The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Contents
1 - 7 - 8 - A - B - C - D - E - F - G - H - I - J - K - L - M - N - O - P - Q - R - S - T - U - V - W -Index
1
11n Mode parameter 1
1250 series access points
and PoE Status field 17
7920 AP CAC parameter 1 2
7920 Client CAC parameter 1 2
7920 support mode
configuring 1 2
described 1 2
7921 support mode 1 28
802.11a (or 802.11b) > Client Roaming page 1
802.11a (or 802.11b) > Voice Parameters page 1 2 3
802.11a (or 802.11b/g) > EDCA Parameters page 1
802.11a (or 802.11b/g) Global Parameters page 1 2 3
802.11a (or 802.11b/g) Network Status parameter 1 2 3
802.11a/n (or 802.11b/g/n) Radios page 1 2
802.11g Support parameter 1 2
802.11h Global Parameters page 1
802.11h, described 1
802.11n
devices 1
802.1Q VLAN trunk port 1
802.1Q-in-Q VLAN Tag 1 2
802.1Q-in-Q VLAN Tagging
configuring using CLI 1 2
configuring using GUI 1 2
802.1X authentication for access points
configuring
the switch 1
using the CLI 1
described 1
802.1x Authentication parameter 1
802.3 bridging
configuring using the CLI 1
configuring using the GUI 1
802.3 Bridging parameter 1
802.3 frames 1
802.3X flow control, enabling 1A
Access Control List Name parameter 1 2 3
access control lists (ACLs)
applying to the controller CPU
using the CLI 1
configuring
using the CLI 1 2
counters
configuring using the CLI 1
configuring using the GUI 1 2
rules 1 2 3
using with the debug facility 1 2
Access Control Lists > Edit page 1 2 3
Access Control Lists > New page 1 2
Access Control Lists page 1
Access Mode parameter 1
access point core dumps, uploading
using the GUI 1
access point count, approved tiers for 5500 series controllers 1
access point event logs, viewing 1 2
access point groups
assigning access points to
using the CLI 1 2
using the GUI 1 2
creating
using the CLI 1 2
removing
using the CLI 1 2
using the GUI 1 2
viewing 1 2
access point monitor service, debugging 1
Access Point Roles
Defining 1
access points
assisted roaming 1
authorization list 1
authorizing
using LSCs 1
using MICs 1
priming 1
verifying that they join the controller 1
viewing join information
using the GUI 1 2
ACL Name parameter 1 2
ACL. See <Default Para Font>access control lists (ACLs) 1 2
Action parameter 1 2 3 4
Add AAA Client page (on CiscoSecure ACS) 1 2
Add AP button 1
Add New Rule button 1 2
Admin Status parameter 1
administrator access 1
Admission Control (ACM) parameter 1
Aggregated MAC Service Data Unit (A-MSDU) 1
aggregation method, specifying 1
AirMagnet Enterprise Analyzer 1
Aironet IE parameter 1
Airopeek 1
All APs > Details for (Advanced) page 1 2
All APs > Details for (Credentials) page 1
All APs > Details for (High Availability) page 1 2
All APs page 1
AnchorTime parameter 1 2
Antenna Gain parameter 1
Antenna parameter 1
Antenna Type parameter 1
AP > Clients > Traffic Stream Metrics page 1
AP Authentication Policy page 1 2
AP Core Dump parameter 1
AP Ethernet MAC Addresses parameter 1
AP Failover Priority parameter 1
AP Group Name parameter 1 2
AP Groups > Edit (APs) page 1 2
AP Groups page 1 2
AP Mode parameter 1 2 3
AP Name parameter 1 2
AP Primary Discovery Timeout parameter 1
ap-count evaluation licenses, activating
using the CLI 1
using the GUI 1
AP-manager interface
and dynamic interfaces 1
described 1
Applying ACLs to a WLAN 1
Applying ACLs to the controller CPU 1
Applying Layer2 ACLs to a WLAN 1
Applying Layer2 ACLs to an AP 1
Assignment Method parameter 1
Authority ID Information parameter 1 2
Authority ID parameter 1
