Managing File Backups and Management Data Exports and Imports


This chapter provides procedures for managing file backups and management data.

This chapter includes the following sections:

Restoring the Cisco VNMC Software to the Backup Configuration

Working With File Backups

Working With Management Data Exports and Imports

Restoring the Cisco VNMC Software to the Backup Configuration

To restore the Cisco VNMC software to the backup configuration, follow these steps:


Step 1 Install the Cisco VNMC virtual machine (VM).

For details, see the Cisco Virtual Security Gateway, Release 4.2(1)VSG1(1) and Cisco Virtual Network Management Center, Release 1.0.1 Installation Guide.

Step 2 Uninstall the Cisco VSG policy agents.

Connect the Secure Shell to the Cisco VSG console for this task. This step does not cause a traffic disruption.

vsg# conf t
vsg (config)# vnm-policy-agent
vsg (config-vnm-policy-agent)# no policy-agent-image

Note Perform this step for all Cisco VSGs that are associated with the Cisco VNMC that you are restoring.


Step 3 Uninstall the VSM policy agents.

Connect the Secure Shell to the VSM console for this task. This step does not cause a traffic disruption.

vsm# conf t
vsm (config)# vnm-policy-agent

vsm (config-vnm-policy-agent)# no policy-agent-image


Note Perform this step for all VSMs that are associated with the Cisco VNMC you are restoring.


Step 4 Restore the Cisco VNMC database.

Connect the Secure Shell to the Cisco VNMC CLI for this task. Depending upon your Cisco VNMC backup location, restore using File Transfer Protocol (FTP), Secure Copy (SCP), Trivial File Transfer Protocol (TFTP), or Secure File Transfer Protocol (SFTP).

vnmc# connect local-mgmt
vnmc(local-mgmt)# restore scp:[//[username@]server][/path]

Step 5 In the Cisco VNMC GUI, choose Administration > Service Registry > Clients, and in the Work pane proceed with the following steps:

a. Wait until each registered VSM displays the operational status as lost-visibility.

b. Choose each VSM, and click the Delete Client icon.

Step 6 In the Cisco VNMC GUI, choose Resource Management > Resources > Virtual Supervisor Modules, and verify that the deleted VSMs are not visible.

Step 7 Reinstall the VSM policy agents.


Note If the VSM policy agents must be upgraded, install the new software now.


VSM# conf t
VSM (config)# vnm-policy-agent 
VSM (config-vnm-policy-agent)# policy-agent-image bootflash:vnmc-vsmpa.1.0.1g.bin

Step 8 Wait until all the VSMs have registered in the Service Registry and are displayed under Resource Management > Resources > Virtual Supervisor Modules.

Step 9 Reinstall the Cisco VSG policy agents.


Note If the Cisco VSG policy agents must be upgraded, install the new software now.


VSG# conf t
VSG (config)# vnm-policy-agent 
VSG (config-vnm-policy-agent)# policy-agent-image bootflash:vnmc-vsgpa.1.0.1g.bin

Step 10 Verify the following states after the restore process is complete:


Note The restore process could take a few minutes depending upon your setup environment.


a. On the Cisco VSG CLI, verify that your configurations are restored to their earlier state.

b. On the Cisco VNMC GUI, verify that your objects and policies are restored to their earlier state.


Working With File Backups

This section includes the following topics:

Creating File Backups

Deleting File Backups

Displaying File Backups

Enabling File Backups

Disabling File Backups

Working With File Backup Attributes

Creating File Backups

You can create a file backup.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. create backup {ftp:<//user@location/file> | scp:<//user@location/file> | sftp:<//user@location/file> | tftp:<//server:port/path>} full-state {disabled | enabled}

3. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

create backup


Example:

vnmc /system # create backup ftp://de@test/testfile full-state enabled

Creates a file backup.

Step 3 

commit-buffer


Example:

vnmc /system/backup* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to create a file backup:

vnmc# scope system
vnmc /system # create backup ftp://de@test/testfile full-state enabled

Password:
vnmc /system/backup* # commit-buffer
vnmc /system/backup # 

Deleting File Backups

You can delete a file backup.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. delete backup <file-backup-name>

3. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

delete backup


Example:

vnmc /system # delete backup testfile

Deletes the file backup.

Step 3 

commit-buffer


Example:

vnmc /system* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to delete a file backup:

vnmc# scope system
vnmc /system # delete backup testfile
vnmc /system* # commit-buffer
vnmc /system # 

Displaying File Backups

You can display a list of file backups.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. show backup

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

show backup


Example:

vnmc /system # show backup

Displays a list of file backups.

