Need an account?

Create an account

Help

Cisco IMC Supervisor Rack-Mount Servers Management Guide, Release 2.0

Book Contents

Find Matches in This Book

Available Languages

Download Options

Book Title

Cisco IMC Supervisor Rack-Mount Servers Management Guide, Release 2.0

Chapter Title

Getting Started

PDF - Complete Book (3.24 MB) PDF - This Chapter (1.41 MB)
View with Adobe Reader on a variety of devices
ePub - Complete Book (514.0 KB)
View in various apps on iPhone, iPad, Android, Sony Reader, or Windows Phone
Mobi - Complete Book (875.0 KB)
View on Kindle device or Kindle app on multiple devices

Results

Updated:: August 29, 2016

Chapter: Getting Started

Getting Started

This chapter contains the following topics:

Overview
Launching Cisco IMC Supervisor
Licensing Tasks
Authentication and LDAP Integration
Configuring LDAP
Configuring a SCP User
Configuring Mail Setup
Branding
Configuring User Interface Settings

Overview

The following figure illustrates the workflow to setup your environment using Cisco IMC Supervisor:

Launching Cisco IMC Supervisor

Perform this procedure to log in to Cisco IMC Supervisor.

Before You Begin

Verify if Cisco IMC Supervisor is installed successfully.
Ensure you have the IP address configured during the Cisco IMC Supervisor installation.

Procedure

Type the Cisco IMC Supervisor IP address in any browser URL and log in with the following credentials:

User Name - admin
Password - admin

Licensing Tasks

You can use the License menu to view the license details and the usage of resources. The following licensing procedures are available from Administration > License menu.

Tab	Description
License Keys	This tab displays the details of the license used in Cisco IMC Supervisor. You can also use this tab to upgrade the license. You can upgrade the license when a new version of Cisco IMC Supervisor is available,
License Utilization	This tab shows the licenses in use and details about each license, including license limit, available quantity, status, and remarks. License audits can also be run from this page.
Resource Usage Data	This tabs displays the details of the various resources used.

Updating the License
Running License Audit

Updating the License

You must perform the following procedure to update the license before you start using Cisco IMC Supervisor. For the list of valid licenses, see About Licenses. You must generate a license key, claim and register the Product Access Key. After installing Cisco IMC Supervisor, the license is validated and you can start using Cisco IMC Supervisor.

Before You Begin

If you received a zipped license file by email, extract and save the .lic file to your local machine.

Procedure

Step 1	From the menu bar, choose Administration > License.
Step 2	Select the License Keys tab.
Step 3	Click Update License.
Step 4	In the Update License dialog box, do one of the following: To upload a .lic file, click Browse, navigate to and select the .lic file, then click Upload. For a license key, check the Enter License Text check box then copy and paste the license key only into the License Text field. The license key is typically at the top of the file, after Key `->`. You can also copy and paste the full text of a license file into the License Text field.
Step 5	Click Submit. The license file is processed, and a message appears confirming the successful update.

Running License Audit

Perform this procedure when you want run license audits.

Before You Begin

The license should be updated. To upgrade the license, refer Updating the License.

Procedure

Step 1	From the menu bar, choose Administration > License.
Step 2	Click the License Utilization tab.
Step 3	Click Run License Audit.
Step 4	In the Run License Audit dialog box, click Submit. This process takes some time to complete.
Step 5	In the confirmation dialog box, click OK.

Authentication and LDAP Integration

You can configure an authentication preference with a fallback choice for LDAP. You can also configure a preference with no fallback for Verisign Identity Protection (VIP) authentication.

Name	Description
Local First, fallback to LDAP	Authentication is done first at the local server (Cisco IMC Supervisor). If the user is unavailable at the local server, the LDAP server is checked.
Verisign Identity Protection	VIP Authentication Service (two-factor authentication) is enabled.

Configuring Authentication Preferences

Configuring Authentication Preferences

Perform this procedure when you want to change the login authentication type.

Procedure

Step 1	From the menu bar, choose Administration > Users and Groups.
Step 2	Choose the Authentication Preferences tab
Step 3	From the Authentication Preferences drop-down list, you can choose one of the following options: Local First, fallback to LDAP If you select this option, then you must configure LDAP servers. For more information, see Configuring LDAP Servers. Verisign Identity Protection— If you select this option, continue to the next step.
Step 4	If you select Verisign Identity Protection, complete the following steps: Click Browse to upload a VIP certificate. Locate and select the certificate, and click Upload. Enter the Password.
Step 5	Click Save.