Authorize LSC APs against auth-list parameter 1
Authorize MIC APs against auth-list or AAA parameter 1
auto-anchor mobility
configuring
using the GUI 1
overview 1
Average Data Rate parameter 1 2 3 4 5
Average Real-Time Rate parameter 1 2 3 4 5
Avoid Cisco AP Load parameter 1 2
Avoid Foreign AP Interference parameter 1 2
Avoid Non-802.11a (802.11b) Noise parameter 1 2B
Back-up Primary Controller Name field 1
Back-up Secondary Controller Name parameter 1
bandwidth-based CAC
enabling
using the CLI 1
using the GUI 1
Beacon Period parameter 1 2
browsers supported 1
Burst Data Rate parameter 1 2 3 4 5
Burst Real-Time Rate parameter 1 2 3 4 5C
CA Server URL parameter 1
CAC
configuring for 7920 phones 1 2
enabling
using the CLI 1
using the GUI 1
in mesh networks 1
viewing using the CLI 1
capacity adder license. See <Default Para Font>licenses 1
CAPWAP Preferred Mode 1 2
configuring
using the CLI 1
CCKM
FlexConnect groups 1
CCX
configuring Aironet IEs
using the CLI 1
described 1
link test 1
viewing a client’s version
using the GUI 1
CCX Layer 2 client roaming
configuring
using the CLI 1
debugging using the CLI 1
described 1 2
obtaining information using the CLI 1
CCX radio management
features 1
flexconnect considerations 1
CCX Version parameter 1
CCXv5 clients
enabling location presence 1
CDP > AP Neighbors > Detail page 1
CDP > Interface Neighbors > Detail page 1
CDP > Traffic Metrics page 1
CDP Advertisement Version parameter 1
CDP AP Neighbors page 1
CDP Protocol Status parameter 1
CDP State parameter 1
Certificate Authority (CA) certificates
downloading
using the CLI 1
using the GUI 1
overview 1
uploading
using the CLI 1
using the GUI 1
Certificate Password parameter 1
Certificate Type parameter 1
Change Rules Priority parameter 1
Channel Announcement parameter 1
Channel Assignment Leader parameter 1 2
Channel Assignment Method parameter 1 2
Channel parameter 1 2
Channel Quiet Mode parameter 1
Channel Scan Duration parameter 1 2
Channel Width Parameter 1 2
CIDS Sensor Add page 1
CIDS Shun List page 1
Cisco 3300 Series Mobility Services Engine (MSE), using with wIPS 1
Cisco 5508 Wireless Controller
ports 1
Cisco 5508 Wireless Controllers
ports 1
Cisco 5508 WLC
multiple AP-manager interfaces 1
Cisco 5508 WLCs
multiple AP-manager interfaces 1
Cisco 7921 Wireless IP Phones 1 2
Cisco Aironet 700 Series 1
Cisco Discovery Protocol (CDP)
configuring
using the CLI 1
using the GUI 1 2
described 1
enabling using the GUI 1
supported devices 1
viewing neighbors
using the CLI 1
using the GUI 1 2
viewing traffic information
using the CLI 1
Cisco Discovery Protocol parameter 1
Cisco License Manager (CLM)
and the controller license agent 1
Cisco Licensing website 1
Cisco Wireless Solution
described 1
Clear Filter link 1 2
Clear Stats on All APs button 1
CLI
logging into 1
logging out 1
navigating 1
troubleshooting commands 1
using 1 2
client location, using Prime Infrastructure 1
client MFP 1 2
Client Protection parameter 1 2
client roaming, configuring 1
Client Type parameter 1
clients
viewing CCX version
using the CLI 1
using the GUI 1
Clients > AP > Traffic Stream Metrics page 1
Clients > Detail page
viewing client details 1
viewing the status of workgroup bridges 1
Commands > Reset to Factory Defaults page 1
Community Name parameter 1
Configuration File Encryption parameter 1
configuration files
downloading
using the GUI 1 2
editing 1
Configure Dynamic Anchoring of Static IP Clients
Using the CLI 1
Configure option for RRM override 1
