Campus Network

Over the past decade, campus network design has evolved in response to emerging technologies and changing business outcomes. For enterprises to leverage cost-saving, and solutions for increased productivity, they need technologies to provide a secure foundation to scale business needs.

Campus Network with Cisco DNA courses provide insight into why enhanced technology is important and how to apply this knowledge to create a campus network that includes custom levels of productivity-enhancing applications needed in your environment. Topics covered include network design process, network automation and assurance, network management, increasing network availability, and storage networking. Whether you need an overview of modern campus technologies or seeking guidance on how to design switched and routed networks that support these technologies, these courses will support your endeavor. Level 2 courses marked with an * are available for Continuing Education (CE) credit.

Level 1 Courses

  • Cisco Digital Network Architecture Center Release 1.3
  • Cisco DNA Center: 2.X Features and Enhancements
  • Cisco DNA Center: 2.X User and Device Analytics
  • Cisco DNA Center: Assurance
  • Cisco DNA Center: Automation
  • Cisco DNA Center: Backup and Restore
  • Cisco DNA Center: Border Automation
  • Cisco DNA Center: Building Network Hierarchy
  • Cisco DNA Center: Configure DNA Center Design Section
  • Cisco DNA Center: Configure System Settings
  • Cisco DNA Center: Create Templates to Automate Device Configuration Changes
  • Cisco DNA Center: Deploying Application Policies in the Fabric
  • Cisco DNA Center: Device Provisioning, Templates and API
  • Cisco DNA Center: Discover Your Network
  • Cisco DNA Center: Display Network Topology
  • Cisco DNA Center: DNA Center Installation and Configuration
  • Cisco DNA Center: Getting started
  • Cisco DNA Center: Implementing SXP in the SD-Access Fabric
  • Cisco DNA Center: Integrating a Brownfield WLC
  • Cisco DNA Center: Layer 2 Wired Migration
  • Cisco DNA Center: Manage Applications
  • Cisco DNA Center: Manage Users
  • Cisco DNA Center: Manage Your Inventory
  • Cisco DNA Center: Multisite SDA Transit
  • Cisco DNA Center: Over the Top (OTT) Wireless
  • Cisco DNA Center: SDA Design and Implementation
  • Cisco DNA Center: SDA Fabric -101 Design and Implementation
  • Cisco DNA Center: SDA Fusion Design and Configuration
  • Cisco DNA Center: SDA Micro Segmentation
  • Cisco DNA Center: SDA Segmentation - Macro & Micro
  • Cisco DNA Center: SDA Segmentation for Corporate and Guest Wireless Access
  • Cisco DNA Center: SDA Segmentation for Corporate Wired Access
  • Cisco DNA Center: SD-Access Architecture
  • Cisco DNA Center: Software Image Management
  • Cisco DNA Center: System Installation and Troubleshooting
  • Cisco DNA Center: Using PnP for Day 0 Onboarding and LAN Automation
  • Cisco DNA Center: Wired SDA Guest
  • Cisco IBN Adoption: Campus Network Assurance
  • Cisco IBN Adoption: Campus Network Segmentation
  • Cisco IBN Adoption: Campus Software Image Management
  • Cisco IBN Adoption: Network Device Onboarding
  • Cisco IBN Adoption: Practices of Adoption
  • Cisco IBN Adoption: Scalable Access Policy
  • Cisco IBN Adoption: Time to Value Adoption
  • Cisco Identity Services Engine Release 2.6
  • Cisco Identity Services Engine Release 2.4
  • Cisco Identity Services Engine Release 2.3
  • Cisco SD-Access: Fabric in a Box (FiaB)
  • Configuring and using Wireless Analytics in SDA (ENCWA10)
  • Identity Services Engine (ISE) Integration & Troubleshooting with DNA Center
  • Implementing Cisco Catalyst 9000 Switches (ENC9K)
  • Introduction to 802.1X Operations for Cisco Security Professionals (802.1X)
  • Introduction to Transforming to a Cisco Intent-Based Network (INTIBN)
  • Leveraging Cisco Intent-Based Networking DNA Assurance (DNAAS)
  • Transforming to a Cisco Intent-Based Network (IBNTRN)
  • Understanding Cisco SDA Fundamentals (SDAFND)