EXAMPLES

This example shows how to display a list of file backups:

vnmc# scope system
vnmc /system # show backup

Backup:
    Hostname   Type           User       Protocol Administrative State Description
    ---------- -------------- ---------- -------- -------------------- -----------
    test       Full State     testOne    Ftp      Ensabled
    testTwo    Full State     testTwo    Ftp      Enabled
vnmc /system # 

Enabling File Backups

You can enable a file backup.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope backup <file-backup-name>

3. enable

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope backup


Example:

vnmc /system # scope backup testfile

Places you in backup mode.

Step 3 

enable


Example:

vnmc /system/backup # enable

Enables the backup.

Step 4 

commit-buffer


Example:

vnmc /system/backup* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to enable a file backup:

vnmc# scope system
vnmc /system # scope backup testfile
vnmc /system/backup # enable

Password:
vnmc /system/backup* # commit-buffer
vnmc /system/backup # 

Disabling File Backups

You can disable a file backup.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope backup <file-backup-name>

3. disable

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope backup


Example:

vnmc /system # scope backup testfile

Places you in backup mode.

Step 3 

disable


Example:

vnmc /system/backup # disable

Disables the backup.

Step 4 

commit-buffer


Example:

vnmc /system/backup* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to disable a file backup:

vnmc# scope system
vnmc /system # scope backup testfile
vnmc /system/backup # disable

Password:
vnmc /system/backup* # commit-buffer
vnmc /system/backup # 

Working With File Backup Attributes

This section contains the following topics:

Setting the Description Attribute for File Backups

Setting the Password Attribute for File Backups

Setting the Protocol Attribute for File Backups

Setting the Remote File Prefix Attribute for File Backups

Setting the Type Attribute for File Backups

Setting the User Attribute for File Backups

Setting the Description Attribute for File Backups

You can set the description attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope backup <file-backup-name>

3. set descr <description>

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope backup


Example:

vnmc /system # scope backup testfile

Places you in backup mode.

Step 3 

set descr


Example:

vnmc /system/backup # set descr testAll

Sets the description attribute.

Step 4 

commit-buffer


Example:

vnmc /system/backup* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the description attribute:

vnmc# scope system
vnmc /system # scope backup testfile
vnmc /system/backup # set descr testAll
vnmc /system/backup* # commit-buffer
vnmc /system/backup # 

Setting the Password Attribute for File Backups

You can set the password attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope backup <file-backup-name>

3. set password

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope backup


Example:

vnmc /system # scope backup testfile

Places you in backup mode.

Step 3 

set password


Example:

vnmc /system/backup # set password

Sets the password attribute.

Step 4 

commit-buffer


Example:

vnmc /system/backup* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the password attribute:

vnmc# scope system
vnmc /system # scope backup testfile
vnmc /system/backup # set password

Password:
vnmc /system/backup # 

Setting the Protocol Attribute for File Backups

You can set the protocol attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope backup <file-backup-name>

3. set protocol

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope backup


Example:

vnmc /system # scope backup testfile

Places you in backup mode.

Step 3 

set protocol


Example:

vnmc /system/backup # set protocol tftp

Sets the protocol attribute.

Step 4 

commit-buffer


Example:

vnmc /system/backup* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the protocol attribute:

vnmc# scope system
vnmc /system # scope backup testfile
vnmc /system/backup # set protocol tftp
vnmc /system/backup* # commit-buffer
vnmc /system/backup # 

Setting the Remote File Prefix Attribute for File Backups

You can set the remote file prefix attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope backup <file-backup-name>

3. set remote-file-prefix

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope backup


Example:

vnmc /system # scope backup testfile

Places you in backup mode.

Step 3 

set remote-file-prefix


Example:

vnmc /system/backup # set remote-file-prefix a

Sets the remote file prefix attribute.

Step 4 

commit-buffer


Example:

vnmc /system/backup* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the remote file prefix attribute:

vnmc# scope system
vnmc /system # scope backup testfile
vnmc /system/backup # set remote-file-prefix a
vnmc /system/backup* # commit-buffer
vnmc /system/backup # 

Setting the Type Attribute for File Backups

You can set the type attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope backup <file-backup-name>

3. set type

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope backup


Example:

vnmc /system # scope backup testfile

Places you in backup mode.

Step 3 

set type


Example:

vnmc /system/backup # set type full-state

Sets the type attribute.

