The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
CAR provides reporting capabilities for three levels of users: administrators, managers, and individual users. Only administrators generate device reports.
Device reports track the load and performance of Cisco Unified Communications Manager related devices, such as conference bridges, voice-messaging servers, gateways, and trunks.
Only CAR administrators generate the trunk reports. The following section describes how to configure Trunk Utilization reports.
Only CAR administrators generate the Trunk Utilization report. This report calculates the utilization reports for devices based on the duration of calls that passed through the devices.
You can generate this report on an hourly, daily, or monthly basis. The system calculates the utilization of a trunk for each hour in the selected date range. For example, the system calculates the utilization of a trunk between 11hrs-12hrs, using the formula, (Sum of the duration of calls that used the trunk in that hour / (total seconds in an hour * maximum number of ports in a trunk * number of days between the fromDate and toDate selected) * 100).
Similarly, to get the utilization for each day in a week, the system calculates the utilization using the formula, ((sum of the duration of calls that used the trunk in a day) / (total seconds in each day * number of each day between the fromDate and toDate selected * maximum number of ports in a trunk) * 100).
In the case of monthly utilization reports, the system calculates the utilization for each day in a month, using the formula, ((sum of the duration of calls that used the trunk in a day) / (total seconds in each day * number of each day between the fromDate and toDate selected * maximum number of ports in a trunk) * 100).
Reports generate for each trunk that is chosen.
For calculation of the trunk utilization, the system uses the port numbers from the CAR Trunk Configuration window. To find this window, choose . You cannot take port details for H.323 trunks from the Cisco Unified Communications Manager database because the H.323 port number always equals zero in the database. The user must update H.323 trunk ports information in the CAR Trunk Configuration window.
Be aware that the only port detail information that is taken from the CAR Trunk Configuration window is only for those trunks that do not have port details that are available or that show zero in the Cisco Unified Communications Manager database.
This section describes how to generate, view, or mail Trunk Utilization reports.
Step 1 |
Choose . The Trunk Utilization window displays. |
||||||||||
Step 2 |
In the Generate Reports field, choose a time as described in the following table.
|
||||||||||
Step 3 |
To display the list of trunks that you can include in the report in the List of Trunks box, perform one of the following tasks:
|
||||||||||
Step 4 |
Choose a trunk type from the list. The trunk name displays in the List of Trunks box.
|
||||||||||
Step 5 |
In the List of Trunks box, choose the trunks that you want to include in the report.
|
||||||||||
Step 6 |
To move the chosen trunk to the list of Selected Trunks box, click the down arrow. The trunk(s) that you chose displays in the Selected Trunks box. |
||||||||||
Step 7 |
If you chose Generate New Report, enter the date range of the period for which you want to see call information.
|
||||||||||
Step 8 | If you want the report in CSV format, choose CSV (comma separated value) in the Report Format area. If you want the report in PDF format, choose PDF (portable document format) in the Report Format area. | ||||||||||
Step 9 |
Click the View Report button. The report displays. |
||||||||||
Step 10 | If you want to mail the report, click the Send Report button. To send the report, perform the procedure that is described in the Mail reports. |