The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language.
Caveats describe unexpected behavior in a product. The Open Caveats section lists open caveats that apply to the current release and may apply to previous releases. A caveat that is open for a prior release and is still unresolved applies to all future releases until it is resolved.
To view the details of the software bugs pertaining to your product, perform the following task:
The corresponding Bug Search Tool window is displayed with details of the Caveat ID/Bug ID.
The Bug Search Tool (BST), which is the online successor to the Bug Toolkit, is designed to improve the effectiveness in network risk management and device troubleshooting. The BST allows partners and customers to search for software bugs based on product, release, and keyword, and aggregates key data, such as bug details, product, and version. The tool has a provision to filter bugs based on credentials to provide external and internal bug views for the search input.
To view the details of a caveat whose ID you do not have, perform the following procedure:
For more information about how to use the Cisco Bug Search Tool effectively, including how to set email alerts for bugs and to save bugs and searches, see Bug Search Tool Help & FAQ.
This chapter lists the Open and Resolved Caveats in Cisco DCNM, and contains the following section:
Cisco DCNM, Release 10.0(1)ST1, Caveats
The following table lists the Resolved bugs for Cisco DCNM, Release 10.0(1)ST(1).
Caveat ID Number |
Description |
---|---|
Need support for multiple NTP servers |
|
‘clock protocol ntp’ cause parsing error |
|
POAP templates do not set timezone |
|
DCNM - Not allowed to select platform type |
|
Inconsistent show vlans when doing “show run” leads to POAP diff |
|
Vxlan IS-IS underlay: medium P2P missing on numbered links (Nexus 5K) |
|
Vxlan IS-IS underlay: medium P2P missing on numbered links (Nexus 7K) |
|
N7k BL and BS -L2 PO and L2 phy int port-l2dci cmd needs to be removed |
|
IPFabric BorderPELeaf: provide option to set BFD for the MPLS global IGP |
|
Diff Conformance: Interface loopback diff (shutdown) |
|
IPFabric_VDC_BorderPELeaf_v02: Diff Conformance |
|
Diff conformance for loopback interfaces on N56XX spine node (IP Fabric) |
|
Remove Vpc peer-gateway |
|
Boolean Mandatory values show red (mandatory) asterisk next to checkbox |
|
Base_N7K_AdminVDC_10_0_1a copp policy |
|
10.0.01a: questions on rmon event configuration |
|
IPFabric_VDC_BorderPELeaf 1a -impacts N7K with MPLS handoff |
|
“feature ISIS” enabled when OSPF is used |
|
MTU qos policy “jumboAndFCOE” is not attached |
|
vpc defintion and description inconsistency |
|
Diff conformance for “no feature telnet” |
|
TME feedback page vpc defintion and description inconsistency |
|
Vxlan IS-IS underlay: medium P2P should always be there |
|
N6k: see diffs for loopback interfaces except loopback 0 |
|
remove 'fabric forwarding port-l2dci' from IPFabric N6k templates |
|
POAP: “feature ospf”missing in templates |
|
POAP:“switchback” needs to be removed at the end of vrf-tenant-profile |
|
POAP:“VPC Keep-alive IP Netmask Length” field mandatory in vdc BS |
|
Fabric_N7K_BorderLeaf_10_0_1_ST_0_10 has two manageability tabs |
|
$$OU_BASE$$ missing in N7k POAP leaf templates |
|
Fabric Templates don't have triggers to enable/disable listed feature. |
|
N7K:CLI errors in backbone VLAN configs in Spine template |
|
N7k:NTP and AAA syntax error in POAP in FP |
|
Only single instance of router bgp config is required in 7K templates |
|
feature-set fabric, feature fabric forwarding missing on spine |
|
POAP: All interfaces of vdc Edge using default mtu |
|
POAP:- vdc BL template : BL-ER PC subintf cfgs error |
|
POAP: VDP configs on Leaf template |
|
Qos configs getting pushed for mentioned Fabric VDC POAP Templates. |
|
Username-Password syntax error in fabric BorderPE templates |
|
POAP: Add port number for vCenter connections |
|
POAP: switchport CLI need in some N9K |
The following table lists the Open bugs for Cisco DCNM, Release 10.0(1)ST(1).
Caveat ID Number |
Description |
---|---|
Extra exits showing up in diff file |
|
Diff detected after POAP on N9K |
|
diff on DCNM for few vdcs showing error |
|
Checkpoint diff not working with FCOE on 5k, 6k and 7k switches. |
|
DCNM POAP: Support for redundant AAA/DNS and Syslog |
|
POAP: Add port number for vCenter connections |
|
BGP configs in conformance diff after auto-config on fp/evpn leaves |
|
POAP: 1bzip Radius or TACACS config results in conformance diff |
|
Inconsistent show vlans when doing “show run” leads to POAP diff |
|
vPC definition & description inconsistency between FP & EVPN templates |
|
AAA diff generated after POAP |
|
Backbone VLAN syntax errors with backbone mode BDI. |
|
N7k: FP templates missing power supply options. |
|
Inconsistent show vlans when doing “show run” |
|
vlan 1 is not allowed to be configured on Admin VDC |
Cisco DCNM, Release 10.0(1), Caveats
There are no resolved caveats in this release.
The following table lists the Open bugs for Cisco DCNM, Release 10.0(1).
Bug ID |
Headline |
---|---|
Connection between Fex and N1k not shown for 2 layer vPC |
|
Topology view: Incorrect Discovery Port |
|
DCNMP: Interfaces are not getting discovered in Hafinum switch |
|
Upg: SAN reports missing from View page on upgraded setup |
|
UI grayed out after adding a network without any Org or Parts |
|
NVT: RP Array in n9k-spine template is not reflecting the change |
|
Spine hostname and interface tab info missing in POAP definitions |
|
ova upgrade:\"error: cannot contact server\" on localtime for standby dcnm |
|
Support for border-leaf and border-spine in Fabric Plan Provisioning |
|
Top-Down: Populate Vlan operation picking from incorrect vlan pool |
|
MSM: RBAC not supported for Def_SAN scope in MSM |
|
Patch:After removal of patch, Unable to login to DCNM due to \Auth Fail\ |
|
DCNM (10.0): OU_BASE missing on templates after upgrade |
|
Dashboard- >Compute/Storage topology print/export function broken. |
|
Custom report generation using Visio topology throws exception. |
|
DCNM 10.0(1): Import template does not set POAP and Publish option |
|
DCNM-10.0:delete the template from GUI does not remove it in file system |
|
Boolean Mandatory values show red (mandatory) asterisk next to checkbox |
|
DCNM DB lost during upgrade with non-default install location |
|
EMC-ENTRANCE:Upgrade from 723 to 10x with postgres will fail on RHEL 6.4 |