Step 4 

commit-buffer


Example:

vnmc /system/backup* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the type attribute:

vnmc# scope system
vnmc /system # scope backup test
vnmc /system/backup # set type full-state
vnmc /system/backup* # commit-buffer
vnmc /system/backup # 

Setting the User Attribute for File Backups

You can set the user attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope backup <file-backup-name>

3. set user

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope backup


Example:

vnmc /system # scope backup testfile

Places you in backup mode.

Step 3 

set user


Example:

vnmc /system/backup # set user techs

Sets the user attribute.

Step 4 

commit-buffer


Example:

vnmc /system/backup* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the user attribute:

vnmc# scope system
vnmc /system # scope backup testfile
vnmc /system/backup # set user techs
vnmc /system/backup* # commit-buffer
vnmc /system/backup # 

Working With Management Data Exports and Imports

This section includes the following topics:

Creating Management Data Export Services

Deleting Management Data Export Services

Displaying Management Data Export Services

Enabling Management Data Export Services

Disabling Management Data Export Services

Creating Management Data Import Services

Deleting Management Data Import Service

Displaying Management Data Import Services

Enabling Management Data Import Services

Working With Management Data Attributes

Creating Management Data Export Services

You can create VNMC management data export services.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS-

1. scope system

2. create export {ftp:<//user@location/file> | scp:<//user@location/file> | sftp:<//user@location/file> | tftp:<//server:port/path>} {config-all | config-logical | config-system} {disabled | enabled}

3. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

create export


Example:

vnmc /system # create export ftp://de@test/PA12 config-all enabled

Enables the management data export service.

Step 3 

commit-buffer


Example:

vnmc /system* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to create a management data export service:

vnmc# scope system
vnmc /system # create export ftp://de@test/PA12 config-all enabled

Password:
vnmc /system/export* # commit-buffer

Deleting Management Data Export Services

You can delete a management data export service.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. delete export <export-name>

3. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

delete export


Example:

vnmc /system # delete export PA12

Deletes the export service.

Step 3 

commit-buffer


Example:

vnmc /system* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to delete a management data export service:

vnmc# scope system
vnmc /system # delete export PA12
vnmc /system* # commit-buffer
vnmc /system # 

Displaying Management Data Export Services

You can display a list of export services.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. show export

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

show export


Example:

vnmc /system # show export

Displays a list of export services.

EXAMPLES

This example shows how to display a list of export services:

vnmc# scope system
vnmc /system # show export

Management Data Export:
    Hostname   User       Protocol Data Export Type Administrative State Description
    ---------- ---------- -------- ---------------- -------------------- -----------
    PA11       test       Ftp      Config System    Enabled
    PA13       test       Ftp      Config All       Enabled
vnmc /system # 

Enabling Management Data Export Services

You can enable management data export services.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope export <export-name>

3. enable

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope export


Example:

vnmc /system # scope export PA12

Places you in export mode.

Step 3 

enable


Example:

vnmc /system/export # enable

Enables management data export services.

Step 4 

commit-buffer


Example:

vnmc /system/export* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to enable a management data export service:

vnmc# scope system
vnmc /system # scope export PA12
vnmc /system/export # enable

Password:
vnmc /system/export* # commit-buffer
vnmc /system/export # 

Disabling Management Data Export Services

You can disable management data export services.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope export <export-name>

3. disable

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope export


Example:

vnmc /system # scope export PA12

Places you in export mode.

Step 3 

disable


Example:

vnmc /system/export # disable

Disables management data export services.

Step 4 

commit-buffer


Example:

vnmc /system/export* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to enable a management data export service:

vnmc# scope system
vnmc /system # scope export PA12
vnmc /system/export # disable

Password:
vnmc /system/export* # commit-buffer
vnmc /system/export # 

Creating Management Data Import Services

You can create a VNMC management data import service.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. create import {ftp: | scp: | sftp: | tftp:} {merge | replace} {disabled | enabled}

3. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

create import


Example:

vnmc /system # create import ftp://de@test/PA13 replace enabled

Enables the management data import service.

Step 3 

commit-buffer


Example:

vnmc /system* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to create a management data import service:

vnmc# scope system
vnmc /system # create import ftp://de@test/PA13 replace enabled

Password:
vnmc /system/import* # commit-buffer
vnmc /system/import # 

Deleting Management Data Import Service

You can delete the management data import service.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. delete import <import-name>

3. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

delete import


Example:

vnmc /system # delete import PA13

Deletes the import service.