Level 2 Remote Practice Labs

  • Add Maps to Cisco Prime Infrastructure
  • Add Outline of Walls to Cisco CMX Floor Plan Maps
  • Add the AP Placement and Orientation
  • Analyze Wireless Networks with Advanced Assurance Tools
  • Application Hosting on Cisco Catalyst 9000 Series Switches Using the CLI
  • Application Hosting on Cisco Catalyst 9300 Using Cisco DNA Center
  • Apply OSPF Optimization
  • Build Reports Using Ansible-Viptela Roles
  • Capture Successful QoS Traffic Marking in the Wireless Network
  • Configure a DHCP Scope
  • Configure a Dynamic (VLAN) Interface
  • Configure a Router on a Stick
  • Configure a WLAN
  • Configure an Interface on a Cisco Router
  • Configure and Test 802.1X Operations
  • Configure and Verify EtherChannel
  • Configure and Verify Flexible NetFlow
  • Configure and Verify IPv4 ACLs
  • Configure and Verify IPv4 Static Routes
  • Configure and Verify Layer 2 Discovery Protocols
  • Configure and Verify NTP
  • Configure and Verify Port Security
  • Configure and Verify Single-Area OSPF
  • Configure and Verify Single-Homed EBGP
  • Configure and Verify VRF
  • Configure BGP Advanced Features
  • Configure BGP Route Reflectors
  • Configure BYOD in the Wireless Network
  • Configure Cisco AVC in the Wireless Network
  • Configure Default Gateway
  • Configure EIGRP Load Balancing and Authentication
  • Configure EIGRP Stub Routing, Summarization, and Default Routing
  • Configure EIGRP Using Classic Mode and Named Mode for IPv4 and IPv6
  • Configure Guest Services in the Wireless Network
  • Configure IBGP and EBGP
  • Configure MP-BGP for IPv4 and IPv6
  • Configure Northbound Notifications
  • Configure OSPF Authentication
  • Configure OSPF Stub Areas and Summarization
  • Configure OSPFv3 for IPv4 and IPv6
  • Configure Perpetual PoE and Fast PoE on the Cisco Catalyst 9000 Series Switch
  • Configure QoS in the Wireless Network for Voice and Video Services
  • Configure Routing with VRF-Lite
  • Configure Secure Management Access for WLCs and APs
  • Configure Switch and WLC for Cisco CMX
  • Configure Syslog
  • Configure VLAN and Trunk
  • Configure Wireless Client Authentication in a Centralized Deployment
  • Configure WLAN Using WPA2 PSK Using the GUI
  • Configuring DNA Center Design
  • Configuring SD-Access Wireless Integration
  • Configuring the Identify Services Engine
  • Configuring Wireless Hosts and Access Points
  • Connect a Client to the Wi-Fi Network
  • Continue to Add Maps to Cisco Prime Infrastructure
  • Continue to Customize Detect and Locate in Cisco CMX
  • Create the Cisco IOS Image Backup
  • Create the Initial Portal in Connect and Engage
  • Creating SD-Access Policy
  • Define a RADIUS Server
  • Deploy Brownfield and Fabric Wireless Network with Cisco DNA Center
  • Deploy SD-Access Layer 2 Borders and Multicast and Integrate Cisco DNA Center with External Services or Applications
  • Deploy Cisco SD-Access Campus Fabric Using Cisco DNA Center Automation
  • Deploy Wired Fabric Networks with Cisco DNA Center
  • Design a Wireless Network
  • Design a Wireless Network for a Specific Vertical
  • Design a Wireless Network That Extends Beyond the Campus
  • Discover and Automate the Underlay Topology Using PnP Base Automation Service of Cisco DNA Center GUI
  • Enable and Verify Encrypted Traffic Analytics
  • Enabling Dynamic Authentication
  • Explore Cisco DNA Center and Automate Network Changes
  • Explore Cisco Meraki Integration APIs
  • Explore Cisco Meraki Webhook Alerts
  • Explore JSON Objects and Scripts in Python
  • Explore Switch Management Automation and Programmability
  • Explore the Background Image, Themes, and Languages in the Portal Template
  • Explore the Cisco DNA Center
  • Export Maps from Cisco Prime Infrastructure
  • Implement AAA Services for Central Mode WLANs
  • Implement AAA Services for FlexConnect Mode WLANs
  • Implement BGP Path Selection
  • Implement Cisco EasyQoS Using the Cisco APIC-EM GUI
  • Implement Cisco Meraki API Automation
  • Implement Local and Server-Based AAA
  • Implement Multiarea OSPF
  • Implement On-Box Programmability and Automation with Cisco IOS XE Software
  • Implement OSPF Tuning
  • Implement OSPFv3
  • Implement PBR
  • Implement Routing Protocol Redistribution
  • Implement Streaming Telemetry with Cisco IOS XE
  • Implement the Cisco Network Plug and Play Solution Using Cisco APIC-EM
  • Integrate Meraki with CMX Cloud
  • Log into the WLC
  • Manage Feature Templates with Ansible
  • Manipulate Redistribution
  • Manipulate Redistribution Using Route Maps
  • Monitor the Health of Network Devices, Clients, and Applications
  • Monitor the WLC
  • Navigate Cisco APIC-EM GUI—Network, Device, and Topology Discovery Using APIC-EM
  • Observe How a Switch Operates
  • Perform Basic Switch Configuration
  • Perform GIR on Cisco Catalyst 9000 Series Switch
  • Perform Site Provisioning and Monitoring Using the Cisco IWAN Application
  • Perform Site Provisioning with NFVIS on Cisco UCS C220 Using OAM Servers
  • Perform the Initial Configuration of Cisco CMX
  • Prepare Cisco DNA Center for Assurance
  • Provisioning SD-Access Overlay
  • Review Cisco Enhanced Wireless Features
  • Test Drive Cisco DNA Center APIs
  • Troubleshoot BGP Issues
  • Troubleshoot EIGRP Issues
  • Troubleshoot Network, Client, and Application Issues
  • Troubleshoot OSPF Issues
  • Troubleshoot Port Duplex Issues
  • Troubleshoot Redistribution Issues
  • Troubleshoot Using the Cisco APIC-EM Path Trace Application
  • Troubleshoot VLAN and Trunk Issues
  • Troubleshoot Wireless Client Connectivity Issues
  • Upgrade Cisco IOS Image
  • Use Detect and Locate
  • Use NAPALM to Configure and Verify Device Configuration
  • Use NETCONF Via SSH
  • Use Python on Cisco IOS XE Software
  • Use RESTCONF with Cisco IOS XE Software
  • Use the Manage Function in CMX Cloud
  • Use the System Settings Menu to Configure Cisco CMX
  • Validating DNA Center and Underlay Connectivity
  • Verify the EIGRP Topology Table
  • Verify the Link-State Database
  • Work with Analytics in Cisco CMX
  • Work with Presence Analytics and Connect and Engage
  • Writing and Troubleshooting Python Scripts