- Preface
- New and Changed Information
- Overview
- Configuring Basic Interface Parameters
- Configuring Layer 2 Interfaces
- Configuring Layer 3 Interfaces
- Configuring Bidirectional Forwarding Detection
- Configuring Port Channels
- Configuring vPCs
- Configuring IP Tunnels
- Configuring Q-in-Q VLAN Tunnels
- Configuring Static and Dynamic NAT Translation
- Configuring IP Event Dampening
- ConfiguringIP TCP MSS
- Configuring Layer 2 Data Center Interconnect
- IETF RFCs supported by Cisco NX-OS Interfaces
- Configuration Limits for Cisco NX-OS Interfaces
- Index
Cisco Nexus 9000 Series NX-OS Interfaces Configuration Guide, Release 9.2(x)
- Updated:
- December 24, 2020
Chapter: Configuration Limits for Cisco NX-OS Interfaces
Configuration Limits for Cisco NX-OS Interfaces
The configuration limits are documented in the Cisco Nexus 9000 Series NX-OS Verified Scalability Guide.
Feedback