Step 3 

commit-buffer


Example:

vnmc /system* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to delete the import service:

vnmc# scope system
vnmc /system # delete import PA13
vnmc /system* # commit-buffer
vnmc /system # 

Displaying Management Data Import Services

You can display a list of import services.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. show import

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

show import


Example:

vnmc /system # show import

Displays a list of import services.

EXAMPLES

This example shows how to display a list of import services:

vnmc# scope system
vnmc /system # show import

Management Data Import:
    Hostname   User       Protocol Data Import Action Administrative State Description
    ---------- ---------- -------- ------------------ -------------------- -----------
    PA12       test       Ftp      Replace            Enabled
    PA14       test       Ftp      Replace            Enabled
vnmc /system # 

Enabling Management Data Import Services

You can enable management data import services.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope import <import-name>

3. enable

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope import


Example:

vnmc /system # scope import PA13

Places you in import mode.

Step 3 

enable


Example:

vnmc /system/import # enable

Enables management data import services.

Step 4 

commit-buffer


Example:

vnmc /system/import* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to enable a management data import service:

vnmc# scope system
vnmc /system # scope import PA13
vnmc /system/import # enable

Password:
vnmc /system/import* # commit-buffer
vnmc /system/import # 

Disabling Management Data Import Services

You can disable management data import services.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope import <import-name>

3. disable

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope import


Example:

vnmc /system # scope import PA13

Places you in import mode.

Step 3 

disable


Example:

vnmc /system/import # disable

Disables management data import services.

Step 4 

commit-buffer


Example:

vnmc /system/import* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to disable a management data import service:

vnmc# scope system
vnmc /system # scope import PA13
vnmc /system/import # disable

Password:
vnmc /system/import* # commit-buffer
vnmc /system/import # 

Working With Management Data Attributes

This section includes the following topics:

Setting the Action Attribute for Imports

Setting the Description Attribute for Exports and Imports

Setting the Password Attribute for Exports and Imports

Setting the Protocol Attribute for Exports and Imports

Setting the Remote File Prefix Attribute for Exports and Imports

Setting the Type Attribute for Exports and Imports

Setting the User Attribute for Exports and Imports

Setting the Action Attribute for Imports

You can set the action attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope import <export-name>

3. set action

4. commit-buffer

DETAILED STEPS

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope import


Example:

vnmc /system # scope import PA13

Places you in import mode.

Step 3 

set action


Example:

vnmc /system/import # set action merge

Sets the action attribute.

Step 4 

commit-buffer


Example:

vnmc /system/import* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the action attribute:

vnmc# scope system
vnmc /system # scope import PA13
vnmc /system/import # set action merge
vnmc /system/import* # commit-buffer
vnmc /system/import # 

Setting the Description Attribute for Exports and Imports

You can set the description attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope export <export-file-name> | scope import <import-file-name>

3. set descr <description>

4. commit- buffer

DETAILED STEPS (export mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope export


Example:

vnmc /system # scope export PA12

Places you in export mode.

Step 3 

set descr


Example:

vnmc /system/export # set descr testA

Sets the description attribute.

Step 4 

commit-buffer


Example:

vnmc /system/export* # commit-buffer

Commits (saves) the configuration.

DETAILED STEPS (import mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope import


Example:

vnmc /system # scope import PA13

Places you in import mode.

Step 3 

set descr


Example:

vnmc /system/import # set descr testA

Sets the description attribute.

Step 4 

commit-buffer


Example:

vnmc /system/import* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the description attribute in export mode:

vnmc# scope system
vnmc /system # scope export PA12
vnmc /system/backup # set descr testA
vnmc /system/backup* # commit-buffer
vnmc /system/backup* # 

Setting the Password Attribute for Exports and Imports

You can set the password attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope export <export-file-name> | scope import <import-file-name>

3. set password

4. commit-buffer

DETAILED STEPS (export mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope export


Example:

vnmc /system # scope expor PA12

Places you in export mode.

Step 3 

set password


Example:

vnmc /system/export # set password

Sets the password attribute.

Step 4 

commit-buffer


Example:

vnmc /system/export* # commit-buffer

Commits (saves) the configuration.

DETAILED STEPS (import mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope import


Example:

vnmc /system # scope import PA13

Places you in import mode.

Step 3 

set password


Example:

vnmc /system/import # set password

Sets the password attribute.