Configuring LDAP

Configuring LDAP in Cisco IMC Supervisor involves adding LDAP configurations and configuring LDAP servers. You can also test the LDAP connectivity and view LDAP summary information. The following sections explain how to perform these procedures.

LDAP Integration Rules and Limitations
Adding LDAP Configurations
Configuring LDAP Servers
Viewing LDAP Server Summary Information
Testing LDAP Server Connectivity
Searching BaseDN
Requesting Manual LDAP Sync
Viewing LDAP Synchronized Results
Modifying LDAP Server Details
Deleting LDAP Server Information

LDAP Integration Rules and Limitations

User Synchronization Rules

If a chosen LDAP user already exists in Cisco IMC Supervisor and the source is type Local, the user is ignored during synchronization.
If a chosen LDAP user already exists in Cisco IMC Supervisor and the source type is External, the user’s name, description, email, and other attributes are updated for use.
If a user account is created in two different LDAP directories, then the user details of the LDAP directory that was synchronized first is displayed. The user details from the other LDAP directory is not displayed.
After LDAP directories are synchronized, the LDAP external users must login to Cisco IMC Supervisor by specifying the complete domain name along with the user name. For example, vxedomain.cisco.com\username.

User Synchronization Limitations

If a user has multiple group membership, that user has single group membership in Cisco IMC Supervisor.

Note

Ensure that the user is assigned to the correct group after the LDAP synchronization process.

Adding LDAP Configurations

Perform this procedure to add LDAP configurations.

Procedure

Step 1

From the menu bar, choose Administration > Users and Groups.

Step 2

Choose the LDAP Integration tab.

Step 3

Click + to add LDAP configurations.

Step 4

In the Add LDAP Configurations dialog box, complete the following fields:

Field	Description
Account Name field	An LDAP account name.
Server Type drop-down list	Choose either Microsoft Active Directory or Open LDAP.
Server field	Host name or the IP address of the server.
Enable SSL check box	Enables a secure connection to the LDAP server.
Port field	The port number. It is automatically set to 636 for SSL, and 389 for non-secure mode.
Domain Name field	The domain name for the LDAP user.
Username field	Enter a name for the LDAP user.
Password field	Enter a password associated with the username.
Synchronization Freqency drop-down list	Select the frequency (hours) at which the LDAPserver must be synchronized. It can be one of the following: 1 4 12 24

Step 5

Click Next.

Step 6

In the LDAP Search Base dialog box, click Select and choose search criteria for retrieving users based on OU from the table displayed.

Note

Cisco IMC Supervisor supports only users and not groups. Search criteria is not mandatory based on OU as it can have both users as well as groups. The system sync up task runs every 24 hours and syncs up LDAP users based on the search criteria. Hence, you must perform a manual sync of only user information. To perform a manual LDAP sync, refer Requesting Manual LDAP Sync.

Step 7

Click Select in the Select dialog box.

The search criteria you have selected is displayed next to the Search Base field.

Step 8

Click Next in the LDAP Search Base dialog box.

Step 9

Click + to add entry to user role filters table in the LDAP User Role Filter dialog box.

Step 10

Enter the user role details in the Add Entry to User Role Filters dialog box.

Step 11

Click Submit.

Step 12

In the Submit Result dialog box, click OK.

You can edit or delete these filters. You can also use the up or down arrows to move the filters to set priority.

Step 13

Click Submit in the LDAP User Role Filter dialog box.

Step 14

In the Submit Result dialog box, click OK.

Configuring LDAP Servers

You can configure multiple LDAP servers and accounts in Cisco IMC Supervisor. While adding LDAP accounts, you can specify the following:

An organization unit (OU) that is part of the search base DN.
A frequency at which the LDAP account is automatically synchronized with the system.
A group or user filter to narrow down the results, and specify an LDAP role filter on the groups and users

Soon after an LDAP server account is added, a system task for this account is created automatically, and it immediately begins to synchronize the data. All the users and groups in the LDAP server account are added to the system. By default, all the users from the LDAP account are automatically assigned to the service end-user profile. Perform this procedure to configure LDAP servers.

Before You Begin

You should have set the authentication preferences for Local First, fallback to LDAP.

Procedure

Step 1

On the menu bar, choose Administration > Users and Groups.

Step 2

Choose the LDAP Integration tab.

Step 3

Click Add.

