Configures the name
and PDN type of the access point name (APN) used for emergency PDN connections.
Mode
Exec > Global
Configuration > LTE Policy Configuration > LTE Emergency Profile
Configuration
configure > lte-policy > lte-emergency-profile
profile_name
Entering the above
command sequence results in the following prompt:
[local]host_name(lte-emergency-profile)#
Syntax
apn apn_name pdn-type { ipv4 | ipv4v6 | ipv6 } [ restoration-priority priority_value ]
no apn
no
Removes the selected
APN from the profile.
apn_name
apn_name specifies the name of a pre-configured
APN profile to associate with this LTE emergency profile. For more information
on APNs, refer to the
apn command in
the
Context
Configuration Mode Commands A-D chapter.
pdn-type { ipv4 | ipv4v6 | ipv6 }
Configures the
packet data network type supported by the APN and this profile.
ipv4 : Specifies that the PDN supports IPv4 network
traffic.
ipv4v6 : Specifies that the PDN supports both IPv4
and IPv6 network traffic.
ipv6 : Specifies that the PDN supports IPv6 network
traffic.
restoration-priority
priority_value
Configures the APN
restoration priority value for emergency sessions for this APN profile. The
reactivation of emergency PDNs after a P-GW restart notification is processed
in the order of this priority.
priority_value
is an integer from 1 to 16 where "1" is the highest
priority and "16" is the lowest priority. Default: 16 (lowest priority).
To define the APN
restoration priority for non-emergency sessions, refer to the
apn-restoration
command in the APN Profile Configuration Mode.
Usage Guidelines
Use this command to
select the APN to be used for emergency bearer services. APNs are configured
through the APN Configuration mode. For more information, see the
APN
Configuration Mode Commands chapter.
Example
The following
command specifies that the APN named
apn-3.com is to
be used for emergency bearer services and that the PDN supports IPv4 traffic
only:
apn apn-3.com pdn-type ipv4
The following command configures the APN Restoration Priority
for APN profile named
eap with
restoration priority value
1 :
apn eap pdn-type ipv4 restoration-priority 1