5. Cisco MGCP IP Phone Reference Guide, Version 4.0
Bias-Free Language
The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
- Updated:
- August 30, 2002
Chapter: Using the Cisco MGCP IP Phone (Version 4.0)
Using the Cisco MGCP IP Phone
This chapter describes basic Cisco MGCP IP phone functions. Your call agent or service provider might offer additional phone features and capabilities not described in this chapter. Refer to the documentation from your call agent or service provider for instructions on using those features.
This chapter includes the following sections:
•
Adjusting the Handset, Speakerphone, and Headset Volume
Using the Handset
To place and answer calls with the handset, simply lift the handset. To change from handset to speakerphone, press SPEAKER and hang up the handset.
Using the Speakerphone
To place and answer calls using the speakerphone, press SPEAKER. You can use the speakerphone with all Cisco MGCP IP phone features. To change from speakerphone to handset, lift the handset.
Using the Headset
To place and answer calls using the headset, plug the approved headset into the back of the phone base and press HEADSET.
You can use the headset with all Cisco MGCP IP Phonefeatures. The volume and mute controls also adjust volume to the ear piece and mute the speech path of the headset. The headset activation key is located on the front of the phone.
The Cisco MGCP IP Phonesupports a four- or six-wire headset jack (Plantronics H series compatible is required). For information on the exact models supported, see the Cisco MGCP IP phone information on http://cisco.getheadsets.com.
Adjusting the Handset, Speakerphone, and Headset Volume
To adjust the volume on the handset, speakerphone, or headset:
Step 1 To increase or decrease the volume of your handset, headset, or speakerphone, select the item and make it active. Press the Up or Down volume button.
The volume buttons adjust the volume for the currently active voice receiver.
Adjusting the Ringer Volume
To change the volume used by the ringer:
Step 1 Press the volume key to hear a sample ring.
Step 2 While the ring plays, press the Up or Down volume key to adjust the volume to the desired level.
Changing the LCD Contrast
To improve the readability of the LCD, change the amount of contrast:
Step 1 Press the settings button.
Step 2 Select Contrast from the Settings menu.
Step 3 Press the volume keys to set the desired intensity of the display.
Step 4 Press the BACK key to accept your changes.
Muting a Call
While on a call, you can mute the handset, headset, or speakerphone, preventing the party you are speaking to from hearing what you or someone else in the room is saying.
•To mute a call, press MUTE.
•To disengage mute, press MUTE again.
Feedback