The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
The columns in the port utilization tables in this document describe the following:
A value representing the server or application and where applicable, the open or proprietary application protocol.
An identifier for the TCP or UDP port that the server or application is listening on, along with the IP address for incoming connection requests when acting as a server.
The remote application or device making a connection to the server or service specified by the protocol; or listening on the remote protocol and port.
The identifier for the TCP or UDP port that the remote service or application is listening on, along with the IP address for incoming connection requests when acting as the server.
The direction that traffic flows through the port: Inbound, Bidirectional, Outbound.
Note | The operating system dynamically assigns the source port that the local application or service uses to connect to the destination port of a remote device. In most cases, this port is assigned randomly above TCP/UDP 1024. |
Listener (Process or Application Protocol) |
Listener Protocol and Port |
Remote Device (Process or Application Protocol) |
Remote Protocol and Port |
Traffic Direction |
Notes |
---|---|---|---|---|---|
Unified Intelligence Center |
TCP 8081 |
Browser |
HTTP - Unified Intelligence Center |
||
TCP 8444 |
Browser |
HTTPS - Unified Intelligence Center |
Listener (Process or Application Protocol) |
Listener Protocol and Port |
Remote Device (Process or Application Protocol) |
Remote Protocol and Port |
Traffic Direction |
Notes |
---|---|---|---|---|---|
Platform (DB) |
TCP 1500 - 1501 |
Platform (DB) |
IDS access and replication (but not open to external access) |
||
CUIC Reporting Process |
UDP 54327 (Multicast) |
Unified Intelligence Center node |
Hazelcast Discovery |
||
CUIC Reporting Process |
TCP 57011 |
Unified Intelligence Center Node |
Hazelcast |
For more information on other port usages, see: http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-maintenance-guides-list.html