Configure RF Group
Using CLI 1
Configure RF Group Mode
Using GUI 1
Configuring ACLs - GUI 1
Configuring CC (CLI) 1
Configuring Cisco Cleanair
Using the CLI 1
Configuring Cisco CleanAir
Using the GUI 1
Configuring Client Exclusion Policies (CLI) 1
Configuring Client Exclusion Policies (GUI) 1
Configuring Country Codes (CLI) 1
Configuring Country Codes (GUI) 1
Configuring Dynamic Anchoring of Static IP Clients
Using the GUI 1
Configuring FIPS (CLI) 1
configuring for the debug facility 1 2
Configuring Layer2 ACLs - GUI 1
configuring optimized roaming
using GUI 1
configuring RxSOP
using CLI 1
using GUI 1
Configuring Sniffing on an Access Point
Using the GUI 1
Configuring UCAPL (CLI) 1
Control and Provisioning of Wireless Access Points protocol (CAPWAP)
debugging 1
described 1
restrictions 1
viewing MTU information 1
Controller Time Source Valid parameter 1 2
controllers
configuration
saving 1
discovery process 1
overview 1
platforms 1
core dump files
uploading from a 5500 series controller to a TFTP or FTP server 1
Core Dump page 1
Country Code parameter 1
country codes
described 1
viewing using the CLI 1
Country page 1
Coverage Exception Level per AP parameter 1 2
coverage hole detection
configuring per controller
using the CLI 1
using the GUI 1 2
coverage hole detection and correction 1
crash files
uploading
using the CLI 1
Creating Multiple AP Manager Interfaces - CLI 1
Creating Multiple AP-Manager Interfaces (GUI) 1
Custom Signatures page 1D
data encryption
and OfficeExtend access points 1
configuring
using the CLI 1
using the GUI 1
Data Encryption parameter 1 2
Data Path parameter 1
Data Rates parameter 1 2
DCA Channel Sensitivity parameter 1 2
DCA Channels parameter 1 2
debug commands, sending 1
debug facility
described 1 2
Default Mobility Group parameter 1
default-group access point group 1 2
described 1
Destination parameter 1 2 3
Destination Port parameter 1 2
Detect and Report Ad-Hoc Networks parameter 1
device certificates
downloading
using the GUI 1 2
overview 1
Device certificates
uploading
using the CLI 1
using the GUI 1
DHCP option 43, in controller discovery process 1
DHCP option 52, in controller discovery process 1
directed roam request 1
Direction parameter 1
disabled clients, configuring a timeout 1
discovery request timer, configuring 1
distribution system ports 1 2
Diversity parameter 1
domain name server (DNS) discovery 1
Download button
downloading a CA certificate 1
downloading a device certificate 1
Download File to Controller page
downloading CA certificates 1
downloading configuration files 1
downloading login banner file 1
Download Third-Party Certificate
using the CLI 1
using the GUI 1
DSCP parameter 1 2
DTIM 1
DTLS 1
DTLS data encryption. See <Default Para Font>data encryption 1
DTPC Support parameter 1 2
dynamic AP management
for dynamic interface 1
for the management interface 1
Dynamic AP Management parameter
for dynamic interface 1
for management interface 1
dynamic AP-manager interface 1
dynamic channel assignment (DCA)
40-MHz channelization 1 2
configuring
using the CLI 1
using the GUI 1 2
described 1
dynamic interface example 1
dynamic transmit power control, configuring 1 2E
EDCA Profile parameter 1
Edit QoS Profile page 1 2
Edit QoS Role Data Rates page 1
Enable AP Local Authentication parameter 1
Enable Authentication for Listener parameter 1
Enable Check for All Standard and Custom Signatures parameter 1
Enable Counters parameter 1 2
Enable Coverage Hole Detection parameter 1 2
