Cisco BTS 10200 Softswitch

HTTP-FS (HTTP Feature Server) -- Optional Component

HTTP-FS Information - Cisco BTS 10200 Softswitch

Cisco BTS 10200 Softswitch – Release 4.5.x

Select a link from the list below to find task-oriented procedures and other information you need to set up and use the HTTP Feature Server.

HTTP Feature Server (HTTP-FS) General Description:

HTTP-FS Technical Overview The HTTP-FS is an optional component of the Cisco BTS 10200 Softswitch. The HTTP-FS is composed of two subcomponents, the GUI Feature Server (GUI-FS) and the Mini-Browser Adapter (MBA).

Diagram Showing the HTTP-FS Place in the Architecture of the Cisco BTS 10200 Softswitch This diagram shows both the GUI-FS and MBA subcomponents of the HTTP-FS component.

Diagram Showing the MBA in the Internal Network of the Cisco BTS 10200 Softswitch This diagram shows how the IP ports on the MBA connect to the Catalyst Ethernet switches in the Cisco BTS 10200 Softswitch internal network.

Procedures for Setting Up the HTTP-FS:

Hardware and Software Requirements for Using the HTTP-FS Specification for the hardware and operating system required for the MBA. See the "Optional Component (Hardware and Software)" subsection.

Cabling the MBA The MBA requires two connections (one signaling connection and one management connection) to the Catalyst Ethernet switch. Attach the cables according to “Appendix A: Cable List” in the Cabling, VLAN, and IRDP Setup Procedure.

Installing MBA Software The MBA software is included in the software package supplied with your Cisco BTS 10200 Softswitch. Install this software according to the “Installing the Mini-Browser Adaptor (MBA) Application on another machine” section in the Application Installation Procedure.

Enabling SIP-Phone Services Procedure for enabling SIP-phone services via interfaces on the GUI-FS, MBA, and SIP phone.

Additional HTTP-FS Resources:


Return to main page.

Copyright 2008 Cisco Systems, Inc. All rights reserved.