Manager Status screen, by default, refreshes when a change in a manager’s
status occurs or when there is a new call for a manager.
StpUpdt button prevents this automatic refresh.
use this button, for example, if you have support 33 managers and
would like to change the setting for the 20th manager.
scroll down the manager list on the Manager Status screen, highlight the 20th
name, and press Select.
if your screen gets updated during this time, you would lose your place in the
scroll list, as well as miss potentially important status updates. Therefore,
to avoid refreshes from occurring in such a situation, press the StpUpdt
re-invoke the automatic updates, press the StrUpdt button.