The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
If you deployed a Cisco Unified Communications Manager cluster, the Edit and Expand Cluster support feature in Cisco Prime Collaboration Deployment eliminates migration issues and barriers. You can perform the following actions:
Add IM and Presence Service to an existing Unified Communications Manager cluster.
Add new nodes to the existing cluster—for example, add subscriber nodes.
Select nodes from a cluster to perform installation.
This feature works with only a previously installed 10.x or later system and uses the Fresh Install Task to add the nodes.
Note | After you add and install new nodes to an existing cluster, if you later perform the Discovery task, the entire cluster with the new nodes is discovered. |
This feature makes the installation process seamless and promotes simplified cluster installation from Cisco Prime Collaboration Deployment. The touchless installation proceeds without the requirement to provide any subscriber details in the installation task. Subscribers are not dependent on the installation of the publisher. This feature has the following benefits:
If you are installing Cisco Unified Communications Manager between Releases 10.0(1) and 10.5(1), the task is paused after publisher node is installed completely. You must enter details of subscriber nodes into the publisher node before you manually start the next step. Cisco Unified Communications Manager Release 10.5(2) onward does not pause during a fresh installation; the install task continues automatically.
For information about supported releases for Cisco Prime Collaboration Deployment, see Supported Releases.
For information about direct upgrade paths, see the Cisco Unified Communications Manager Software Compatibility Matrix at the following URL: http://www.cisco.com/c/en/us/support/unified-communications/unified-communications-manager-callmanager/products-device-support-tables-list.html.
For upgrade and migration information that is not covered in the above references (for example, upgrading from Release 4.x), see the Drive to Collaboration site at the following URL: http://www.cisco.com/web/solutions/vnlanding/comm_manager_upgrade.html.
Product and Functions |
Cluster Discovery |
Migration to 10.x Cluster |
Upgrade Task (Upgrade Application Server or Install COP Files) |
Restart Task |
Switch Version Task |
Fresh Install a new or Edit/Expand an existing 10.x Cluster |
Readdress Task (Change Hostname or IP Addresses for One or More Nodes in a Cluster) |
---|---|---|---|---|---|---|---|
Cisco Unified Communications Manager |
6.1(5), 7.1(3), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 8.6(2), 9.0.(1), 9.1(1), 9.1(2), 10.0(1), 10.5(1), 10.5(2) |
6.1(5), 7.1(3), 7.1(5), 8.0(1), 8.0(2), 8.0(3), 8.5(1), 8.6(1), 8.6(2), 9.0.(1), 9.1(1), 9.1(2), 10.0(1), 10.5(1), 10.5(2) |
8.6(1), 8.6(2), 9.0.(1), 9.1(1), 9.1(2), 10.0(1), 10.5(1), 10.5(2) |
8.6(1), 8.6(2), 9.0.(1), 9.1(1), 9.1(2), 10.0(1), 10.5(1), 10.5(2) |
8.6(1), 8.6(2), 9.0.(1), 9.1(1), 9.1(2), 10.0(x), 10.5(1), 10.5(2) |
10.x, 10.5(1), 10.5(2) |
10.x |
Cisco Unified Presence |
8.5, 8.6 |
8.5(4), 8.6(3), 8.6(4), 8.6(5) |
8.6(3), 8.6(4), 8.6(5) |
8.6(3), 8.6(4), 8.6(5) |
8.6(3), 8.6(4), 8.6(5) |
— |
— |
IM and Presence Service |
9.0(1), 9.1(1), 10.x |
9.0(1), 9.1(1), 10.x |
9.0(1), 9.1(1), 10.x |
9.0(1), 9.1(1), 10.x |
9.0(1), 9.1(1), 10.x |
10.x, 10.5(1), 10.5(2) |
Not Supported |
Cisco Unified Contact Center Express |
8.5.1, 9.0, 9.0.2, and 10.x |
Not Supported |
9.0(2), 10.x |
9.0(2), 10.x |
9.0(2), 10.x |
10.5(x) |
10.5(x) |
Cisco Unity Connection |
8.6.1, 8.6.2, 9.x and 10.x |
Not Supported |
From 8.6(x) to 8.6(x) From 8.6(x) to 9.x From 9.x to 9.x From 10.0(1) to 10.x |
8.6(1), 8.6(2), 9.x, 10.x |
8.6(1), 8.6(2), 9.x, 10.x |
10.5(x) |
10.5(x) |
Note | The supported releases table does not include the Engineering Special (ES)/ Service Update (SU) versions. To upgrade or migrate to ES/SU versions, see the release notes of the corresponding product, such as IM and Presence, Cisco Unified Communications Manager, and Unity. |
From |
To |
Task Types Supported |
---|---|---|
Export Restricted (K9) |
Export Restricted (K9) |
Supported for Upgrade paths Supported for Migration paths |
Export Restricted (K9) |
Export Unrestricted (XU) |
Not supported for Upgrade paths Supported for Migration paths |
Export Unrestricted (XU) |
Export Restricted (K9) |
Not supported for Upgrade paths Not supported for Migration paths |
Export Unrestricted (XU) |
Export Unrestricted (XU) |
Supported for Upgrade paths Supported for Migration paths |