Enable CPU ACL parameter 1
Enable CPU IPv6 ACL 1
Enable Default Authentication parameter 1
Enable Dynamic AP Management parameter 1
Enable EAP-FAST Authentication parameter 1
Enable LEAP Authentication parameter 1
Enable Least Latency Controller Join parameter 1
Enable Link Latency parameter 1
Enable Listener parameter 1
Enable Low Latency MAC parameter 1
Enable LSC on Controller parameter 1
Enable NAT Address parameter 1
Enable Notification parameter 1
Enable OfficeExtend AP parameter 1
Enable Tracking Optimization parameter 1
end-user license agreement (EULA) 1 2
enhanced distributed channel access (EDCA) parameters
configuring using the CLI 1
enhanced neighbor list
described 1
request (E2E) 1
Enter Saved Permission Ticket File Name parameter 1
EoIP port 1
epings 1
error codes, for failed VoIP calls 1 2
Ethernet connection, using remotely 1
evaluation licenses
installed on 5508 WLCs 1
event reporting for MFP 1 2
Expedited Bandwidth parameter 1
Expiration Timeout for Rogue AP and Rogue Client Entries parameter 1F
factory default settings
resetting using the GUI 1
failover priority for access points
configuring
using the CLI 1
using the GUI 1
described 1
viewing using the CLI 1
Fallback Mode parameter 1
fast heartbeat timer
configuring
using the CLI 1
using the GUI 1
described 1
fast SSID changing
configuring using the GUI 1
File Compression parameter 1
File Name to Save Credentials parameter 1
File Type parameter
downloading a CA certificate 1
downloading a configuration file 1
downloading a device certificate 1
Login Banner 1
upgrading controller software 1 2
uploading a CA certificate 1
uploading a configuration file 1
uploading a device certificate 1
uploading packet capture files 1
uploading PACs 1
Fingerprint parameter 1
FlexConnect groups
backup RADIUS server 1
CCKM 1
described 1
local authentication 1
FlexConnect Mode AP Fast Heartbeat Timeout parameter 1
Fragmentation Threshold parameter 1 2
FTP server guidelines 1G
General (controller) page
configuring an RF group 1
enabling link aggregation 1
General (security) page 1
Generate Rehost Ticket button 1
generating CSR 1
Global AP Failover Priority parameter 1
Global Configuration page
configuring backup controllers 1
configuring failover priority for access points 1
Group Mode parameter 1
Group Name parameter 1 2
guest user accounts
viewing
using the CLI 1
using the GUI 1
guest WLAN, creating 1
GUI
guidelines 1
using 1
Guidelines and Limitations for Predownloading 1H
hex2pcap sample output 1 2
Holdtime parameter 1
HTTP Access parameter 1
HTTP Configuration page 1
HTTPS Access parameter 1
Hysteresis parameter 1I
IDS sensors
described 1
IDS signatures
described 1
frequency 1
MAC frequency 1 2
measurement interval 1
pattern 1
quiet time 1 2
tracking method 1
IGMP Snooping 1
IGMP Timeout parameter 1
IKE Diffie Hellman Group parameter 1
IKE Phase 1 parameter 1
Index parameter for IDS 1
infrastructure MFP
components 1 2
Injector Switch MAC Address parameter 1
Install License button 1
inter-controller roaming
example 1 2
inter-release mobility 1
inter-subnet mobility 1
inter-subnet roaming
illustrated 1 2
Interface groups 1
Interface Name parameter 1 2
interfaces
overview 1 2
Interfaces > Edit page
creating multiple AP-manager interfaces 1
interference 1
Interference threshold parameter 1 2
Interferences 1
Internet Group Management Protocol (IGMP)
configuring
using the CLI 1
using the GUI 1
snooping 1
Interval parameter 1 2
intra-controller roaming
illustrated 1 2