Step 4

In the LDAP Server Configuration dialog box, complete the following fields:

Name	Description
Account Name field	The name of the account. This name must be unique.
Server Type field	The type of LDAP server. It can be one of the following: OpenLDAP MSAD - Microsoft Active Directory
Server field	The IP address or the host name of the LDAP server.
Enable SSL check box	Enables a secure connection to the LDAP server.
Port field	The port number. It is automatically set to 636 for SSL, and 389 for non-secure mode.
Domain Name field	The domain name. If you selected OpenLDAP as the LDAP Directory Type, then this domain name must match the domain specified with the user name. Important: You must specify the complete domain name. For example, vxedomain.com.
User Name field	The user name. If you selected OpenLDAP as the LDAP Directory Type, then specify the user names in the following format: uid=users,ou=People,dc=ucsd,dc=com where ou specified is the one all the other users are placed in the directory hierarchy.
Password field	The user password.
Synchronization Frequency drop-down list	Select the frequency (hours) at which the LDAP server must be synchronized. It can be one of the following: 1 4 12 24

Step 5

Click Next.

Step 6

In the LDAP Search Base pane, click Select to specify LDAP search base entries and click Select.

All organization units (OU) that are available in Cisco IMC Supervisor are displayed in this list.

Step 7

Click Next.

Step 8

In the Configure User and Group Filters pane, complete the following fields:

Name	Description
User Filters	Click the + sign to select specific users that must be synchronized with the system. All groups that the selected users are part of are retrieved and added into the system.
Group Filters	Click the + sign to select groups that must be synchronized with the system. All users that are part of the selected group filters are retrieved and added into the system. However, if the users in the selected group are also part of other groups, then those groups are not retrieved and added to the system unless they are selected for this field.
Add Entry to User Filters or Add Entry to Group Filters dialog box (displayed based on your previous selection)
Attribute Name drop-down list	Choose either Group Name or User Name.
Operator drop-down list	Choose the filter to retrieve groups and users. It can be one of the following: Equals to Starts with
Attribute Value field	Specify a keyword or a value that must be included in the search.

Based on the filters, the groups or users are retrieved.

Step 9

Click Next.

Step 10

In the LDAP User Role Filter pane, click the + sign to add a user role filter.

Step 11

In the Add Entry to User Role Filters dialog box, complete the following fields:

Name	Description
Attribute Name field	The name of the attribute. It can be Group Name.
Operator drop-down list	It can be one of the following: Equal to Starts with
Attribute Value field	Specify a value in this field. All users that match the values of the Operator field and the Attribute Value field are assigned to the user role you select in the Map User Role drop-down list.
Map User Role drop-down list	Select a user role that you want the users mapped to. You can choose a role that was available by default, or you can choose a role that you created in the system. Following are the roles that are available by default in Cisco IMC Supervisor: Group Admin Operator System Admin

Step 12

Click Submit.

Step 13

Click OK.

The user role filters are added to the User Role Filters table.

Note

If you have multiple user role filters specified, then the filter specified in the first row is processed.

If you manually update the user role for a user from the Login Users tab, then the user role that you mapped the group is no longer applied on the user.

What to Do Next

If you have not set the authentication preference to LDAP, then you are prompted to modify the authentication preference. For more information on changing the authentication preference, see Configuring Authentication Preferences.

Viewing LDAP Server Summary Information

Perform this procedure to view the summary information of the LDAP server.

Procedure

Step 1	From the menu bar, choose Administration > Users and Groups.
Step 2	Choose the LDAP Integration tab.
Step 3	Choose an LDAP account name from the table.
Step 4	Click View. The View LDAP Account Information dialog box displays summary information of the LDAP account.
Step 5	Click Close.

Testing LDAP Server Connectivity

Perform this procedure to text the LDAP connection.

Procedure

Step 1	From the menu bar, choose Administration > Users and Groups.
Step 2	Choose the LDAP Integration tab.
Step 3	Choose an LDAP account name from the table.
Step 4	Click Test Connection. The status of the connection is displayed.
Step 5	Click Close in the Test LDAP Connectivity dialog box.

Searching BaseDN

Perform this procedure to search the BaseDN.

Procedure

Step 1

From the menu bar, choose Administration > Users and Groups.

Step 2

Click the LDAP Integration tab and select an LDAP account.

Step 3

Click Search BaseDN.

Note

Cisco IMC Supervisor supports only users and not groups. Search criteria is not mandatory based on OU as it can have both users as well as groups.

Step 4

Click Select in the LDAP Search Base dialog box.

Step 5

Choose one or more users and click Select in the Select dialog box.

Step 6

Click Submit in the LDAP Search Base dialog box.

Step 7

In the Submit Result dialog box, click OK.

Requesting Manual LDAP Sync

Requesting manual LDAP synchronization enables you to specify either basic or advanced search criteria to retrieve LDAP users and groups. Perform this procedure for manual LDAP synchronization.

Procedure

Step 1

From the menu bar, choose Administration > Users and Groups.

