access-type
This command is used to configure the NB-IoT RAT per TAI object.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration > LTE TAI Management Database Configuration > LTE TAI Management Object Configuration
configure > lte-policy > tai-mgmt-db db_name > tai-mgmt-obj obj_name
Entering the above command sequence results in the following prompt:
[local]host_name(tai-mgmt-obj)#
Syntax
[ no ] access-type nb-iot
no
Removes the configured access type for the TAI object.
nb-iot
Configures the access type as NB-IoT for a TAI object.
Usage Guidelines
The LTE TAI Management Object Configuration Mode is used to create and manage the LTE Tracking Area Identifiers for the TAI database. This mode is used to create, remove or modify the existing LTE Tracking Area Identifier (TAI) object configurations. Use this command to configure the access type of a TAC or group of TACs as NB-IoT RAT. As per 3GPP standards, the same TAC cannot belong to both EUTRAN and NB-IoT RATs. This command is not enabled by default. The default RAT is WB-EUTRAN.
Example
access-type nb-iot