Inventory page 1
Invoke Channel Update Now button 1 2
Invoke Power Update Now button 1
IP address-to-MAC address binding
described 1
IP Mask parameter 1
IPSec parameter 1
IPv6 ACL Name 1J
Japanese country codes 1K
Keep Alive Count parameter 1
Keep Alive Interval parameter 1
Key Encryption Key (KEK) parameter 1
Key Wrap Format parameter 1
Key Wrap parameter 1L
LAG Mode on Next Reboot parameter 1
Last Auto Channel Assignment parameter 1 2
Layer2 Access Control Lists > Edit page 1
Layer2 Access Control Lists > New page 1
Layer2 Access Control Lists page 1
Layer2 ACL parameter 1 2
license agent
described 1
License Commands page 1
License Detail page 1 2
licenses
installing
using the CLI 1
using the GUI 1 2
obtaining 1 2
rehosting
described 1
using the GUI 1
removing
using the CLI 1
using the GUI 1
saving
using the CLI 1
using the GUI 1
SKUs 1
viewing
using the CLI 1
Licenses page 1 2
Lifetime parameter 1
link aggregation (LAG)
described 1 2
illustrated 1
link latency
and OfficeExtend access points 1
Link Status parameter 1
link test
performing
using the CLI 1
using the GUI 1
types of packets 1
Link Test
button 1
option 1
Link Trap parameter 1
Listener Message Processing URL parameter 1
load-based CAC
enabling
using the GUI 1
Lobby Ambassador Guest Management > Guest Users List page 1
Local Management Users > New page 1
Local Management Users page 1
Local Mode AP Fast Heartbeat Timer parameter 1
local significant certificate (LSC)
configuring
using the GUI 1 2
described 1
Local Significant Certificates (LSC) - AP Provisioning page 1
Local Significant Certificates (LSC) - General page 1
local user database, capacity 1
Locally Significant Certificates 1
location
calibration 1
configuring settings using the CLI 1
viewing settings using the CLI 1
login banner file
clearing 1
described 1
downloading
using the CLI 1
using the GUI 1
logs
uploading
using the CLI 1
using the GUI 1
LSC-Only MAP Authentication using wild card MAC 1
LWAPP-enabled access points
debug commands 1
disabling the reset button 1
retrieving radio core dumps 1
sending crash information to controller 1
uploading
access point core dumps 1
radio core dumps 1 2M
MAC address of access point
displayed on controller GUI 1
MAC filtering
configuring on WLANs 1
management frame protection (MFP)
types 1 2
Management Frame Protection parameter 1 2
management frame validation 1 2
management interface
described 1
Management IP Address parameter 1
management over wireless
described 1
Master Controller Configuration page 1
Master Controller Mode parameter 1
Max HTTP Message Size parameter 1
Max RF Bandwidth parameter 1 2
maximum local database entries
configuring using the GUI 1
Maximum Local Database Entries parameter 1
Maximum Number of Sessions parameter 1
MCS data rates 1
Member MAC Address parameter 1
memory leaks, monitoring 1 2
mesh
statistics
viewing for an access point using the GUI 1
Message Authentication Code Key (MACK) parameter 1
message logs
configuring
using the GUI 1
viewing
using the CLI 1
using the GUI 1 2
Metrics Collection parameter 1
MFP Client Protection parameter 1 2
Min Failed Client Count per AP parameter 1 2
Minimum RSSI parameter 1
mobility
overview 1 2
Mobility Anchor Create button 1
Mobility Anchors option 1
mobility anchors. See <Default Para Font>auto-anchor mobility 1
mobility groups
behavior in 1
difference from RF groups 1
illustrated 1
messaging among 1
MODE access point button 1
Mode parameter 1 2
monitor intervals, configuring using the GUI 1 2
