Inclusion of APN AMBR in the Create Session Response

Feature Information

Summary Data

Status

New Functionality

Introduced-In Release

21.2

Modified-In Release(s)

Not Applicable

Applicable Product(s)

P-GW

Applicable Platform(s)

ASR 5500

Default Setting

Enabled

Related CDETS ID(s)

CSCvd00467

Related Changes in This Release

Not Applicable

Related Documentation

Command Line Interface Reference

P-GW System Administration Guide

Statistics and Counters Reference

Revision History


Important

Revision history details are not provided for features introduced before release 21.2.


Revision Details

Release

Release Date

New in this release.

21.2

April 27, 2017

Feature Changes

Currently, APN AMBR is included in the Create Session Response even if it is not modified by the PCRF. This feature has been implemented to comply to the 3GPP specifications. With this feature, now APN AMBR will be included on the S5/S8, S4/S11, and S2a/S2b interfaces if the received APN-AMBR has been modified by the PCRF.

Previous Behavior: APN AMBR was included in Create Session Response even if it was not modified by the PCRF.

New Behavior: Now, APN AMBR will be included on the S5/S8, S4/S11, and S2a/S2b interfaces if the received APN-AMBR has been modified by the PCRF. A new CLI command has been added to enable/disable inclusion of the APN-AMBR value in the Create Session Response for the modified value received by the PCRF.


Important

P-GW supports APN-AMBR value upto 4294967 kbps.


Command Changes

egtp

Two new keywords have been added to the egtp command to enable/disable inclusion of APN-AMBR value in Create Session Response for modified value received by PCRF.


configure  
   context  context_name 
      pgw service  service_name 
         [ default | no ] egtp create-session-rsp apn-ambr-always-include  
         end  
Notes:
  • default: APN AMBR is not included in the CS Response if APN AMBR is not received from the PCRF. P-GW supports APN-AMBR value upto 4294967 kbps.

  • no: Does not include APN AMBR in the CS Response. This is the default behavior.

  • create-session-rsp: Provides an option to include APN-AMBR in the Create Session Response

  • apn-ambr-always-include: Always includes APN-AMBR IE in Create Session Response.

Performance Indicator Changes

show config

This command has been modified to display the following output:

plmn id mcc 404 mnc 00 
plmn id mcc 404 mnc 005 primary 
plmn id mcc 404 mnc 090 
fqdn host abc.net realm 3gpp.org 
dns-client context ISP1 
associate ggsn-service GGSN 
associate egtp-service PGW21EGTP 
egtp create-session-rsp apn-ambr-always-include 

show pgw-service name

This command has been modified to display the following output:

EGTP SGW Restoration Handling: Disabled 
Session Hold Timer: n/a 
Timeout: n/a 
EGTP Modify bearer cmd negotiate qos: Disabled 
EGTP GnGp Modify bearer res with APN-AMBR: Disabled 
EGTP Modify bearer res with CHARGING-ID: Disabled 
EGTP Modify bearer res with CHARGING-FQDN or CHARGING-GW-ADDRESS: Disabled 
EGTP Modify bearer res with MSISDN: Disabled 
EGTP Modify Bearer Response with Context Not Found cause if IMEI/IMEISV mismatch: Disabled 
EGTP Bit Rate in Rounded Down Kbps: Disabled 
EGTP Suppress Update Bearer Request (no bitrate change): Disabled 
EGTP Create Session Response with APN-AMBR IE: Enabled