border ip address
Configures the IP address of the fabric border device.
This command was introduced.
Use this command to configure the IP address of the fabric border device. Border devices in the fabric domain connect traditional Layer 3 networks or different fabric domains to the local domain, and translate reachability and policy (VRF and SGT ) information from one domain to another. Fabric border devices correspond to proxy egress tunnel routers in LISP.
This command auto-generates LISP configuration, to orchestrate the fabric overlay. The show-running configuration command shows the fabric domain configuration including the auto-generated commands.
The following configuration is auto-generated when this command is run on your device:
ipv4 use-petr 198.51.100.4 priority 10 weight 10
For information about the ipv4 proxy etr command, see LISP Command Reference..