New and Changed Information
This table summarizes the new and changed features for the Cisco Nexus 9000 Series NX-OS Label Switching Configuration Guide, Release 9.3(x).
Feature |
Description |
Changed in Release |
Where Documented |
---|---|---|---|
MPLS QoS |
Added support on Cisco Nexus 9300-GX platform switches. |
9.3(5) |
|
MPLS strip |
Added support on Cisco Nexus 9300-GX platform switches. |
9.3(5) |
|
Proportional Multipath for VNF for Segment Routing |
Added the ability to advertise the VNF of a service network in the EVPN address family. This feature is supported on Cisco Nexus 9300-EX, 9300-FX/FX2, 9300-GX, and 9500 switches with 9700-EX, and 9700-FX line cards. |
9.3(5) |
|
Segment routing |
Added support for Layer 2 EVPN on Cisco Nexus 9300-GX platform switches. |
9.3(5) |
Guidelines and Limitations for Layer 2 EVPN over Segment Routing MPLS |
SRv6 Static Per-Prefix TE |
Added the ability to advertise multiple prefixes as a part of the same VRF through the route map. This feature is supported on Cisco Nexus 9300-GX platform switches. |
9.3(5) |
|
MVPNs |
Introduced this feature. |
9.3(3) |
|
Segment routing MPLS |
Added support on Cisco Nexus 9364C-GX, Cisco Nexus 9316D-GX, and Cisco Nexus 93600CD-GX switches. |
9.3(3) |
See the relevant chapters in this guide. |
MPLS Adjacency Statistics |
Added support for the hardware profile mpls adjacency-stats bytes command. |
9.3(1) |
|
MPLS Queuing |
Added support on Cisco Nexus 9300-FX2 platform switches. |
9.3(1) |
Configuring MPLS QoS |
MPLS QoS |
Added support for the default QoS service template to support the MPLS handoff. |
9.3(1) |
Configuring MPLS QoS |
NetFlow |
Added support for NetFlow Collector over segment routing on Cisco Nexus 9300-EX, 9300-FX, 9300-FX2, 9500-EX, and the 9500-FX platform switches. |
9.3(1) |
|
MPLS ECMP Load Sharing |
Added support for load sharing for port channel and ECMP based on labels. |
9.3(1) |
|
Segment Routing and GRE |
Added support to enable both, MPLS and GRE on the same device. |
9.3(1) |
|
Segment Routing OAM |
Added support for routing protocols and modified the CLIs for Nil-FEC type. |
9.3(1) |
|
Segment Routing |
Changed the command for configuring segment routing from segment-routing mpls to segment-routing. |
9.3(1) |
|
Segment Routing |
Added support for affinity and disjoint path constraints. |
9.3(1) |
|
Segment Routing |
Added support for explicit paths. |
9.3(1) |
|
Segment Routing |
Added support for explicit SR-TE policy. |
9.3(1) |
|
Segment Routing |
Added support for SR-TE ODN for a IPv6 overlay. |
9.3(1) |
|
Segment Routing |
Added support for adjacency SIDs on OSPFv2. |
9.3(1) |
Configuring Segment Routing |
Segment Routing |
Added support for Layer 2 EVPN on Cisco Nexus 9300 FX2 platform switches. |
9.3(1) |
|
sFlow |
Added support for a sFlow collector over segment routing for both default and non-default VRF. |
9.3(1) |
|
vPC multihoming |
Added support for vPC-based multihoming over MPLS on Cisco Nexus 9300-FX2 Series switches. |
9.3(1) |