Step 2

Click the LDAP Integration tab and select an LDAP account.

Step 3

Click Request Manual LDAP Sync.

Step 4

In the Manual LDAP Sync dialog box, complete the following fields:

Name	Description
Basic Search check box	Enables basic search by organization unit.
Advanced Search check box	Enables advanced search.

Note

When you use either of the search options, if the users and groups already exist in Cisco IMC Supervisor, then the same users and groups are not populated after performing the search.

Step 5

For basic search, click Select to specify the search base.

Step 6

Choose the search base DN, and click Select and continue to Step 9.

Step 7

For advanced search, in the Advanced Filtering Options pane, add or edit attribute names for User Filters and Group Filters.

Step 8

Click Next.

Step 9

In the Select Users and Groups dialog box, complete the following fields:

Name	Description
LDAP Groups field	The LDAP groups from which the users must be synchronized.
LDAP Users field	The LDAP users that must be synchronized.

Step 10

Click Submit.

Step 11

In the Submit Result dialog box, click OK to synchronize the LDAP server.

From the menu bar, choose Administration > Users and Groups and click Users tab to see the synchronized users.

Viewing LDAP Synchronized Results

Perform this procedure to view the LDAP synchronized results.

Procedure

Step 1	From the menu bar, choose Administration > Users and Groups.
Step 2	Click the LDAP Integration tab and select an LDAP account.
Step 3	Click Results.
Step 4	Click the License Status tab to view the validity of the Cisco IMC Supervisor license.
Step 5	Click the LDAP Integration tab to view the details such as the start and end time of LDAP synchronization, status of synchronization and a detailed message of the status.

Modifying LDAP Server Details

You can only modify the following details for a configured LDAP server:

Port numbers and SSL configuration
User name and password
Search BaseDN selections

Perform the following procedure to modify the LDAP server details.

Procedure

Step 1

From the menu bar, choose Administration > Users and Groups.

Step 2

Click the LDAP Integration tab and select an LDAP account.

Step 3

Click Modify.

Step 4

In the Modify LDAP Server Configuration dialog box, edit the following fields:

Name	Description
Enable SSL check box	Enables a secure connection to the LDAP server.
Port field	The port number. It is automatically set to 636 for SSL, and 389 for non-secure mode.
User Name field	The user name. If you selected OpenLDAP as the LDAP Directory Type, then specify the user names in the following format: uid=users,ou=People,dc=ucsd,dc=com where ou specified is the one all the other users are placed in the directory hierarchy.
Password field	The user password.

Step 5

Click Next.

Step 6

In the LDAP Search Base dialog box, click Select to specify LDAP search base entries and click Select.

Step 7

Click Next.

Step 8

In the Configure User and Group Filters pane, select and edit the required attributes in the User Filters and Group Filters table.

Step 9

Click Next.

Step 10

In the LDAP User Role Filter dialog box, click add, edit, delete, or move table entries using up and down arrows.

Step 11

Click Submit in the respective dialog boxes.

Step 12

In the Submit Result dialog box, click OK.

Step 13

Click Submit in the LDAP User Role Filter dialog box.

Step 14

In the Submit Result dialog box, click OK.

Deleting LDAP Server Information

Deleting an LDAP server account only results in deleting the search criteria, BaseDNs, and system entries related to this LDAP server. Users attached to the LDAP server are not deleted. Perform this procedure to delete the LDAP server information.

Procedure

Step 1	From the menu bar, choose Administration > Users and Groups.
Step 2	Choose the LDAP Integration tab.
Step 3	Choose an LDAP account name from the table.
Step 4	Click Delete.
Step 5	In the confirmation dialog box, click Delete.
Step 6	Click OK. This initiates the deletion of the LDAP account in Cisco IMC Supervisor. Based on the number of users in the LDAP account, this deletion process could take a few minutes to complete. During such time, the LDAP account may still be visible in Cisco IMC Supervisor. Click Refresh to ensure that the account has been deleted.

Configuring a SCP User

SCP user is used by server diagnostics and tech support upload operations for transferring file to the Cisco IMC Supervisor appliance using SCP protocol. An scp user account cannot be used to login to the Cisco IMC Supervisor UI or the shelladmin. Perform this procedure for configuring scp user password.

Procedure

Step 1	From the menu bar, choose Administration > Users and Groups.
Step 2	Click the SCP User Configuration tab.
Step 3	Enter the scp user password in the Password field.
Step 4	Click Submit.
Step 5	In the Submit Result dialog box, click OK.

Configuring Mail Setup

All outgoing emails from Cisco IMC Supervisor require an SMTP server. Cisco IMC Supervisor generated emails such as alerts for faults and so on are sent to the mail setup you have configured using the following procedure. For more information about adding email alert rules, see Adding Email Alert Rules for Server Faults.

