Viewing Server Sensors

Viewing Temperature Sensors

Procedure

  Command or Action Purpose

Step 1

Server# scope sensor

Enters sensor command mode.

Step 2

Server /sensor # show temperature [detail]

Displays temperature sensor statistics for the server.

Example

This example displays temperature sensor statistics:

Server# scope sensor
Server /sensor # show temperature
Name             Sensor Status  Reading    Units  Critical  Min Critical Max  Non-Recoverable Min  Non-Recoverable Max
--------------   -------------- ---------- ------ --------  ----------------  -------------------- ---------------------
TEMP_SENS_FRONT   Normal         23.0       C       N/A          60.0          N/A                  70.0
TEMP_SENS_REAR    Normal         29.0       C       N/A          75.0          N/A                  85.0


Server /sensor #

Viewing Voltage Sensors

Procedure

  Command or Action Purpose

Step 1

Server# scope sensor

Enters sensor command mode.

Step 2

Server /sensor # show voltage [detail]

Displays voltage sensor statistics for the server.

Example

This example displays voltage sensor statistics:

Server# scope sensor
Server /sensor # show voltage
Name    	Sensor Status   Reading  Units  Critical Min  Critical Max  Non-Recoverable Min  Non-Recoverable Max
-------------------------------------------------------------------------------------------------------------------
P12V      	Normal        12.803      V        11.151       13.806       11.151               13.806
P0V6_SB_BMC      Normal        0.601      V        0.569        0.632        0.569                0.632
P5V_SB           Normal        5.031      V        4.493        5.499        4.493                5.499
P2V5_SB          Normal        2.516      V        2.375        2.621        2.375                2.621
P3V3_SB          Normal        3.350      V        2.970        3.634        2.970                3.634
P0V86_SB_C827    Normal        0.858      V        0.819        0.905        0.819                0.905
P2V5_SB_ABC      Normal        2.492      V        2.375        2.750        2.375                2.750
P1V8_VCCIN       Normal        1.790      V        1.615        2.071        1.615                2.071
P1V8_SB          Normal        1.802      V        1.622        1.981        1.622                1.981
P1V1_SB_BMC      Normal        1.100      V        1.022        1.209        1.022                1.209
P1V2_DDR4_VDD    Normal        1.225      V        1.076        1.318        1.076                1.318
P1V8_SB_NACDELAY Normal        1.802      V        1.622        1.981        1.622                1.981
P1V2_SB          Normal        1.193      V        1.139        1.264        1.139                1.264
P1V_PCIE4        Normal        0.998      V        0.897        1.100        0.897                1.100
P1V05_SB         Normal        1.061      V        0.952        1.162        0.952                1.162
P0V74_SB_VNN     Normal        0.850      V        0.608        1.209        0.608                1.209
P1V8_SB_PHY      Normal        1.786      V        1.622        1.981        1.622                1.981
P1V_SB           Normal        0.991      V        0.952        1.053        0.952                1.053
P0V6_DDR4_ABC    Normal        0.605      V        0.538        0.659        0.538                0.659
P3V3_SB_MCU      Normal        3.318      V        2.812        3.792        2.812                3.792
Server /sensor #

Viewing LED Sensors

Before you begin

The server must be powered on, or the information will not display.

Procedure

  Command or Action Purpose

Step 1

Server# scope chassis

Enters chassis command mode.

Step 2

Server /chassis # show led [detail]

Displays the name, state, and color of the external LEDs.

Example

This example displays information about the external LEDs:

Server# scope chassis
Server /chassis # show led
LED Name                  LED State  LED Color
------------------------- ---------- --------
LED_PWR_BTN               ON         GREEN
LED_HLTH_STATUS           ON         GREEN
LED_SYS                   ON         GREEN
LED_BMC_ACT               ON         GREEN
OVERALL_DIMM_STATUS       ON         GREEN

Server /chassis # show led detail
LEDs:
    LED Name: LED_PWR_BTN
    LED State: ON
    LED Color: GREEN
    
LEDs:
    LED Name: LED_HLTH_STATUS
    LED State: ON
    LED Color: GREEN
    
LEDs:
    LED Name: LED_SYS
    LED State: ON
    LED Color: GREEN
    
LEDs:
    LED Name: LED_BMC_ACT
    LED State: ON
    LED Color: GREEN
    
LEDs:
    LED Name: OVERALL_DIMM_STATUS
    LED State: ON
    LED Color: GREEN