Monitoring 1
mpings 1
multicast client table, viewing 1
Multicast Groups page 1
multicast mode
described 1
guidelines 1
Multicast page 1
Multicast VLAN
using the GUI 1
multiple country codes
configuring
using the CLI 1
using the GUI 1N
NAT address
for dynamic interface 1 2
for management interface 1 2
NAT devices in mobility groups 1
Neighbor Discovery Packet 1
Neighbor Packet Frequency parameter 1 2
Network Mobility Services Protocol (NMSP)
debugging 1
modifying the notification interval for clients, RFID tags, and rogues 1
viewing settings 1
New Mobility: GUI configuration 1
NTP/SNTP server
configuring to obtain time and date 1
Number of Attempts to LSC parameter 1
Number of Hits parameter 1O
OfficeExtend Access Point Home page 1
OfficeExtend access points
and NAT 1
configuring
a personal SSID 1
using the GUI 1 2
described 1
firewall requirements 1
supported access point models 1
typical setup 1
viewing statistics 1
OfficeExtend Access Points
LEDs 1
positioning 1
OfficeExtend AP parameter 1
online help, using 1
Optimized Roaming 1
Order Used for Authentication parameter 1 2
Over-ride Global Credentials parameter 1 2
Override Interface ACL parameter 1
Overview of CleanAir 1P
packet capture files
described 1
sample output in Wireshark 1
uploading
using the CLI 1
Params parameter 1
Passive clients 1
password guidelines 1
Password parameter
for access point authentication 1
for PACs 1
passwords
viewing in clear text 1
path loss measurement (S60), CLI command 1
Physical Mode parameter 1
Physical Status parameter 1
ping link test 1
ping tests 1
PoE Status parameter 1
Port Number parameter
for controller 1
for RADIUS server 1
for TACACS+ server 1
Port parameter for IDS 1
ports
configuring 1
Ports page 1
Power Injector Selection parameter 1
Power Injector State parameter 1
Power Neighbor Count parameter 1
Power over Ethernet (PoE)
configuring
using the CLI 1
using the GUI 1
Power Over Ethernet (PoE) parameter 1
Power Threshold parameter 1
Preauthentication ACL parameter 1
Predownloading an image 1
Primary Controller parameters 1
Primary RADIUS Server parameter 1
Priority Order > Management User page 1 2
proactive key caching (PKC), with mobility 1
probe requests, described 1
product authorization key (PAK)
obtaining for license upgrade 1
registering 1
Profile Name parameter 1 2
protected access credentials (PACs)
overview 1
uploading
using the CLI 1
using the GUI 1
using with local EAP 1
Protection Type parameter 1 2 3
Protocol parameter 1 2 3
Protocol Type parameter 1 2Q
QBSS 1 2
QoS
levels 1 2 3
QoS profiles
configuring
using the CLI 1 2
using the GUI 1 2 3 4 5
QoS roles
configuring
using the CLI 1
using the GUI 1
Quality of Service (QoS) parameter 1 2
Quarantine parameter
for dynamic interface 1
quarantined VLAN
configuring 1 2
Query Interval parameter 1R
radio core dumps
described 1
uploading
using the GUI 1
radio measurement requests
configuring
on the CLI 1
on the GUI 1
overview 1
viewing status using the CLI 1
radio resource management (RRM)
configuring
monitor intervals using the GUI 1 2
coverage hole detection
configuring per controller using the GUI 1 2
described 1
debugging 1
disabling dynamic channel and power assignment
using the CLI 1
specifying channels 1 2
statically assigning channel and transmit power settings
using the GUI 1
update interval 1 2
Wireless > 802.11a/n (or 802.11b/g/n) > RRM > TPC parameter 1
radio resource management (RRM) settings
viewing using the CLI 1
radio resource monitoring 1
RADIUS
