The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
This chapter includes the following sections:
You can install Cisco UCS Central, release 2.0 in the Standalone Mode.
The standalone installation enables you to install Cisco UCS Central on a virtual machine in the same way as the releases prior to release 1.3.
When you upgrade Cisco UCS Central to release 2.0, you can upgrade to a standalone mode.
 Important |
Before upgrading Cisco UCS Central, make sure the registered domains are upgraded to the supported Cisco UCS Manager release version. Cisco UCS Central, release 2.0 requires Cisco UCS Manager, release 2.1(2) or newer. If you do not upgrade Cisco UCS Manager before upgrading Cisco UCS Central, any registered Cisco UCS domains will stop receiving updates from Cisco UCS Central after the upgrade. Before upgrading Cisco UCS Central to 2.0 you must do the following:
|
For supported upgrade options, requirements and procedures, see b_Cisco_UCSC_Install_and_Upgrade_Guide_2_0_chapter_0110.html#concept_53AFACE3D39743409C0E464ECAB53AEB.
Feedback