Activate IoT Service (Wired)
The following procedure shows you how to activate IoT service (wired) on your devices from the Cisco Spaces dashboard.
Before you begin
To activate IoT service (wired), here are some prerequisites.
-
Cisco Spaces: Connector
-
Cisco Catalyst 9300 or 9400 Series Switches with Cisco IOS XE Amsterdam 17.3.x and later
Note |
The workflow initiated by this procedure automatically checks for these prerequisites. |
Procedure
Step 1 |
Log in to Cisco Spaces. |
Step 2 |
From the left navigation pane, click IoT Services > About IoT Services. You can see the number of connectors activated with the IoT service (wired) service. You can also see the number of switches deployed as an IoT service (wired) gateway. Click View Detailed Status to see the breakdown of the activation status by individual devices. |
Step 3 |
In the About IoT Services window top-right corner, click Activate IoT Services. |
Step 4 |
In the Activate IoT Services window that is displayed, choose Wired. |
Step 5 |
To activate IoT service (wired) on all devices on your network, do the following: |
Step 6 |
To activate IoT service (wired) only on specific devices of your network, do the following: |
Step 7 |
To deploy a switch as a IoT service (wired) gateway, do the following: |