These Release Notes describe the updates and fixes in version 7.5.5b of the Cisco Small Business SPA30X and SPA50X IP Phones firmware.
As with any firmware release, read these release notes before upgrading the firmware. Cisco also recommends backing up configuration before any firmware upgrade.
When upgrading a Cisco SPA50X or Cisco SPA30X IP phone, if you have installed a firmware version prior to 7.5.2b, you must first upgrade to 7.5.2b before you upgrade to release 7.5.3 or to a later release. See the following table for more information.
If you are upgrading using an upgrade rule, the following example can be used to upgrade successfully:
where “lt” means “less than” and the command is entered in a single line. For more information on the upgrade rule, including a syntax description, see the Upgrade Rule section in the Cisco Small Business IP Telephony Devices Provisioning Guide, Chapter 2, beginning on page 44.
Anything that degrades network performance can affect voice and video quality, and in some cases, can cause a call to drop. Sources of network degradation can include, but are not limited to, the following activities:
To reduce or eliminate any adverse effects to the devices, schedule administrative network tasks during a time when the devices are not being used or exclude the devices from testing.
www.cisco.com/en/US/support/tsd_cisco_small_business _support_center_contacts.html |
|
www.cisco.com/go/smallbizfirmware Select a link to download firmware for Cisco Small Business Products. No login is required. |
|
Regulatory Compliance and Safety Information for the Cisco SPA300 Series and Cisco SPA500 Series IP Phones |
http://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/csbpipp/ip_phones/regulatory_compliance/guide/rcsi_SPA300_SPA500.pdf |
Cisco Partner Central for Small Business (Partner Login Required) |
|