Cisco Unified Real-Time Monitoring Tool Administration Guide

Bias-Free Language

The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.

Book Contents
Find Matches in This Book
Available Languages
Download Options

Book Title

Cisco Unified Real-Time Monitoring Tool Administration Guide

Chapter Title

Profiles and Categories

Results

Updated:
February 1, 2023

Chapter: Profiles and Categories

Profiles and Categories

Profiles

This section describes about how to add, restore, and delete the configuration profile.

Add Configuration Profile

With RTMT, you can customize your monitoring window by monitoring different performance counters and then create your own configuration profiles. You can restore these monitoring windows in a single step rather than opening each window again.

You can switch between different profiles during the same RTMT session or use the configuration profile in subsequent RTMT sessions.

Follow this procedure to create a profile.

Procedure

Step 1

Choose File > Profile.

The Preferences dialog box appears.

Step 2

Click Save.

The Save Current Configuration dialog box appears.

Step 3

In the Configuration name field, enter a name for this particular configuration profile.

Step 4

In the Configuration description field, enter a description of this particular configuration profile.

Note 

Profiles apply to all nodes within a cluster, but you cannot save and apply the profile to a different cluster.

The system creates the new configuration profile.

Restore Configuration Profile

Perform the following procedure to restore a profile that you configured:

Procedure

Step 1

Choose File > Profile.

The Preferences dialog box appears.

Step 2

Click the profile that you want to restore.

Step 3

Click Restore.

All windows with precanned settings or performance monitoring counters for the restored configuration open.

Delete Configuration Profile

Perform the following procedure to delete a profile that you configured:

Procedure

Step 1

Choose File > Profile.

The Preferences dialog box appears.

Step 2

Click the profile that you want to delete.

Step 3

Click Delete.

Step 4

Click Close.

Categories

Add Category

Follow this procedure to add a category.

Procedure

Step 1

Go to the applicable window for your configuration:

Unified Communications Manager

Choose System > Performance > Open Performance Monitoring.

Unified Communications Manager IM and Presence Service

Choose System > Performance > Open Performance Monitoring.

Cisco Unity Connection

Choose System > Performance > Open Performance Monitoring.

Step 2

Choose Edit > Add New Category.

Step 3

Enter the name of the category; click OK.

The category tab appears at the bottom of the window.

Rename Category

To rename a category, perform the following procedure:

Procedure

Step 1

Perform one of the following tasks:

  1. Right-click the category tab that you want to rename and choose Rename Category.

  2. Click the category tab that you want to rename and choose Edit > Rename Category.

Step 2

Enter the new name and click OK.

The renamed category displays at the bottom of the window.

Delete Category

To delete a category, perform one of the following tasks:

  • Right-click the category tab that you want to delete and choose Remove Category.

  • Click the category tab that you want to delete and choose Edit > Remove Category.

Was this Document Helpful?

FeedbackFeedback

Contact Cisco