PCC-Quota Service Configuration Mode Commands


Important
This configuration mode is supported from StarOS Release 12.1 onward.

Mode

The PCC-Quota Service Configuration mode provides a mechanism for Intelligent Policy Control Function (IPCF) to manage the external interfaces required for quota management purpose. The PCC-Quota service uses Gx interface towards PCEF/DPI node for Volume-Reporting-Over-Gx (VRoGx) for Quota management and messaging based on a Diameter dictionary. This mode exists within Context Configuration mode.

Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Quota Service Configuration

configure > context context_name > pcc-quota-service service_name


Important

The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).

associate pcc-service

This command is used to associate a pre-configured PCC-Service with a PCC-Quota service for IPCF configuration.

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Quota Service Configuration

configure > context context_name > pcc-quota-service service_name

Syntax

associate  pcc-service  pcc_service_name 
[no ] associate  pcc-service

no

Removes/disassociate the configured PCC-service from this PCC-Quota service instance configured for IPCF configuration.

pcc_service_name

Specifies the name of a pre-configured PCC-service configured in Context Configuration mode for IPCF configuration.

The pcc_service_name is name of a predefined PCC-Service instance and must be an alphanumerical string from 1 through 63 characters.

Usage Guidelines

Use this command to associate a pre-configured PCC-Service instance for IPCF configuration.


Important

For more information on PCC-Service configuration, refer PCC-Service Configuration Mode Commands.

Examples

Following command binds a PCC-Service named pcc_svc1 with in a PCC-Quota service. 
associate pcc-service  pcc_svc1
Following command removes an associated PCC-Service named pcc_svc1 from a PCC-Quota service. 
no associate pcc-service  pcc_svc1

diameter dictionary

This command is used to assign a 3GPP Rel. 8 Gx standard Diameter dictionary for VRoGx messaging with a PCC-Quota service for IPCF configuration.

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Quota Service Configuration

configure > context context_name > pcc-quota-service service_name

Syntax

[no ]diameter  dictionary  standard

no

Removes the assigned a 3GPP Rel. 8 Gx standard Diameter dictionary for VRoGx messaging with a PCC-Quota service for IPCF configuration.

Usage Guidelines

Use this command to assign a 3GPP Rel. 8 Gx standard Diameter dictionary for VRoGx messaging in PCC-Quota service for quota management.

Examples

Following command sets the PCC-Quota service to use 3GPP Rel. 8 standard dictionary over Gx interface and VRoGx supported quota management related messaging in a PCC-Quota service: 
diameter  dictionary  standard

diameter origin end-point

This command is used to bind/associate a pre-configured Diameter host/realm (SSC/SPR) over Sp interface with a PCC-Quota service to be used for subscriber quota management.

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Quota Service Configuration

configure > context context_name > pcc-quota-service service_name

Syntax

diameter  origin  endpoint  dia_endpoint_name 
no  diameter  origin  endpoint

no

Removes the associated Diameter Origin Endpoint configuration from PCC-Quota service instance configured for IPCF configuration.

any

Sets the PCC-Quota service instance to use any available PCEF/DPI node over Sp interface for quota management.

dia_endpoint_name

The dia_endpoint_name is a predefined Diameter origin endpoint node and must be an alphanumerical string from 1 through 63 characters.

Usage Guidelines

Use this command to bind the SSC/SPR node over Sp interface by associating a pre-configured Diameter Origin Endpoint with a PCC-Quota service.

The Diameter origin endpoint must be a pre-configured instance in the Context Configuration Mode. For more information on Diameter origin endpoint configuration, refer Diameter Endpoint Configuration Mode Commands chapter.

Examples

Following command associates a pre-configured Diameter endpoint node configuration named ssc1 with a PCC-Quota service for subscriber quota management. 
diameter origin endpoint ssc1
Following command removes the pre-associated Diameter endpoint node configuration named ssc1 with a PCC-Quota service. 
no diameter origin endpoint

end

Exits the current configuration mode and returns to the Exec mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

end

Usage Guidelines

Use this command to return to the Exec mode.

exit

Exits the current mode and returns to the parent configuration mode.

Product

All

Privilege

Security Administrator, Administrator

Syntax

exit

Usage Guidelines

Use this command to return to the parent configuration mode.

max total-charging-sessions

This command is used configure the maximum limit of the charging sessions allowed in a PCC-Quota service instance on IPCF.

Product

IPCF

Privilege

Security Administrator, Administrator

Mode

Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Quota Service Configuration

configure > context context_name > pcc-quota-service service_name

Syntax

max  total-charging-sessions  max_session 
default  max  total-charging-sessions

default

Sets the maximum charging sessions allowed in PCC-Quota service instance to default value of charging sessions.

max_session

Default: 1

Specifies the maximum number of charging sessions configured in PCC-Quota service to allow to be connected in PCC-Quota service instance.

max_session must be an integer between 0 and 113.

Usage Guidelines

Use this command to set the maximum number of charging sessions allowed by a PCC-Quota service instance on IPCF.

Examples

Following command sets the maximum number of charging sessions allowed in PCC-Quota service instance to 10000. 
default max total-charging-sessions