This command enables Traffic Optimization Data Record (TODR) generation.
Security Administrator, Administrator
Exec > ACS Configuration > Traffic Optimization Profile Configuration
active-charging service service_name > traffic-optimization-profile
Entering the above command sequence results in the following prompt:
data-record [ large-flows-only | managed-large-flows-only ] no data record
If previously configured, disables generation of TODR.
Enables the Traffic Optimization Data Record (TODR) generation
large-flows-only : Enables the traffic optimization data record generation for large flows.
managed-large-flows-only : Enables the traffic optimization data record generation for managed large flows.
The keywords - large-flows-only and managed-large-flows-only when configured along with data-record enables the CUTO library to stream the respective statistics as part of the stats-options command, to the external server. The user can configure a combination of the stats-options keywords flow-trace and flow-analyst and the data-record command to notify the CUTO library accordingly.
One of the above the two keywords can be configured as part of the data-record, which will enable the CUTO library to stream the respective statistics.
The default behavior of the data-record command is not affected with the above implementation . If it is configured without any of the options, then TODR’s will be generated for all standard and large flows, which is the existing behavior.
Use this command to generate TODR.