Step 4 

commit-buffer


Example:

vnmc /system/import* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the password attribute in import mode:

vnmc# scope system
vnmc /system # scope import PA13
vnmc /system/import # set password

Password:
vnmc /system/import # 

Setting the Protocol Attribute for Exports and Imports

You can set the protocol. attribute

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope export <export-file-name> | scope import <import-file-name>

3. set protocol

4. commit-buffer

DETAILED STEPS (export mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope export


Example:

vnmc /system # scope export PA12

Places you in export mode.

Step 3 

set protocol


Example:

vnmc /system/export # set protocol ftp

Sets the password attribute.

Step 4 

commit-buffer


Example:

vnmc /system/export* # commit-buffer

Commits (saves) the configuration.

DETAILED STEPS (import mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope import


Example:

vnmc /system # scope import PA13

Places you in import mode.

Step 3 

set protocol


Example:

vnmc /system/import # set protocol ftp

Sets the protocol attribute.

Step 4 

commit-buffer


Example:

vnmc /system/import* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the protocol attribute in import mode:

vnmc# scope system
vnmc /system # scope import PA13
vnmc /system/import # set protocol ftp
vnmc /system/import* # commit-buffer
vnmc /system/import # 

Setting the Remote File Prefix Attribute for Exports and Imports

You can set the protocol.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope export <export-file-name> | scope import <import-file-name>

3. set remote-file-prefix

4. commit-buffer

DETAILED STEPS (export mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope export


Example:

vnmc /system # scope export PA12

Places you in export mode.

Step 3 

set remote-file-prefix


Example:

vnmc /system/export # set remote-file-prefix test

Sets the remote file prefix attribute.

Step 4 

commit-buffer


Example:

vnmc /system/export* # commit-buffer

Commits (saves) the configuration.

DETAILED STEPS (import mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope import


Example:

vnmc /system # scope import PA13

Places you in import mode.

Step 3 

set remote-file-index


Example:

vnmc /system/import # set remote-file-index test

Sets the remote file index attribute.

Step 4 

commit-buffer


Example:

vnmc /system/import* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the remote file prefix attribute in export mode:

vnmc# scope system
vnmc /system # scope export PA12
vnmc /system/export # set remote-file-prefix test
vnmc /system/export* # commit-buffer
vnmc /system/export # 

Setting the Type Attribute for Exports and Imports

You can set the type attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope backup <file-backup-name> | scope export <export-file-name>

3. set type

4. commit-buffer

DETAILED STEPS (export mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope export


Example:

vnmc /system # scope export PA12

Places you in export mode.

Step 3 

set type


Example:

vnmc /system/export # set type full-state

Sets the type attribute.

Step 4 

commit-buffer


Example:

vnmc /system/export* # commit-buffer

Commits (saves) the configuration.

DETAILED STEPS (import mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope import


Example:

vnmc /system # scope import PA13

Places you in import mode.

Step 3 

set type


Example:

vnmc /system/import # set type full-state

Sets the type attribute.

Step 4 

commit-buffer


Example:

vnmc /system/import* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the type attribute in export mode:

vnmc# scope system
vnmc /system # scope export PA12
vnmc /system/backup # set type full-state
vnmc /system/backup* # commit-buffer
vnmc /system/backup # 

Setting the User Attribute for Exports and Imports

You can set the user attribute.

BEFORE YOU BEGIN

See VNMC CLIs Basic Commands, page 1-5 for basic information about the VNMC CLI.

CLI

Management controller

SUMMARY STEPS

1. scope system

2. scope export <export-file-name> | scope import <import-file-name>

3. set user

4. commit-buffer

DETAILED STEPS (export mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope export


Example:

vnmc /system # scope export PA12

Places you in export mode.

Step 3 

set user


Example:

vnmc /system/export # set user techs

Sets the user attribute.

Step 4 

commit-buffer


Example:

vnmc /system/export* # commit-buffer

Commits (saves) the configuration.

DETAILED STEPS (import mode)

 
Command
Purpose

Step 1 

scope system


Example:

vnmc# scope system

Places you in system mode.

Step 2 

scope import


Example:

vnmc /system # scope import PA13

Places you in import mode.

Step 3 

set user


Example:

vnmc /system/import # set user techs

Sets the user attribute.

Step 4 

commit-buffer


Example:

vnmc /system/import* # commit-buffer

Commits (saves) the configuration.

EXAMPLES

This example shows how to set the user attribute in import mode:

vnmc# scope system
vnmc /system # scope import PA13
vnmc /system/import # set user techs
vnmc /system/import* # commit-buffer
vnmc /system/import #