Unpacking Your Access Point

Package Contents

Each AP package contains the following items:

  • One CW9164I AP

  • Default mounting brackets: Adjustable ceiling-rail clips AIR-AP-T-RAIL-R and AIR-AP-BRACKET-1=

  • Orderable optional mounting brackets: AIR-AP-T-RAIL-F, and AIR-AP-BRACKET-2=

  • Cisco product documentation and pointer card


Note
When Cisco CW9164I-MR AP is ordered, mounting bracket AIR-AP-BRACKET-2= is included by default.

Unpacking the Access Point

Procedure

Step 1

Unpack and remove the access point and the selected mounting accessory kit from the shipping box.

Step 2

Return the packing material to the shipping container and save it for future use.
Step 3

Verify that you have received all the items you ordered. If any item is missing or is damaged, contact your Cisco representative or reseller for instructions.

Cisco Orderable Accessories

You can order the following accessories separately, from Cisco:

  • AP-mounting brackets to mount the AP

    Mounting Brackets

    Description

    AIR-AP-BRACKET-1=

    For low-profile installations

    AIR-AP-BRACKET-2=

    For electrical or network boxes above ceiling mounts

    AIR-AP-T-RAIL-F=

    Flush ceiling grid clip

    AIR-AP-T-RAIL-R=

    Recessed ceiling grid clip

    AIR-CHNL-ADAPTER=

    T-RAIL channel adapter

  • Power injectors when Power over Ethernet (PoE) is not available

    Power Supply

    Description

    AIR-PWRINJ7=

    Mid-span power injector AIR-PWRINJ7= when (PoE) is not available

    Power specifications: 50W, 56VDC

    For more information, see the power injector data sheet.

    AIR-PWRINJ6=

    A 802.3at power injector when PoE is not available

    Power Specifications: 30W, 55VDC

    For more information, see the power injector data sheet.

    MA-INJ-6-x

    Meraki 802.3bt PoE injector

    Power Specifications: 60W, 55VDC

    For more information, see the power injector data sheet.

    MA-PWR-50WAC

    DC power adapter

    Power Specifications: 50W, 54VDC