Procedure

Step 1

From the menu bar, choose Administration > System.

Step 2

Click the Mail Setup tab.

Step 3

In the Mail Setup pane, complete the following fields:

Field	Description
Outgoing Email Server (SMTP)	IP address of the server or the domain name.
Outgoing SMTP Port	Port number for the SMTP server.
Outgoing SMTP User	(Optional) The outgoing SMTP user ID to use for SMTP authentication.
Outgoing SMTP Password	(Optional) The password for the outgoing SMTP user ID to use for SMTP authentication.
Outgoing Email Sender Email Address	The From address of the outgoing Cisco IMC Supervisor generated emails.
Server IP Address	IP address of the server running Cisco IMC Supervisor.
Send Test Email checkbox	Check this check box to send a test email to the configured address.

Step 4

Click Save.

Step 5

In the confirmation dialog box, click OK.

Branding

A login page can be configured to display a logo that is associated with a domain name. When the end user logs in from that domain, the user sees the custom logo on the login page. The optimal image size for a logo is 890 pixels wide and 470 pixels high, with 255 pixels allowed for white space. Cisco recommends that you keep the image size small to enable faster downloads.

Adding New Login Branding Page

Adding New Login Branding Page

Perform this procedure when you want to add a new login branding page.

Procedure

Step 1

From the menu bar, choose Administration > Users and Groups.

Step 2

Click the Login Page Branding tab.

Step 3

Click Add.

Step 4

In the Domain Branding dialog box, complete the following:

Field

Description

Domain Name field

A domain name for branding. For example, imcs.xxxx.com.

Note

For creating a domain name in your local machine, navigate to C:\Windows\System32\drivers\etc and specify the <ipaddress> and <domainname> in the hosts file. For example, 10.10.10.10 imcs.xxxx.com.

Custom Domain Logo checkbox

(Optional) If you want to add a logo, check this checkbox and do the following:

Click Browse.
Navigate to a logo and choose the file.
Click Open.

Step 5

Click Submit.

Step 6

In the confirmation dialog box, click OK.

Note

You can edit, delete, and clone the customized login page you have created.

Configuring User Interface Settings

You can use this procedure to customize the Cisco IMC Supervisor application. You can modify the application header, the administrator and end-user portal based on your requirement. The header containing the logo, application name, and links such as logout can also be hidden.

Procedure

Step 1

From the menu bar, choose Administration > User Interface Settings.

Step 2

In the User Interface Settings window, complete the following:

Field	Description
Hide Entire Header check box	Use this check box to enable or disable the header.
Product Name field	Main title of the header.
Product Name 2nd Line field	Sub-title of the header.
Enable About Dialog checkbox	Use this checkbox to enable or disable the About dialog box for Cisco IMC Supervisor.
Administrator Portal
Custom Link 1 Lable field	You can configure this field to change the text on header bar.
Custom Link 1 URL field	You can configure the URL for the Custom Link 1 Lable
Custom Link 2 Lable field	You can configure this field to change the text on header bar.
Custom Link 2 URL field	You can configure the URL for the Custom Link 2 Lable
End-user Portal
Custom Link 1 Lable field	You can configure this field to change the text on header bar.
Custom Link 1 URL field	You can configure the URL for the Custom Link 1 Lable
Custom Link 2 Lable field	You can configure this field to change the text on header bar.
Custom Link 2 URL field	You can configure the URL for the Custom Link 2 Lable

Step 3

Click Save.

Step 4

In the confirmation dialog box, click OK.

Was this Document Helpful?

Feedback

Contact Cisco

Open a Support Case
(Requires a Cisco Service Contract)

Cisco IMC Supervisor Rack-Mount Servers Management Guide, Release 2.0

Results

Chapter: Getting Started

Getting Started

Overview

Launching Cisco IMC Supervisor

Licensing Tasks

Updating the License

Running License Audit

Authentication and LDAP Integration

Configuring Authentication Preferences

Configuring LDAP

LDAP Integration Rules and Limitations

Adding LDAP Configurations

Configuring LDAP Servers

Viewing LDAP Server Summary Information

Testing LDAP Server Connectivity

Searching BaseDN

Requesting Manual LDAP Sync

Viewing LDAP Synchronized Results

Modifying LDAP Server Details

Deleting LDAP Server Information

Configuring a SCP User

Configuring Mail Setup

Branding

Adding New Login Branding Page

Configuring User Interface Settings

Was this Document Helpful?

Contact Cisco

Related Cisco Community Discussions

Share