configuring on ACS 1
FIPS standard 1
KEK parameter 1
MACK parameter 1
server fallback behavior 1
using FlexConnect 1
RADIUS authentication attributes 1
RADIUS authentication attributes, Airespace 1
rc4-preference, configuring for web administration 1
Re-sync button 1
Refresh-time Interval parameter 1
Rehost Ticket File Name parameter 1
rehosting a license. See <Default Para Font>licenses 1
Remote Authentication Dial-In User Service. See<Default Para Font> RADIUS 1
Reserved Roaming Bandwidth parameter 1
Reset Personal SSID parameter 1
resetting the controller 1
RF group leader
described 1
RF group name
described 1
RF Group support 1
RF groups
cascading 1
configuring
using the GUI 1
overview 1
pinning 1
viewing status
using the CLI 1
using the GUI 1
RF-Network Name parameter 1
RFID tracking on access points, optimizing
using the GUI 1
RLDP. See <Default Para Font>Rogue Location Discovery Protocol (RLDP) 1
roam reason report 1
rogue access points
alarm 1
automatically containing
using the CLI 1
using the GUI 1
rogue detection 1 2
and OfficeExtend access points 1
Rogue Detection parameter 1 2
Rogue Location Discovery Protocol parameter 1
Rogue Policies page 1
rogue states 1
Role Name parameter 1
Role of the Controller 1
RRM. See <Default Para Font>radio resource management (RRM) 1
RSSI Low Check 1 2 3 4
RxSOP 1S
Save and Reboot button 1 2 3
Save Licenses button 1
saving configuration settings 1
Scan Threshold parameter 1
Search AP window 1
Search WLANs window 1
Secondary Controller parameters 1
Secondary RADIUS Server parameter 1
Select APs from Current Controller parameter 1
Sequence parameter 1 2 3 4
serial number for controller, finding 1
serial number of controller, finding 1
Server Address parameter 1
Server Index (Priority) parameter 1 2
Server IP Address parameter
for RADIUS server 1
for TACACS+ server 1
for wireless sniffer 1
Server Key parameter 1
Server Status parameter 1 2
Server Timeout parameter 1 2
service port 1
service-port interface
configuring
using the GUI 1 2
described 1
Set Priority button 1
Set to Factory Default button 1 2
Severity Level Filtering parameter 1
Shared Secret Format parameter 1 2
Shared Secret parameter 1 2
Short Preamble Enabled parameter 1
shunned clients
described 1
Signature Events Summary page 1
Sniff parameter 1
sniffing. See <Default Para Font>wireless sniffing 1
SNMP engine Id 1
SNMP NAC State parameter 1 2
SNMP Trap Receiver 1
SNMP v1 / v2c Community page 1
SNMP, configuring 1
software, upgrading
guidelines 1
using the CLI 1
using the GUI 1
Source parameter for ACLs 1 2 3
SpectraLink NetLink phones
overview 1
SSH
and OfficeExtend access points 1 2
configuring
using the CLI 1
troubleshooting access points
using the GUI 1 2
SSH parameter 1
SSID
configuring
using the CLI 1 2
using the GUI 1
described 1
SSL certificate
loading
using the CLI 1
using the GUI 1 2
SSL Protocol 1
SSLv2, configuring for web administration 1
State parameter 1 2
stateful DHCPv6 IP addressing 1
Status parameter
for SNMP community 1
for WLANs 1 2
Summary page 1
Switch IP Address (Anchor) parameter 1
SX/LC/T small form-factor plug-in (SFP) modules 1
Syslog Configuration page 1
Syslog Facility parameter 1
syslog server
removing from controller 1
severity level filtering 1
Syslog Server IP Address parameter 1
system logging
configuring
using the GUI 1
system logs, viewing using the CLI 1
System Resource Information page 1
system resources
viewing using the CLI 1
viewing using the GUI 1T
TACACS+
accounting 1
