッケージがインストールされていることを確認する必要があります。
Router# show install active | i mpls
xr-mpls 7.0.1.141Iv1.0.0-1
xr-mpls-oam 7.0.1.141Iv1.0.0-1
xr-mpls-oam-client 7.0.1.141Iv1.0.0-1
xr-mpls-static 7.0.1.141Iv1.0.0-1
RP/0/RP0/CPU0:Router(config)#mpls ldp
RP/0/RP0/CPU0:Router(config-ldp)#address-family ipv4
RP/0/RP0/CPU0:Router(config-ldp-af)#label remote accept from 192.168.1.1:0 for acl_1
RP/0/RP0/CPU0:Router(config-ldp-af)#label remote accept from 192.168.2.2:0 for acl_2
RP/0/RP0/CPU0:Router(config-ldp-af)#commit