EnableVideo
|
true
false
|
Enables or disables video
capabilities.
- true (default)
- Users can make and receive video calls.
- false
- Users cannot make or receive video calls.
|
InitialPhoneSelection
|
deskphone
softphone
|
Sets the phone type for
users when the client starts for the first time. Users can change their phone
type after the initial start. The client then saves the user preference and
uses it for subsequent starts.
- deskphone
- Use the desk phone device for calls.
- softphone (default)
- Use the software phone (CSF) device for calls.
The client selects
devices in the following order:
-
Software phone devices
-
Desk phone devices
If you do not provision users with software phone devices,
the client automatically selects desk phone devices.
|
UserDefinedRemoteDestinations
|
true
false
|
Lets users add, edit, and
delete remote destinations through the client interface. Use this parameter to
change the default behavior when you provision Extend and Connect capabilities.
By default, if a user's
device list contains only a CTI remote device, the client does not let that
user add, edit, or delete remote destinations. This occurs to prevent users
from modifying dedicated remote devices that you assign. However, if the user's
device list contains a software device or a desk phone device, the client lets
users add, edit, and delete remote destinations.
- true
- Users can add, edit, and delete remote destinations.
- false (default)
- Users cannot add, edit, and delete remote destinations.
|
enableLocalAddressBookSearch
|
true
false
|
Lets users search for and
add local
Microsoft Outlook
contacts to their contact lists.
- true (default)
-
Users can search for and add local contacts to their contact
lists.
- false
-
Users cannot search for or add local contacts to their contact
lists.
|
EnableAccessoriesManager
|
true
false
|
Enables the accessories
API in the client. This API lets accessory vendors create plugins to enable
call management functionality for devices such as headsets.
- true (default)
-
Enable the accessories API.
- false
-
Disable the accessories API.
|
BlockAccessoriesManagerPlugins
|
Plugin library
|
Disables specific
Accessories Manager plugins from third party vendors such as Jabra or Logitech.
You should set the name of the plugin DLL file as the value. Use a comma to
separate multiple values, for example, on
Microsoft Windows:
<BlockAccessoriesManagerPlugins>
JabraJabberPlugin.dll,lucpcisco.dll
</BlockAccessoriesManagerPlugins>
There is no default
value.
|
ForceFontSmoothing
|
true
false
|
Specifies if the client applies anti-aliasing to smooth text.
- true (default)
-
The client applies anti-aliasing to text.
- false
-
The operating system applies anti-aliasing to text.
|
EnableBFCPVideoDesktopShare
|
true
false
|
Enables BFCP video
desktop sharing capabilities.
- true (default)
-
Enables BFCP video desktop sharing on the client.
- false
-
Disables BFCP video desktop sharing.
Note
|
BFCP video desktop sharing is enabled on the server as follows:
-
On
Cisco Unified
Communications Manager
version 8.x and lower, you must select the
Allow Presentation Sharing using BFCP checkbox.
-
On
Cisco Unified
Communications Manager
version 9.x and higher, BFCP video desktop sharing is enabled by default.
|
|
Meetings_Enabled
|
true
false
|
Enables meetings capabilities in the client. Works in
conjunction with the
CalendarIntegrationType parameter.
- true (default)
-
Enables meetings capabilities, allowing you to create meetings
and get reminders to join meetings.
- false
-
Disables meetings capabilities and user interface.
|
CalendarIntegrationType
|
0
1
|
This parameter works in conjunction with the
Meetings_Enabled parameter.
- 0
-
Disables calendar integration in the Meetings tab of the client
user interface. If you disable this parameter, the Meetings tab in the client
is empty, but the Meetings tab remains on the hub window.
- 1
-
Enables calendar integration in the Meetings tab of the client
user interface.
|
Telephony_Enabled
|
true
false
|
Enables audio and video
capabilities and user interface in the client.
- true (default)
-
Enables audio and video capabilities and user interface.
- false
-
Disables audio and video capabilities and user interface.
If you
are upgrading to this release, and your client is enabled for IM-only mode,
then you must set this parameter to false. If you do not set this parameter in
IM-only mode deployments, then users may see disabled telephony capabilities on
their user interface.
|
Voicemail_Enabled
|
true
false
|
Enables voicemail capabilities and user interface in the client.
- true (default)
-
Enables voicemail capabilities and user interface.
- false
-
Disables voicemail capabilities and user interface.
|
EnableTelProtocolHandler
|
true
false
|
Specifies if the client
registers as the protocol handler for the
tel: URI.
- true (default)
-
The client registers as the protocol handler for the
tel: URI.
- false
-
The client does not register as the protocol handler for the
tel: URI.
|
EnableSaveChatToFile
|
true
false
|
Allows users to save
their chats to the file system as HTML.
- true (default)
-
Users can save their chats to file.
- false
-
Users cannot save their chats to file.
|
EnableSIPURIDialling
|
true
false
|
Enables URI dialing with
Cisco Jabber
and allows users to make calls with URIs.
- true
-
Users can make calls with URIs.
- false (default)
-
Users cannot make calls with URIs.
|
DirectoryURI
|
Directory attribute
|
Specifies the directory
attribute that holds the SIP URI for users.
- On-Premises Deployments
-
Set one of the following as the value:
- Cloud-Based Deployments
-
Set one of the following as the value:
-
mail
-
imaddress
-
workphone
-
homephone
-
mobilephone
The
mail attribute is used by default.
Important
|
The value you specify must match the directory URI setting for
users in
Cisco Unified
Communications Manager
or the
Cisco WebEx Administration
Tool.
|
|
ForceC2XDirectoryResolution
|
true
false
|
Specifies if the client
queries the directory to resolve contact information when users perform
click-to-x actions.
- true (default)
-
The client queries the directory when users perform click-to-x
actions.
- false
-
The client does not query the directory for click-to-x actions.
Note
|
This
parameter does not take effect when users connect to the corporate network
through
Expressway for Mobile and
Remote Access.
In this case,
UDS
provides contact resolution and the client cannot query the directory.
|
|
ServiceDiscoveryExcludedServices
|
WEBEX
CUCM
CUP
|
Specifies whether to
exclude certain services from Service Discovery.
- WEBEX
-
When you set this value, the client:
-
Does not perform CAS lookup
-
Looks for
_cisco-uds,
_cuplogin, and
_collab-edge
- CUCM
-
When you set this value, the client:
- CUP
-
When you set this value, the client:
You can specify multiple,
comma-separated values to exclude multiple services. For example:
<ServiceDiscoveryExcludedServices>
WEBEX,CUCM
</ServiceDiscoveryExcludedServices>
|
VoiceServicesDomain
|
FQDN
|
Specifies the Fully
Qualified Domain Name that represents the DNS domain where the DNS SRV records
for
_collab-edge and
_cisco-uds are configured.
- Example:
-
Given the following DNS SRV records:
The
VoiceServicesDomain value would be
voice.example.com.
|