authentication 1
authorization 1
configuring
using the GUI 1
described 1
roles 1
TACACS+ (Authentication, Authorization, or Accounting) Servers > New page 1
TACACS+ (Authentication, Authorization, or Accounting) Servers page 1
TACACS+ Administration .csv page (on CiscoSecure ACS) 1
Telnet
troubleshooting access points
using the CLI 1
using the GUI 1 2 3
Telnet parameter 1
Telnet sessions
configuring
using the GUI 1 2
Telnet-SSH Configuration page 1
Tertiary Controller parameters 1
text2pcap sample output 1 2
Time to Live for the PAC parameter 1
time-length-values (TLVs), supported for CDP 1 2
timestamps, enabling or disabling in log and debug messages 1
traffic specifications (TSPEC) request
examples 1
traffic stream metrics (TSM)
described 1
viewing statistics
using the CLI 1
using the GUI 1
Transfer Mode parameter
downloading a CA certificate 1
downloading a configuration file 1
downloading a device certificate 1
upgrading controller software 1 2
uploading a CA certificate 1
uploading a configuration file 1
uploading a device certificate 1
uploading a PAC 1
uploading packet capture files 1
Transition Time parameter 1
transmit power
statically assigning using the CLI 1
statically assigning using the GUI 1
transmit power levels 1
transmit power threshold, decreasing 1
trap logs
for OfficeExtend access points 1
Trap Logs page 1 2
troubleshooting
access point join process 1 2
problems 1
Troubleshooting OEAPs 1
Type parameter 1 2U
U-APSD
described 1
viewing status
using the CLI 1
using the GUI 1
UDP Lite 1 2
UDP port 1
UDP, use in RADIUS 1
unicast mode 1
unique device identifier (UDI)
described 1
retrieving
using the CLI 1
using the GUI 1
Upgrade Controller Software 1
Upload button 1 2 3 4
uploading a CA certificate 1
uploading a device certificate 1
Upload CSV File parameter 1
Upload File from Controller page 1 2 3 4
uploading CA certificates 1
uploading Device certificates 1
URL to Send the Notifications parameter 1
Use AES Key Wrap parameter 1
User Access Mode parameter 1
User parameter 1
Username parameter 1
Using CLI to monitor the Air quality 1
Using GUI to monitor air quality 1
using the GUI 1V
Validate Rogue Clients Against AAA parameter 1
Validity parameter 1
VCI strings 1
virtual interface
described 1
VLAN Identifier parameter
for AP-manager interface 1
for dynamic interface 1
VLANs
described 1
guidelines 1
Voice RSSI parameter 1 2
voice settings
configuring
using the GUI 1
VoIP calls, error codes 1 2
VoIP snooping
described 1 2
VoIP Snooping and Reporting parameter 1 2W
Web Color Theme 1
web mode
described 1
Web Policy parameter 1
Web Session Timeout parameter 1
WGB parameter 1
WGB Wired Clients page 1
Wireless Backhaul Data Rate 1
wireless intrusion prevention system (wIPS)
described 1
wireless sniffing
configuring
using the GUI 1
supported software 1
Wireless Software Compatibility Matrix 1
WLAN ID parameter 1 2
WLAN SSID parameter
configuring for guest user 1
mapping an access point group to a WLAN 1 2
WLANs
creating
using the GUI 1
deleting
using the CLI 1
using the GUI 1
enabling or disabling
using the CLI 1
using the GUI 1
session timeout
described 1
viewing
using the CLI 1 2
WLANs > Edit page 1 2
WLANs page 1 2 3 4 5 6
WMM
configuring 1 2 3 4
described 1 2
with CAC 1
WMM parameter 1 2
workgroup bridges (WGBs)
debugging 1
described 1
illustrated 1 2 3
sample configuration 1
viewing status
using the CLI 1
using the GUI 1
world mode 1 2 3 4
wplus license. licenses 1
wplus license. See <Default Para Font>licenses 1